QualGear CM2-W-100-P Držiak na viazanie káblov, biely

Brand:QualGear

3.5/5

21.53

POPIS PRODUKTU Držiak Klein Tools Bull-Pin Holder drží všetky štandardné ihly. Je vyrobený z kože a nitovaný, aby bol odolnejší. Držiak je možné pripevniť na opasok do šírky 2 palce (5,1 cm). Spoločnosť Klein Tools už viac ako 160 rokov vyrába ručné náradie profesionálnej kvality najvyššej kvality, ktoré poskytuje výkon, odolnosť a presnosť potrebnú na správne vykonanie práce. Naša rodina inžinierov, robotníkov a remeselníkov naďalej vkladá šesť generácií odborných znalostí do každého nástroja, ktorý vytvoríme, a to použitím len tých najkvalitnejších materiálov, vynikajúceho spracovania a výroby čo najbližšie k domovu. Klein nie je len názov našej spoločnosti, je to aj naše rodinné meno. A keďže sme americká spoločnosť, ktorá je rodinná, viete, že sa môžete spoľahnúť, že tu zajtra budeme. Klein Tools nevyrába len skvelé produkty, vyrábame skvelé produkty, ktoré vyhovujú požiadavkám profesionálov, ktorí ich používajú každý deň... Od roku 1857. OD VÝROBCU Kožený držiak na kolíky Klein 5417 je prinitovaný, aby zaistil dlhá a odolná životnosť. Držia všetky štandardné ihly a všetky Kleinove ihly. Je vyrobený z kože a má štrbinové pripojenie na opasok. Hodí sa na pásy so šírkou do 2 palcov a má celkovú veľkosť 3-1/4 x 11 palcov. Od roku 1857, spoločnosť prevádzkovaná Mathiasom Kleinom a jeho potomkami do piatej generácie, rástla a rozvíjala sa spolu s telekomunikačným a elektrotechnickým priemyslom, kde Kleinove kliešte prvýkrát našli hlavné využitie. Dnes Klein Tools, Inc. predstavuje oveľa viac ako Klein kliešte. Produktový rad spoločnosti sa okrem elektrotechnických a telekomunikačných oblastí rozšíril o prakticky všetky hlavné typy ručných nástrojov používaných v stavebníctve, elektronike, baníctve a všeobecnom priemysle. V medzinárodnom meradle sú produkty Klein dostupné po celom svete prostredníctvom dobre zavedenej siete agentov a distribútorov, ktorí skladujú produkty, ktoré sú potrebné pre ich konkrétne trhy. Povesť Kleina ako popredného výrobcu produktov profesionálnej kvality je celosvetová.

Celkové množstvo 100 ks. Šírka otvoru na uchytenie kravaty 4 5 mm. Priemer otvoru na skrutku 3 5 mm. Odolná plastová konštrukcia. Držiaky drôtu na upevnenie na sedlovú základňu káblovej spony.
Brand QualGear
Color White
Country of Origin China
Customer Reviews 4.4 4.4 out of 5 stars 295 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 4 x 4 x 1 inches
Item Length 4 inches
Item model number CM2-W-100-P
Item Weight 1.76 ounces
Manufacturer QualGear LLC
Material Plastic
Number of Pieces 100
Product Dimensions 4 x 4 x 1 inches
Style Saddle Type White 100 in Poly Bag

3.5

13 Review
5 Star
67
4 Star
18
3 Star
8
2 Star
2
1 Star
5

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Mary Ann
A little bit small
Should be a little bigger. If you mount with a drywall screw make sure you run it in perfectly straight. If not it is really tight to get zip tie in. I found some #6 screws that made it much easier to get zip ties in. Sill a good value. Note to manufacturer: I would rather pay a little more and have correct size screws be included.
Scritto da: Natasha Croston
Work well
Unlimited uses, come in handy for everything. I use these to mount wire to trailer lights, also used to hold wires on harnesses after the clips broke for marker light .
Scritto da: Tom G
Cable tie excessories - good to have
when buying cable ties, I make sure I have a variety of accessory parts to handle differnt cable support and securing arrangements. They complement the self-adhesive pads and cable ties nicely for wire management.
Scritto da: Sandy Y
These come in handy!!!
I don't know how I went so long without these. I live off of duct tape and zip ties as a single mom of two. these work wonders keeping cables for honestly anything in place. I would make sure it's screwed into a stud secure and solid fit.
Scritto da: NJN
No adhesive tape
Produce works as expected. I'm using 4 inch zipties with these holders to keep wires bundled together. They are small and do not have adhesive back. This isn't a problem as I'm using hot glue to affix them to walls and shelving. Good value for the money.
Scritto da: EJ
Great for hanging lightweight tube
I used these for hanging a pex style air system in my garage. They work great. I used #6 drywall screws to secure them to the wall and they allowed a zip tie to slip through and be tightened down. I'll end up using these for a lot of different things
Scritto da: Amazon Customer
6 STAR PRODUCT (1 star extra for the value)
I was pleasantly surprised how awesome this QualGear CM2-W-100-P Cable Tie Mount is. They were smaller than expected but that is a good thing! They fit standard ties although they seem that they may not. I use a #10 sheet rock screw and it works although it's not quiet flush with the recessed hole. The tie still makes it through. I tried it to hold down coax cable and it is strong bond. I would pay double the price--oops, hush! This is a blow-out bargain price and will have to order a few more bags before the price is raised. One of the best buys on Amazon for cable installers and DIYers.
Scritto da: S.768
Better for cable management than the clips.
Excellent for cable management, even for PC building. These are a lot better than cable clips because you can control the slack on the cables and give your cable runs a cleaner look.
Scritto da: Amazun hater
Needs correct size screws, be aware!
Theyre ok, but you need a certain size countersunk screw otherwise you CANNOT get the zip tie through,
Scritto da: Daiwamaster
Quality mounts !
As an electrician working on boats, I’ve installed close to a 1 000 of these cable mounts in the last 3 years. They are quality, same as the big brand name. These one will take a #6 pan head screw and fit up to a 14” cable tie. I mainly use #6x1/2” screws with a 8” 50lbs strength cable tie. This size of cable mount will look clean up to a single 4awg or multiple smaller gauges. A single 8awg is the smallest you can use before the tie doesn’t snug it down anymore. Also works well for communication cable, will hold a single (RJ45) Ethernet cable snug, but not a flat telephone cable. Works great with split loom as well up to 1/2”. Overall this is a quality product that has been consistent over several years of buying.
Scritto da: LCh
Make sure they fit your ties!
I got these without checking size, found out they don't fit jumbo size cable ties, only the 'normal' sized ones. But product wise, surprisingly great quality, their sides are thick, and does not flex unless you really try. They don't come with adhesive which is great as I find the adhesive ones never stay on for long, so I just screw them in. Fantastic clips!
Scritto da: Alex L Holland
Zip Tie saddle warnings
These are good little zip tie saddles. The mounting hole in the middle is fairly small so you cannot use larger screws for mounting them. The biggest problem is not the size of the hole the screw would go through but the countersinking hole where the head of the screw has to sit down in. If you cannot get the screw to sit down in the hole, the openings on either side that the zip ties will go through get blocked. Probably a #6 is the largest head that can be used with these saddles. It would be nice to widen them out to at least a #8 screw head.
Scritto da: Pinhead
A little smaller than I thought but works well.
The product is well made. It is a little smaller than I thought so very small screws are needed to allow strap in.

Súvisiace produkty

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array