POWERTEC 71781 Univerzálne svorky na plot so 4 polohovacími štvorcami, sada svoriek pre 6 kusov so 4 štvorcami, 6ks

Name: POWERTEC 71781 Univerzálne svorky na plot so 4 polohovacími štvorcami, sada svoriek pre 6 kusov so 4 štvorcami, 6ks
Brand: POWERTEC
SKU: 0843441118909
Price: 60.72 EUR
Availability: InStock

Brand:POWERTEC

3.7/5

€
60.72

Univerzálne svorky na plot POWERTEC 71781 so 4 polohovacími štvorčekmi, sada 6 kusov. Univerzálne svorky na plot POWERTEC sú nevyhnutné, keď chcete rýchlo a jednoducho pripevniť pomocnú plochu alebo plot k existujúcemu plotu na vašej pásovej píle, stolovej píle, frézovacom stole, atď. Toto praktické zariadenie pevne zarovná novú pomocnú zábranu v jednej rovine s plotom stroja, čím zaisťuje ochranu a integritu oplotenia stroja aj píly. Inovatívna svorka je vhodne navrhnutá tak, aby vám neprekážala pri práci s drevom. Budete sa čudovať, čo ste kedy robili bez tohto časovo úsporného príslušenstva. Navrhnuté tak, aby sa zmestili na množstvo plotov s hrúbkou od 1/2 do 5-3/4 palcov. Praktické, spoľahlivé, mimoriadne odolné! Polohovacie štvorce POWERTEC, 4-palcové, 4-balenie, sú ideálnym riešením, keď potrebujete zarovnať dokonalé rohy pri lepení a montáži dreva. S vysokoúčinnou penovou plastovou konštrukciou, ktorá zaisťuje optimálnu odolnosť a nízku hmotnosť. Na rozdiel od kovových štvorcov tieto praktické doplnky nezničia vaše cenné pracovné materiály. Vytvorenie presnej 90-stupňovej drevenej konštrukcie, ktorá je taká nevyhnutná na zabezpečenie vyvážených výsledkov projektu, bude hračka. Rýchlo a jednoducho upnite na štvorčeky a môžete ísť. Vnútorná aj vonkajšia hrana týchto multitaskingových štvorcov môže slúžiť ako presné meracie vodidlá. A je toho viac. Reliéfna gradácia (v palcoch a milimetroch) je vylisovaná do štvorcov, aby poskytovala pohodlné vedenie merania. Praktický vnútorný zárez ďalej zvyšuje presnosť kvadratúry. So 4-palcovými polohovacími štvorcami POWERTEC budete mať presne to, čo potrebujete na vytvorenie dokonale štvorcových škatúľ, zásuviek, skriniek, rámov, nábytkových skriniek atď. Niektorí spracovatelia dreva dokonca považujú za užitočné ich zakomponovať do svojich prípravkov a prípravkov. Spokojnosť, vysoká užitočnosť, efektívnosť na druhú! príde vhod 4-balenie.

Suma

Pridať do košíka Kúpte teraz

EAN: 0843441118909

Kategórie Nástroje a domáce potreby, Elektrické a ručné náradie, Nástroje a príslušenstvo k elektrickému náradiu, Pílové listy, Náhradné diely a príslušenstvo, Accessories, Oplotky k pílam,

Funkcia polohovania štvorcov: Tieto štvorce sa najčastejšie používajú na zarovnanie dokonalých rohov alebo vytvorenie presných 90-stupňových pravých uhlov počas spracovania dreva a lepenia. Dizajn polohovacích štvorcov: Vyrobené z prvotriedneho penového plastu, ktorý je jedinečne ľahký, ale má tiež vysoké nárazové vlastnosti, ktoré nekazia a v porovnaní s kovovými verziami časom nekorodujú. Funkcia svoriek plotov: Umožňujú vám rýchlo pripevniť širokú škálu pomocných plotov k vašej existujúcej stolovej píle, pásovej píle a fréze bez toho, aby prekážali alebo vám prekážali v prídavnom materiáli, čepeli alebo vašich rukách. Dizajn svoriek na plot: Navrhnuté tak, aby sa zmestili a prispôsobili sortimentu plotových systémov pre stolové píly v rozmedzí od 3/4” do 5-3/4” hrúbky. OBSAHUJE: (2) Univerzálne svorky na plot a (4) 4” polohovacie štvorce (červené).

