Pyle 90°-30° uhol, sklon, nastavenie rotácie a masívny oceľový kolík slúži ako držiak držiaka reproduktora s bezpečnostným dorazom - dvojitý univerzálny nastaviteľný so vzdialenosťou 12,5'' od steny (PSTNDW15)

Name: Pyle 90°-30° uhol, sklon, nastavenie rotácie a masívny oceľový kolík slúži ako držiak držiaka reproduktora s bezpečnostným dorazom - dvojitý univerzálny nastaviteľný so vzdialenosťou 12,5'' od steny (PSTNDW15)
Brand: Pyle
SKU: 0068888754095
Price: 80.20 EUR
Availability: InStock

Brand:Pyle

3.3/5

€
80.20

Montuje sa natrvalo a bezpečne - Nastavenie uhla otáčania: ±30° - Nosnosť: 80 libier. Zavesí sa do 30'' reproduktorovej skrine Hĺbka - Vzdialenosť od steny: 12,5'' - Nastavenie uhla sklonu: 90°-30°. Univerzálna štandardná 1-3/8'' vložka sa hodí pre väčšinu reproduktorových skríň - pridaný masívny oceľový kolík slúži ako bezpečnostná zarážka. Obsahuje (2) univerzálne držiaky reproduktorov na stenu – zosilnená masívna tvarovaná oceľ pre veľké zaťaženie. Odolné, robustné a spoľahlivé - Bezpečné zavesenie reproduktorov na ploché povrchy stien - Predávané ako pár. DRŽIAK STOJANU DRŽIAK: Univerzálny držiak reproduktorov Pyle je pevná vystužená oceľová konštrukcia pre veľké zaťaženie. Montuje sa trvalo a bezpečne vo väčšine prostredí. PEVNÝ OCELOVÝ KOLÍK: Produkt je vybavený pevným oceľovým kolíkom na bezpečné umiestnenie reproduktora pripevneného k držiaku stojana. Podporuje hmotnosť reproduktora až 80 libier. a zabraňuje jej zrúteniu. 12,5'' VZDIALENOSŤ RAMENA: Má dĺžku 12,5'' palca od steny so základným meraním 5,25 W x 9,9 H. Bezpečne zavesí reproduktory na rovný povrch steny bez toho, aby sa dotýkali steny alebo vibrovali zo steny. Namontuje sa až do hĺbky 30'' reproduktorovej skrine. ODOLNÝ, ODOLNÝ A SPOĽAHLIVÝ: Ideálny odolný audio držiak pre hlasnú hudbu, PA reproduktory, štúdiový monitor s odolným, odolným a spoľahlivým kovom pre dlhodobé používanie. NASTAVENIE UHLU NÁKLONU 90°-30°: Dvojité nastaviteľné reproduktory na stenu Pyle sú nastaviteľné v uhle 90°-30°. Je zaistený pevným oceľovým kolíkom, ktorý slúži ako bezpečnostná zarážka a efektívne zdvíha reproduktory pre optimálny zvukový výkon.

Suma

Pridať do košíka Kúpte teraz

EAN: 0068888754095

Kategórie Elektronika, Príslušenstvo a potreby, Montáže, Montáže reproduktorov,

Brand	Pyle
Color	Black
Color Name	Black
Compatible Devices	Monitors, Speakers
Country of Origin	China
Customer Reviews	4.2 4.2 out of 5 stars 740 ratings 4.2 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	PSTNDW15
Item Weight	4.29 pounds
Material Type	Alloy Steel, Metal
Mounting Type	Wall Mount
Product Dimensions	3.75 x 15.5 x 10.25 inches
Special Feature	Adjustable

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Norberto Colon Seda

Good

Good

Scritto da: Doug Osborn

Delivered product fully matches as advertised

Delivered promptly. Product that arrived was as expected and quality seems good. I have not installed yet, but see no faults and expect no problems.

Scritto da: Matthew McCarn

Works ok…

Good: holds speakers up, paint was good, ok on adjustability. Bad: low quality, not very sturdy at all. If I planned to take them up and down ever, I would trash these and buy better quality. I added straps to the wall for fear they may fall at some point but they seem to be holding ok so far. Speaker’s definitely rock and lean if you touch it at all though

Scritto da: maintenance guy

STURDY EASY- TO-INSTALL SPKR BRACKETS

These are really sturdy & somewhat heavy- good solid iron (with plastic speaker base). Mounting capacity depends on what you get the anchor screws into. Studio-quality, not really living-room decor. Range of adjustment is just enough for directing SPL to desired areas. Arrived fast, good quality.

Scritto da: DadMan

Work Pretty Good.

