Yost Vises 480 8 Heavy Duty Utility Kombinovaný potrubný a stolný zverák Rúrka a stolný zverák 8 palcov

Name: Yost Vises 480 8 Heavy Duty Utility Kombinovaný potrubný a stolný zverák Rúrka a stolný zverák 8 palcov
Brand: Yost Vises
SKU: 0797734008364
Price: 745.46 EUR
Availability: InStock

Brand:Yost Vises

3.8/5

€
745.46

Úžitkový kombinovaný zverák na potrubie a stolný zverák série Yost Vises Apprentice má základňu otočnú o 360 stupňov a je možné ho upevniť na pracovný stôl, aby sa zabezpečila upínacia akcia pre nenáročné aplikácie. 360-stupňová otočná základňa s (2) aretáciami nastavuje smer čeľustí pre správne umiestnenie. Ručným dotiahnutím uzamykacieho gombíka na základni zaistíte jeho polohu. Zverák má liatinové telo s oceľovou lištou s U-kanálikom pre dlhú životnosť a má plochú časť, ktorá funguje ako nákova a dodatočná pracovná plocha. Horné čeľuste z tvrdenej ocele je možné pri opotrebovaní vymeniť a vstavané čeľuste z liatinovej rúry sú drážkované pre lepšie uchopenie. Čeľuste sa približujú alebo vzďaľujú od seba otáčaním rukoväte zveráka v smere alebo proti smeru hodinových ručičiek.

Suma

Pridať do košíka Kúpte teraz

EAN: 0797734008364

Kategórie Nástroje a domáce potreby, Elektrické a ručné náradie, Pracovné náradie, Ručné náradie, Vízy, Stolné zveráky,

ZÁRUKA: Dodáva sa s 1-ročnou obmedzenou zárukou a 90-dňovým vrátením. BEZPEČNOSTNÉ INFORMÁCIE: Nesprávne používanie zverákov môže spôsobiť vážne poranenie očí, rúk alebo iných častí tela. Zveráky musia byť správne nastavené a používané. Pred nastavením a použitím si prečítajte, pochopte a dodržiavajte všetky pokyny uvedené v príručke. KVALITA ZVERÁKOV YOST: Každý nástroj Yost Vises je navrhnutý tak, aby spĺňal vysoké štandardy kvality, pevnosti a odolnosti. Ceníme si kvalitu pred kvantitou a vyrábame produkty, ktoré sú bezpečné a ľahko sa používajú. Ponúkame doživotnú technickú podporu na podporu našej záruky kvality. AKO POUŽÍVAŤ: Uistite sa, že je zverák bezpečne pripevnený k pracovnému stolu a či je zaistený zámok otočnej základne. Otvorte zverák otočením rukoväte zveráka proti smeru hodinových ručičiek. Umiestnite predmet medzi zúbkované čeľuste. Zatvorte zverák otáčaním rukoväte zveráka v smere hodinových ručičiek, kým predmet nezapadne do zúbkovaných čeľustí, a pokračujte v uťahovaní, až kým nebudete môcť predmet pohnúť. Neuťahujte príliš, pretože by to mohlo poškodiť predmet alebo zverák. Po dokončení práce na predmete otočte rukoväťou skrutky proti smeru hodinových ručičiek, aby ste predmet uvoľnili. OTOČNÁ ZÁKLADŇA: 360-stupňová uzamykateľná (prevodová) otočná základňa s (2) aretačnými západkami upravuje smer čeľustí pre správne umiestnenie; Upevňovacie úchytky základne: (4) x 11/16 (montážny materiál nie je súčasťou dodávky). TECHNICKÉ ŠPECIFIKÁCIE: Šírka čeľuste: 8. 0 x Otvor čeľuste: 7. 50 x Hĺbka hrdla: 4. 5”; Kapacita rúry: 1/8 x 3 Priemer, čeľuste rúry sú zaliate; 0. 67”D X 10. 4” dlhá rukoväť s gumenými nárazníkmi; 4. 13” X 3. 63” búšenie povrchu. KOMBINOVANÝ ZVERÁK: 8-palcový úžitkový zverák Yost Vises 480 na rúrku a stolný zverák je vyrobený z 30 000 PSI liatiny zo šedej liatiny s oceľovou U-kanálikou. Je vybavený veľkou pracovnou plochou nákovy, má tiež vymeniteľné zúbkované horné čeľuste z kalenej ocele a trvalú zúbkovanú čeľusť na potrubie s veľkou kapacitou potrubia.