Batteries Required?	‎No
Brand	POWERTEC
Country of Origin	‎Taiwan
Customer Reviews	4.6 4.6 out of 5 stars 528 ratings 4.6 out of 5 stars
Included Components	‎INCLUDES:
Item Dimensions LxWxH	7.5 x 6.25 x 4 inches
Item model number	‎71781
Item Package Quantity	‎1
Item Weight	‎1.54 pounds
Manufacturer	‎POWERTEC
Part Number	‎71781
Product Dimensions	‎7.5 x 6.25 x 4 inches
Style	Clamps with 4" Squares, 6pk
Style	‎Clamps with 4" Squares, 6pk

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Wildlife

these are great clamps, well made

I use them to hold an addtional wood fence on my table saw. they are very well made, tighten easily and can be removed quickly. If you have a woodshop, these are a super accessory to have for many saws, routers etc. Ordered another set as soon as I saw the quality and had put them to use.

Scritto da: N

Good product

Just received these clamps. Seem to be solid and should last for a long time. I took one star off because the package arrived in a padded envelope inside which was the Powertec box containing the clamps. However, the box was open and the clamps were in the box (no plastic ziploc bag). They showed signs of scuffing and minor scratches. I dont think any of this will affect the functionality of these clamps, but I expected items to arrive looking brand-new. and they didnt.

Scritto da: H.E. Hendrix

Great clamp

Holds like it should. Very easy to use

Scritto da: Amazon Customer

Great substitute for other *Name Brand* product

I bought two sets of clamps. They are compatible with some Rockler corner brackets. Good value for the cost. Just like most items that are threaded together, If you over tighten them, they are aluminum and may bend or break. So don’t do that.

Scritto da: Greg

Great for zero-clearance fence

Worked great for table saw & router table zero-clearance fence. A quick tip -- drill the holes for the clamp arms to allow the square clamp body to sit flush to the edge of the fence so that as you tighten the clamp nut, the clamp doesn't roll on you.

Scritto da: David B

perfect clamps at a very reasonable price

I purchased these clamps to work with two, homemade jigs for my wood shop. The first is a small hole-drilling jig for my drill-press. These clamps hold it securely on the metal table of the drill-press without getting in the way of the spindle. The second is a sacrificial fence attachment for my table saw. Again, I can clamp the auxiliary fence to the saw's fence without getting in the way of the stock, my hands or the blade. Given time, I will probably find more ways to use these clamps. As they say, you can never have too many clamps in the shop.

Scritto da: BML

Rockler better machined for same price

These are essentially a clone of the Rockler clamps, which I purchased from Amazon a decade ago, in 2011. I needed another pair and these had fast Prime shipping, but it was a mistake to order them. See the side by side and close up photos of each. Powertec in black and Rockler in blue. First, the machining and anodizing of the Rocker clamps are much better. The Powertecs are rough - you can easily see machine marks while the Rocklers are smooth. The Powertecs have sharp edges while the Rockers are slightly rounded over - even the bore for the threaded piece is chamfered on the Rockler but not on the Powertecs. Finally, the anodizing on the Rockers is much higher quality - the Powertecs apear to be painted rather than anodized. BTW, ignore the mastic tape on the feet of the Rocklers, I added that to not dent workpieces as readily. Powertec has similar feet. As for the manufacturer's boast about being bent at 95 degrees to pull tighter and flatter, that's true BUT the Rocker's also are overbent. See photos against my Bridge City Tools square. I'd guess the Rocker's are only bent to 93 degrees, but that's plenty and may even be better in some situations. As long as they are slightly more than 90 degrees you're good, IMO. Anyway, these are going back and I'm ordering another pair of the Rocklers again. These ain't bad, but for the same money you can get better.

Scritto da: Dawn Hathaway

Great DIY'er carpenter companion.

Hubby loves wood working projects and these sure come in handy.. Well made..

Scritto da: sundown

... are made out of heavy duty material and look like they will do the job

These clamps are made out of heavy duty material and look like they will do the job. I am a wee bit curious why the screw tang is not at right angles to the thread but it should not be a problem if the hole in the fence or stop block is drilled a bit over-size.

Scritto da: Anthony Randoll

Fonctionne bien

Ils n'ont pas pu s'adapter sur mon banc de scie général international avec le guide Excalibur, mais sur un second banc de scie avec un guide standard c'est parfait

Scritto da: Michel691

Five Stars

très solide et bon pour supporter certains projets. Ce sont de très bond outils de qualité professionnelle. Merci!

Scritto da: Ryan and Anna

Makes set up easy and quick now in the shop

Just what I needed to get a sacrificial fence clamped tight to the original fence. Makes set up easy and quick now in the shop.

Scritto da: Amazon Customer

Well build compared to others cheaper alternatives.. The ...

Well build compared to others cheaper alternatives.. The body is solid metal and the threads are strong. Worth the price!