Many people noted their knobs arrived either broken or broke shortly thereafter. Mine arrived intact and appear to be sturdy. Maybe they fixed the problem. I mounted mine on a sheet rock over studs wall. Two of the lag bolts are in studs and that's enough for support. The other two are just in the plastic inserts in the wallboard for cosmetics and to avoid a little vibration. The inserts that came with it are for concrete not drywall. They don't work in drywall and begin to spin as you're screwing in the lags. Get some drywall ones from the local hardware store if you're going to go that route. My Yamaha DBR 10 speakers spun a little too freely on the stud. I put a few wraps of electrical tape on them shore them up and all was well.

Scritto da: James Roszel

The brackets worked great and did what I needed them to do

The brackets worked great and did what I needed them to do. The only issue that I had was and this happened on several of them and had to have happened in shipping is the plastic knob for the pitch adjustment was broken right out of the box on several of the brackets. The knobs still worked but doesn't look very good when they are brand new brackets right out of the box and the knobs are completely broken. I would have to say that the quality of the plastic to make the knobs and the fact that the packaging had no internal padding also had something to do with it as well.

Scritto da: Lauren Weldon

Trustworthy and sturdy

These were a bit of a pain to install, as I didn't have studs in the locations I needed to install. I followed the instructions for drywall installation, and these things are so sturdy I can hang off of them with all my body weight. Used them for some annoyingly heavy/rugged PA speakers and they did the trick.

Scritto da: Darren M.

From a Professional Installer; steer clear of these!

I am a Professional AV Integrator for 22 years. The name PYLE invokes fear of the poorest or poor quality electronics and hardware! I knew this upon ordering; and wasn't surprised with the quality of my order after opening. First, toss ALL of the mounting hardware away. Go to Home Depot and purchase quality 1/4" x 3" Lag Bolts, washers and a package of Toggler Brand 1/4" Drywall anchors! Engineering and manufacturing of these Pyle mounts are very subpar. With six mounting holes, only three will can be used to attach to a single wall stud. The other three will require the Toggler Drywall anchors mentioned above. OR make your own wall plate to attach to the wall (just extra work when it shouldn't be). The assembly of the Pyle mounts are straight forward, but don't expect a nice tight fit. The sliding adjustable arms are loose and sloppy; you will notice your PA or Lighting leaning to one side due to the excessive slack. I corrected this by adding shims and also cinching down the rectangular opening with Channel Lock pliers. IF you plan on tilting your PA forward you will see that the two Plastic Knob Set Screws are way to light-duty to provide safe and secure locking of the sliding arm. I do not know the Load or Sheer Rating of these Set Screws but they are minimal at best. Matter of fact, the larger of the two Plastic Set Screws were to large for either threaded opening. An obvious oversight by Pyle. After all my modifications I feel that these will work for my application; a small recording and rehearsal room. However I would NEVER intend on installing these in Commercial project or in a client's home. T Simply too dangerous!!! Imagine a 45lb. PA falling a few feet down onto a child. As others said, pony up and purchase a quality mount. For me, I had the additional heavy-duty load bearing hardware in my van and was also able to make modifications on-site to insure a safe installation. Others beware!

Scritto da: Kasey hellawell

Showed up rusty and used

Can't believe what I opened up my box too! Rusty old nuts and bolts and what looks like salt damage to the finish. Stickers are scratched and torn. Honestly the worst product I've ever purchased. They where even kind enough to leave me a spare nut! That is also rusty! Save your money and don't buy this garbage. If it wasn't for me wanting to have my home theater setup and not have to wait I'd return these.

Scritto da: Yvan Arshoun

But I got mine with 2 different angles. I sent them back. In looking at the welding, they are a bit “sketchy”. I don’t know if the solder was verified, but I don’t think so. Its a cheap product, so be aware of the angles. If you don’t care then at the price they are (35$) they are all-right. It’s cheap, paint looks wobbly...

Scritto da: Robert Carnegie

It did the job but the diameters of the pole mount was inconsistent.

A major issue with these mounts was that the diameters of the pole mount was inconsistent. I was using 6 identical speakers, all of which fit roughly half the brackets. For the others I found the pole to be too large in diameter. To make it fit, I had to enlarge the pole mount socket on the bottom of the speakers.

Scritto da: Matt

Metal construction. That's about the only good thing so far.

Sorry, these had to go back immediately. The paint was scratched. The very obvious white-on-black labels were upside down. The plastic base left me with absolutely zero confidence it wasn't going to spontaneously crack. The construction reminded me more along the lines of a cheap metal desk from the office supply store. Although the price is great I wouldn't be caught installing these on anything of value.

Scritto da: Cliente de Amazon

Tubo milimetricamente mas ancho

El producto no cumple con la especificación, lo tuve que regresar por que el tubo es mas ancho y no asienta bien en una bocina Bose S1 Pro, no lo recomiendo si lo piensas usar para este modelo de bocina.