Sierra International 35-SS625 Marine-Grade z nehrdzavejúcej ocele Panther Safe-Skeg pre prívesné motory Select Force, Honda, Mercury/Mariner, Nissan, Tohatsu a Yamaha

Brand:‎Sierra International

3.8/5

140.19

Sierra International 35-SS625 Námorná nerezová oceľ Panther Safe-Skeg pre motory Select Force, Honda, Mercury/Mariner, Nissan, Tohatsu a Yamaha Či už chcete chrániť svoj nový skeg, opraviť poškodený alebo len chcete pridať trochu lesku, konštrukcia z nehrdzavejúcej ocele 316 Marine-Grade Sierra Panther Safe-Skeg je brilantne vyleštená a inštalácia trvá len niekoľko minút! Sierra ponúka celý rad Ultimate Skeg Protection and Repair. ĎALŠIE PODROBNOSTI • Ponúka ochranu z nehrdzavejúcej ocele 316 morskej triedy • Brilantne leštené s bezšvovým dizajnom • Obsahuje odtokový otvor na ochranu pred koróziou a zamrznutím • Inštalácia trvá len niekoľko minút • Hrúbka materiálu: 1,5 mm (o 50 % hrubšia ako konkurencia) • Sklznica nie je potrebná kvôli extra hrúbke materiálu Safe-Skeg • Súprava obsahuje: Safe-Skeg, montážny materiál, pokyny, imbusový kľúč a Loctite 262 INFORMÁCIE O APLIKACII •Navrhnuté tak, aby sa hodili: Force Outboard – 70-90 HP (od Mercury), 2-taktný prívesný motor Honda od rokov 1998 až 2002 – 75-90-115 HP, 4-taktný prívesný motor Mercury/Mariner – 50-60 HP (Big Foot), 2- a 4-taktný od rokov 2003 cez súčasný prívesný motor Mercury/Mariner – 70-75-80 HP, 2- a 4-taktný od rokov 1984 až po súčasnosť Mercury/Mariner prívesný motor – 70-90-100-115-125 HP Optimax, 2 a 4-takt od rokov 1983 až po súčasnosť Nissan Prívesný motor – 70-90-115-120-140 HP, 2-taktný od rokov 1983 až po súčasnosť Tohatsu Outboard – 70-90-115-120-140 HP, 2-taktný od rokov 1993 až po súčasnosť Yamaha Outboard – 60-70 80-90-100 HP, 2 a 4-takt od roku 1998 do roku 2001 O SIERE Sierra sa venuje ochrane vás a vašich investícií. Už 50 rokov Sierra, jedno z najdôveryhodnejších mien v námornom priemysle, hrdo ponúka vysoko kvalitné diely motora a pohonu. Ich produkty spĺňajú alebo prevyšujú časť pôvodného vybavenia, ktorú nahrádza, a sú navrhnuté tak, aby spĺňali súčasné požiadavky na motory s vysokým výkonom a zároveň odolávali drsnému morskému prostrediu. SIERRA. /b> Všetky diely Sierra sa kvalifikujú pre Sierru. Sierra ručí za to, že jej produkty budú bez chýb v spracovaní a materiáloch počas životnosti produktu. Sierra bezplatne opraví alebo vymení chybný produkt. podmienky a obmedzenia. Môžete si pozrieť Sierru.

Hrúbka materiálu: 1,5 mm (o 50 % hrubšia ako konkurencia). Pre: Vyberte lodné motory Force, Mercury/Mariner, Nissan, Honda, Tohatsu a Yamaha. Úplné informácie o aplikácii nájdete v popise produktu nižšie. Obsahuje odtokový otvor na ochranu pred koróziou a zamrznutím. Brilantne vyleštené s bezšvovým dizajnom. Súprava obsahuje: Safe-Skeg, montážny materiál, pokyny, imbusový kľúč a Loctite 262.
Brand ‎Sierra International
Country of Origin ‎USA
Customer Reviews 4.7 4.7 out of 5 stars 1,132 ratings 4.7 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎35-SS625
Item Weight ‎1.62 pounds
Manufacturer ‎MARINETECH PRODUCTS INC.
Manufacturer Part Number ‎35-SS625
Model ‎35-SS625
Product Dimensions ‎0.75 x 9 x 18 inches

3.8

13 Review
5 Star
82
4 Star
11
3 Star
4
2 Star
1
1 Star
2

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: PPL who love the South West
Awesome for repairing accident damagd!
Last year after a long weekend at the lake in haste to beat a storm. We jumped in the truck after securing my boat. I for got to raise the outboard. I didn't realize it until after 5 miles of driving. The Skeg was destroyer. I found this product t asked me thousands of dollars. In 20 minutes. Follow the instructions step by step to achieve desired results.
Scritto da: Christian
A++++++
A++++++
Scritto da: Brock Eggleston
Saved my lower unit due to cracked skeg
Skeg on Lower unit had cracked due to hitting a rock. Installed this and it not only looks great it works well. Was easy to locate and install onto the lower unit. Stainless steel fasteners look very nice
Scritto da: DRay
Awesome product
I installed it in the beginning of the season with ease. Probably half hour install. Much thicker and heavier than I imagined. It looks fantastic and add lots of character to my boat when on the trailer. It also helps steering as my other skeg broke off from previous owner. No welding was going to be considered for this aluminum area by me so this is really only option. And I’d recommend it for sure
Scritto da: Chuck
Easy to install, quick fix for a broken skeg.
I bought a SeaRay 180 BR with a 3.0 liter Mercruiser last fall from a dealer that had it on consignment. I saw that it had a big chunk broken out of the rear of the skeg so I almost passed on it. The sales guy (a friend of mine) said just install one of these and it will be good as new. It was super easy to install. Just file off any burrs or divots, tap it in place with a rubber hammer and drill the mounting holes. One little trick I have learned over the years is to use a center punch on the aluminum first to center the drill in the holes on the fitting and keep if from "walking". Then start drilling with a smaller drill bit than the final size. Drill about half way through with the small drill then go to the other side and drill the rest of the way through. The first pilot hole you drilled from the first side will help direct the drill back to the center. When you use the recommended drill size to drill the final hole it will hit the other side dead on.
Scritto da: Kindle Customer
looks great
Does exactly what it says
Scritto da: andrey
Easy installation, perfect fit
Easy installation, perfect fit
Scritto da: Kenneth Baca
A must if your operating your boat in low water level.
Easy install a must for boats that operate in shallow water.
Scritto da: Hootie57
Easy to install
Solid piece to help repair my Skeg after we had found some “hard water” during the last trip out. Fitment was a little off but made a few small modifications and seemed to work well. I’ve used a lot of panther products in the past and they’ve never disappointed
Scritto da: Bev
Fit on a Mercury Classic 60
So although not designed for my 87 Mercury Classic 50, (45 hp 2 stroke, 4 cyl 45 hp) I was able to grind my old front edge slightly and get a great fit. Based on my measurements and the manufacturers feedback, this is the one I chose. The 650 did not fit. This did. Great quality and value. Easy to install 30 minutes.
Scritto da: Marc Sarrazin
Super facile à installer
Parfait pour réparer la pièce briser
Scritto da: Edward W de Jong
Easy to install.
Great product.
Scritto da: Amanda
It was great to hide the damage we had done to our skeg.
Easy to install

Súvisiace produkty

hot
Originálny Hubometer Stemco - 650-0605
4/5

€ 133.60

Originálny Hubometer Stemco - 650-0605
4/5

€ 133.60

hot

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array