YG-1 - L7284 Séria L7 zo zliatiny vanádu HSS so špirálovým hrotom, povrch bez povrchovej úpravy (svetlý), okrúhla stopka so štvorcovým koncom, skosenie zátky, veľkosť závitu M5-0,8, tolerancia D4

Name: YG-1 - L7284 Séria L7 zo zliatiny vanádu HSS so špirálovým hrotom, povrch bez povrchovej úpravy (svetlý), okrúhla stopka so štvorcovým koncom, skosenie zátky, veľkosť závitu M5-0,8, tolerancia D4
Brand: YG-1
SKU: 7535001187977
Price: 25.11 EUR
Availability: InStock

Brand:YG-1

3.7/5

€
25.11

Špirálový špicatý závitník HSS zo zliatiny vanádu YG-1 série L7 pre viacúčelové použitie. Nástroje z rýchloreznej ocele sú vhodné pre väčšinu aplikácií na všeobecné použitie a ponúkajú kombináciu tvrdosti a húževnatosti pre odolnosť proti opotrebovaniu. Nepovlakované nástroje majú len základný substrát bez akejkoľvek ďalšej úpravy alebo povlakov a sú vhodné pre širokú škálu aplikácií. Okrúhle stopky umožňujú použitie so širokou škálou systémov upínania nástrojov. Nástroje s rovnými drážkami umožňujú zhromažďovanie triesok v drážkach pri rezaní a sú vhodné pre väčšinu aplikácií v plytkých rezoch. Pravostranné rezné nástroje majú rezací mechanizmus, ktorý sa aktivuje, keď sa pohybujú v smere hodinových ručičiek. Použitie: Dobré pre oceľové odliatky a výkovky/tepelne spracovateľné legované ocele, nerezovú oceľ na voľné opracovanie, nehrdzavejúcu oceľ odolnú voči teplu a korózii/ventilovú nerezovú oceľ, odliatky z hliníkovej zliatiny, tvárnu liatinu/chladenú liatinu/meehanitovú liatinu/tvárnu liatinu. Vynikajúce pre nízkouhlíkové/bezuhlíkové obrábanie uhlíkovej ocele, stredne až vysoko uhlíkovej ocele.

Nie sú k dispozícii žiadne jednotky

EAN: 7535001187977

Kategórie Priemysel a veda, rezné nástroje, Závitníky, Špirálové hrotové závitníky,

Pravostranné rezné nástroje majú rezací mechanizmus, ktorý sa aktivuje, keď sa pohybujú v smere hodinových ručičiek. Nástroje s rovnými drážkami umožňujú zhromažďovanie triesok v drážkach pri rezaní a sú vhodné pre väčšinu aplikácií v plytkých rezoch. Okrúhle stopky umožňujú použitie so širokou škálou systémov upínania nástrojov. Nepovlakované nástroje majú len základný substrát bez akejkoľvek ďalšej úpravy alebo povlakov a sú vhodné pre širokú škálu aplikácií. Nástroje z rýchloreznej ocele sú vhodné pre väčšinu aplikácií na všeobecné použitie a ponúkajú kombináciu tvrdosti a húževnatosti pre odolnosť proti opotrebovaniu.

Batteries Required?	‎No
Certification	‎Ansi
Customer Reviews	4.6 4.6 out of 5 stars 48 ratings 4.6 out of 5 stars
Domestic Shipping	Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
Finish	‎Uncoated
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎L7284
Item Package Quantity	‎1
Item Weight	‎0.32 ounces
Manufacturer	‎YG-1 Tool Company
Material	‎High-speed steel
Measurement System	‎Metric
Package Dimensions	‎2.9 x 0.4 x 0.2 inches
Part Number	‎L7284
Size	‎M5
Special Features	‎Single End

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Curtis

Like a hot knife through butter in Aluminum!

I had originally purchased comparatively expensive set of taps from another company, and found that those taps were incredibly dull, but decided to proceed with them anyway. I ended up breaking the dull tap in an aluminum extrusion. After that happened, I went on the search for another brand that looked like they were pretty good quality, and landed on this guy. Fearing the worst, I ordered multiple so that I wasn't left without a tap in case one broke. When they arrived, I opened up the first one, installed it in my tap handle, and started tapping the first hole. This thing cut so easily, I thought I had messed up and grabbed one of the extrusions I had already tapped! After the first hole cut so easily, I decided to give it a shot with power tapping using my M12 drill, and to my surprise it cut all the way down without a single issue, even on high-speed (which has VERY little torque). I ended up tapping about 30 holes in a matter of minutes, with a single tap. I'm definitely keeping the rest that I ordered for future use, and I'm incredibly impressed by how sharp and well made these are! I've recommended this tap to multiple people already that are using it for the same thing I am (building a 3D printer from scratch), as many of them have had poor experiences with taps themselves. This is a wonderful product, and I would recommend it to anyone!

Scritto da: The Good Life

Very sharp and great at clearing chips through a hole.

I was able to tap 1083 holes with this thing through 1/2" thick aluminum like a hot knife through butter. I was amazed it held up as long as it did. Normally I will snap a tap long before that many holes were tapped. If you are attempting to tap through holes and looking for a great tap then look no future you found it.

Scritto da: dmann

Tapped in Stainless

I used this to tap a hole in stainless steel to hold a carbide tip for wood turning. Use cutting oil and go slow it will thread fine..My last HSS bit cracked it half so this was an improvement.

Scritto da: David

Anything from YG-1 is fantastic highly recommend! Bought all of them..

Anything from YG-1 is fantastic highly recommend! Bought all of them..

Scritto da: Arianna

Nice tap..

Nice tap I wish they had more I would’ve purchased several. Mostly like the form taps for new threads but for recutting you need one of these and they’re good and sharp.

Scritto da: outcorneru

Like a hot knife through butter

I use it on aluminum extrusions with a drop of Tap Magic Aluminum cutting fluid. Like a hot knife through butter! Couldn't be happier with the results. Very little effort and no binding or breakage. Will be buying more of these.

Scritto da: Healthy Skeptic

Nice tap

Good quality tool. Did the job cleaning out some titanium threads on a $2000 bike frame.

Scritto da: G. Lowitz

but I highly recommend it for tapping thermoplastics such as acrylic

I'm using this tap to thread thousands of holes in .220"-thick acrylic. Having tried several brands, this tap is sharp, provides clean threads, and minimizes build-up of shredded acrylic on the tap itself. I can't say how it holds up in steel or aluminum, but I highly recommend it for tapping thermoplastics such as acrylic, so it's 5-stars for my application.