SP Ableware Cane Valet Držiak na palicu (703240050)

Brand:SP Ableware

1.5/5

38.97

Tento držiak na palicu sa používa na zavesenie alebo zaklinovanie palice a je to malá plastová armatúra, ktorá sa pripevňuje na palicu a drží ju na okraji stola, keď sa nepoužíva. Držiak sa zacvakne na trstinu a posúva sa nahor alebo nadol, aby sa dotýkal hornej alebo spodnej časti stola, a je všestranný na použitie v pároch na kontakt s vrchnou aj spodnou časťou stola. Okolo koncových háčikov je možné umiestniť malú gumičku na udržanie lepšieho uchopenia drieku palice. Držiak má rozmery 8,5 x 4,0 x 1,0 palca (D x Š x V). (L je dĺžka, horizontálna vzdialenosť zľava doprava; W je šírka, horizontálna vzdialenosť spredu dozadu; H je výška, vertikálna vzdialenosť od najnižšieho po najvyšší bod.) Ableware sa špecializuje na domácu zdravotnú starostlivosť a rehabilitačné produkty pre seniorský, invalidný a rehabilitačný trh. V Spojených štátoch sme boli uznávaní ako najväčší výrobca pomôcok pre každodenný život (ADL). Ableware pokračuje v navrhovaní a výrobe produktov, ktoré zvyšujú mobilitu, maximalizujú nezávislosť a umožňujú ľuďom žiť hodnotnejší, dôstojnejší a bohatší život.

Všestranné použitie v pároch na kontakt s vrchnou aj spodnou stranou stola. Prichytáva sa na trstinu a posúva sa nahor alebo nadol, aby sa dotýkal hornej alebo spodnej časti stola. Malé plastové kovanie na pripevnenie na trstinu, aby ho držalo na okraji stola, keď sa nepoužíva. Malá gumička môže byť umiestnená okolo koncových hákov pre udržanie lepšieho uchopenia trstiny. Držiak na zavesenie alebo zaklinenie palice.
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item model number 703240050
Manufacturer MADJI
Product Dimensions 2 x 2 x 0.75 inches; 0.8 Ounces

1.5

8 Review
5 Star
16
4 Star
0
3 Star
16
2 Star
46
1 Star
22

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: D.J.
Spend Most Of Your Time Worrying About It Falling
'Barely' worked. Surprisingly (to me anyway), every table/desk I tested this on had a beveled edge. This product does not do well with beveled edges because this product has to reach so far to get past the beveled part to get to the actual 'top' of the table that only a very small part of this product is actually touching the top of the table. So this makes the cane swing very far under the table, which means the cane is at about a 45 degree angle, which means that this product is at about a 45 degree angle and therefore VERY close to slipping off the table. My dad and I had to place it absolutely perfectly on the table so there would be no swinging at all when we let go, otherwise it would slide off. And even when it didn't slide off, it sure acted like it was ready to slide off at any minute. The material wasn't a grippy, rubber type material like would be expected either. It was actually fairly smooth (which increases slipperiness). This was very surprising. There were two of these slats included in the package and they suggested trying one slat above the table and one below, that was supposed to hold it a bit tighter by kind of gripping the table. Well two problems with that... 1) Different tables have different thicknesses so you'd have to adjust one of the slats when you sit at different tables, and 2) When I tried this, it didn't help. If the slats were a bit longer, or they put rubber grippers under the slats, or it was made out of a rubber-like material, it'd probably work better. But my experience was that my dad would spend more time worrying about it falling on the floor than he would spend finding a place to prop his cane up in the first place. Can not recommend it.
Scritto da: DK
There are two in the package.
I bought two because the description says "The holder" (singular) and the reviews say you need a pair. There are two in the package so now I am stuck with an extra pair. I will update the review after I see how they work.
Scritto da: BettyL
Tabling your Cane
This product works fairly well; however, you really need TWO! You leave space between the two--as shown on the product page; this clamps between the top and bottom layer of a table & is adjustable as to thickness.
Scritto da: Carl Franklin, JD/PhD
Good for those who use a cane or walking stick.
Works just like the advertisement. I tried using a single rubber piece, and it worked okay most of the time. With two in place you get a lot better grip. I also use an aluminum walking stick that I purchased years ago when I would go hiking a lot. This piece has actually been very helpful for me on a hiking trail. I can put the walking stick on a nearby tree branch of other "flat" surface to keep from laying my instrument on the ground.
Scritto da: Brumby Mcgehee
Doesn't work
One half of it will often hold a cane on a counter if the flat side of it is down.
Scritto da: Steven Fuller
This is a terrible product it fell of the cane with in the ...
This is a terrible product it fell of the cane with in the first hour of use and was lost due to breaking
Scritto da: Bernie Saunders
The Cane Valet/Cane holder is a great thing. When you slide it on to the ...
The Cane Valet/Cane holder is a great thing. When you slide it on to the table it stay there or at a counter it will stay there, etc. Thank you.
Scritto da: AlliFlowers
Does not work
Does not work. Too short to put around a table and actually hold the cane immobile.

Súvisiace produkty

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array