Brand	Yost Vises
Color	Blue
Item Dimensions LxWxH	11 x 11 inches
Item model number	480
Item Weight	80 Pounds
Manufacturer	Yost Tools
Material	Cast Iron with Steel U Channel Bar
Style	Heavy Duty

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Doug Wade

Very nice vise. A lot more sturdy than I thought it would be

Shipped as advertised. Will last for years. The plastic pieces to fit on the jaws was not in my box.

Scritto da: Mike

Solid, sturdy, and smooth operation. Great vise.

I love this vise. I got the 5.5" one as an upgrade from my previous one which was often too small, or would slip on my workbench. My previous one was the kind that tightens itself on the the workbench but doesn't bolt in. The Yost 455 is the perfect size for my projects and allows me to bolt it down so it's easy to use. Let me share the bolts, washers, and locking nuts you will want to use for mounting this. There is some conflicting information in the Q&A and reviews. If you have a workbench where you can drill through the top, I can say definitively that the best way to mount it is use the base as a template and mark where the holes are in the base. Then use a 1/2" drill bit to drill holes through the tabletop. I used the following hardware which should work for anyone. You'll just need to adjust the bolt length for the width of your tabletop. Bolts: 1/2 in.-13 x 2-1/2 in. Hex Bolt (2.5" was the right length for my tabletop, you made need shorter or longer) Washers: 1/2 in flat washers with a 1 in outer diameter (OD) (1/2" inner diameter) Locking nuts: 1/2 in.-13 Nylon Lock Nut All the mounting hardware set me back about $11 at the local orange colored hardware store. It would have been nice if the hardware was included, but the vise itself is a great value regardless.

Scritto da: John Farrington

Solid and well made.

This is a solid and well made vise. Smooth, easy operation. This should last for years.

Scritto da: Tony

Good Value

I bought this blue Yost 455 Vise about 1 year ago and I am very happy with it. Most of my work is light duty, so I mounted it on a wooden work bench with a 2 x4 frame. For my light duty needs, I used 1/2" hex bolts to minimize 2 x 4 wall thickness loss. I then bought the RUITOOL brand blue colored 5.5" Vise Jaws Nylon Vise Block with Magnetic Soft Jaws, and I'm very happy with these soft jaws too. The Yost 455 and these soft jaws are an excellent match for my bench needs. If using a 2 x 4 frame for vise fastening, think about using a drill press or portable drill guide so that the drilled holes are straight. .

Scritto da: BaronR

No need to spend more

Very sturdy and good features.

Scritto da: Jeff

Vise has all the features of a bench vise.

Fit and function are good, it only weighs about 35 lbs, which means for a 5.5” vise its a bit light. Weight equates to sturdyness when looking at vises. It will work well for my needs.

Scritto da: Mattamuskeet

Poor QC

I tried buying a vise local first at Harbor Freight (HF), but returned due to poor casting and I wasn’t impressed by Home Depot’s offerings. I ordered the Yost 455 after a lot of research. Out of the box, this thing is not the best quality. The jaws do not line up and there is a lot of slop when the jaw is open. It also came with a nick in the metal from the manufacturer. Like the 5” “Central Forge” HF vise, this one is made in China, but at least the jaws lined up with no slop on the HF and it was only $60 compared to $85. Still this one is better in comparison and a decent value. I just wish they still made quality items in the US at a reasonable price because nothing I have bought from China has been what I would describe as 5 star quality.

Scritto da: William A McHale Jr

Great value!

I swore off buying any more garbage from harbor freight and figured that meant paying a lot of money for items like this. Yost company is from MI, USA. I couldn't figure out for sure where this is made but I don't care because I installed and used it today and am extremely happy with it. Build quality, fit and finish look great. Super value.

Scritto da: BL

Awesome tool

This seems to be of great quality for the price. Others I searched for were either too expensive or looked to be of cheap quality. Shown is a picture of it bolted to my workbench. For it's size it can open fairly large and the pipe jaw area is very handy to have as well. Also love the rubber gromets permanently attached to the handle. Rotating function is very useful and locks securely into position.

Scritto da: Aaron D

Great For Light Duty Home Use

Great for light to medium duty. Have this in my garage on a makeshift work bench I made out of an old table that was going to be thrown out. Bolted to table fairly easy with 4 carriage bolts, nuts and washers. Jaws open and close smoothly and hold whatever I am working on very well.

Scritto da: Simon

Good bang for the$

Good quality for the price and company as been around for a while. No it’s not a top brand but it’s a really good starting point that will last you years.

Scritto da: Harywood

A Nice Vice for a Good Price

My son wanted a vice for Christmas. I did some research and aside from the expensive Record vises, the Yost provides good features and performance at an affordable price. He's really happy with it.

Scritto da: Paul

Hapy with my Yost vise

I am very pleased with my Yost vise. Build-quality and precision seem to be very good, and the price was very competitive.