Rain Bird HPTCX kvapková závlaha Kombinovaná rezačka rúr/dierovačka 2 v 1 Kombinovaná rezačka rúr/dierovačka

Name: Rain Bird HPTCX kvapková závlaha Kombinovaná rezačka rúr/dierovačka 2 v 1 Kombinovaná rezačka rúr/dierovačka
Brand: Rain Bird
SKU: 0077985057947
Price: 39.36 EUR
Availability: InStock

Brand:Rain Bird

3.4/5

€
39.36

POPIS PRODUKTU Rain Bird HPTCX kvapkacia závlaha 2 v 1 Kombinovaná rezačka rúr/dierovačka. Tento časovo úsporný kombinovaný nástroj 2 v 1 vyrezáva a dieruje otvory v hadičkách kvapkovej závlahy. Odpružený dizajn s pohodlným ergonomickým uchopením; dierovač z kalenej ocele; a čepeľ z chirurgickej nehrdzavejúcej ocele. Uhlová obojstranná čepeľ vyrovnáva hadičky pre čistý, štvorcový rez, ktorý nemá za následok žiadne zubaté okraje alebo drvenie hadičiek. Ak chcete použiť funkcie rezania a dierovania: (1) stlačte dva konce, ktoré sa nerežú, k sebe (2) vložte hadičku do príslušného otvoru (3) stlačte/zatlačte na koniec rezania/dierovania. Pružinový dizajn automaticky zatvorí čeľuste po rezaní alebo dierovaní pre bezpečnosť a pohodlie pri skladovaní. Dierovač prepichne čistý otvor a zanechá hadicu bez nečistôt. Ideálne na prepichovanie otvorov v 1/2 alebo väčších odkvapkávacích hadičkách na inštaláciu všetkých druhov: kvapkačov/žiaričov, sprejov/hmly/bublinkových/nástavcových zariadení a 1/4 hadicových armatúr. Skvelé na rezanie LPDE rúr, vinylových hadičiek, kvapkacích zavlažovacích hadíc, namáčacích hadíc, čírych vinylových rúrok (CVT) a iných mäkkých rúrok do vonkajšieho priemeru 0,866 (22 mm). Vysoko viditeľná fialová farba umožňuje, aby bol nástroj ľahko viditeľný v tráve, pôde, kôre atď. Praktické plastové vrecko obsahuje (1) nástroj HPTCX. Rozmery nástroja: 8,4 dĺžka x 2 šírka x 3,5 výška. Rain Bird Inteligentné využívanie vody. OD VÝROBCU Rain Bird Corporation je súkromná spoločnosť založená v roku 1933 počas poľnohospodárskeho boomu v Kalifornii. Sme uznávaní ako výrobca a poskytovateľ zavlažovacích produktov a služieb číslo 1 na svete. S predajnými kanceláriami po celom svete; ponúkame viac ako 4 000 úsporných zavlažovacích produktov vo viac ako 130 krajinách. Rain Bird od samého začiatku vyrába a ponúka najširšiu škálu vysokokvalitných zavlažovacích produktov v tomto odvetví pre: farmy, golfové ihriská, športové arény, komerčné projekty a domácnosti. Za posledných 80 rokov získal Rain Bird celosvetovo viac ako 450 patentov. Vrátane prvého na zavlažovanie v roku 1935 na našom pôvodnom postrekovači s nárazovým pohonom (patent USA č. 1 997 901), ktorý spôsobil revolúciu v poľnohospodárskej výrobe potravín a otvoril novú éru v zavlažovaní na celom svete. V roku 1990 bol tento pôvodný postrekovač označený Americkou spoločnosťou poľnohospodárskych inžinierov za historickú pamiatku. Naše produkty pokrývajú všetky aspekty zavlažovania...časovače/ovládače, výsuvné rotačné postrekovače, vysúvacie postrekovacie hlavice, postrekovacie trysky, zavlažovacie ventily, kvapkové zavlažovanie, drenáž a mnohé ďalšie. Tieto produkty boli vybrané a inštalované po celom svete v najväčších a najprestížnejších projektoch pre rezidenčné, komerčné, poľnohospodárske a golfové zavlažovanie. Spoločnosť Rain Bird sa zaviazala k inteligentnému využívaniu vody™, ktorá presahuje rámec produktov až po vzdelávanie, školenia a služby pre priemysel a komunitu. Naším dedičstvom je navrhovať a vyrábať iba produkty najvyššej hodnoty a kvality. Sme vďační, že sme získali množstvo ocenení od mnohých našich vážených partnerov. Rain Bird „Inteligentné využívanie vody

Suma

Pridať do košíka Kúpte teraz

EAN: 0077985057947

Kategórie Terasa, trávnik a záhrada, Záhradníctvo a starostlivosť o trávnik, Zavlažovacie zariadenia, Automatické zavlažovacie zariadenia, kapkové zavlažovanie Súpravy,

Vysoko viditeľná fialová farba umožňuje, aby bol nástroj ľahko viditeľný v tráve, pôde, kôre, mulči atď. Vynikajúce ergonomické uchopenie. Prepichne čistý otvor a poskytne čistý štvorcový rez bez zubatých hrán alebo rozdrvených rúrok. Dierovač z kalenej ocele a čepeľ z chirurgickej ocele. Reže všetky veľkosti odkvapkávacích hadičiek a tiež dieruje otvory pre odkvapkávače a 1/4 tvarovky. Odpružený kombinovaný nástroj 2 v 1.

Country of Origin	Canada
Customer Reviews	4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Item model number	HPTCX
Item Weight	0.017 ounces
Manufacturer	Rain Bird
Product Dimensions	0.89 x 0.89 x 2.15 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Sandra

made my job easier

it made my job easier

Scritto da: Angel Douglas

Very small so dont lose it, worked good for what It was needed for

I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.

Scritto da: JS

Slow shipping.

Works great

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Bàká Hään

Useful tool

We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.

Scritto da: Flamsteed

I needed his

I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.

Scritto da: JNK

Blade works great, hole punch not so much

The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.

Scritto da: Saeng Fio Chao

Great handy tool

With all others tool, I find this is the best one

Scritto da: Ed

Don't forget the tool!

I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.

Scritto da: Annette Dreger

Very easy to use

Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!

Scritto da: Amazon Customer

retour imposible

J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item

Scritto da: DP Kindle Customer

It works!!

Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!

Scritto da: rferraro

Product description is misleading

I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....