Orbit 58136N Zásuvné mosadzné spínacie nástroje so svorkami

Brand:Orbit

3.6/5

27.01

Od výrobcu Orbit je popredná spoločnosť v Severnej Amerike pre zavlažovanie domácností. So zastúpením vo viac ako 180 krajinách a na 6 kontinentoch ponúkame najkompletnejší ekosystém riešení naprieč hadicovými kohútikmi, hadicovými kohútikmi, koncovkami hadice, podzemnou ochranou, kvapkaním, hmlou a ochranou dvora. Už viac ako pol storočia vedieme v tomto odvetví v inovatívnych riešeniach, pričom sme získali viac ako 100 aktívnych patentov a mnoho ocenení za uznanie v odvetví. Od PVC-Lock, Blu-Lock a Drip-Lock, ktoré predstavujú mimoriadne rýchly spôsob pripojenia postrekovacieho potrubia a odkvapkávacieho potrubia, až po naše technologicky vyspelé, najpredávanejšie inteligentné ovládače B-hyve, zmodernizovali sme toto odvetvie a nastavili štandard pre osvedčené postupy pri zavlažovaní obytných priestorov a zefektívnenie vonkajšieho zavlažovania pre domácnosti na celom svete. Hydro-Rain je špičkový komerčný a poľnohospodársky náprotivok Orbit, ktorý obsahuje ponuky BUILT FOR SPEED, ktoré sú navrhnuté špeciálne pre profesionálnych dodávateľov a pestovateľov. Orbit a Hydro-Rain spolu tvoria obchodnú jednotku v rámci divízie Gardena skupiny Husqvarna, ktorá spoločne zahŕňa najväčšieho svetového výrobcu zavlažovacích systémov pre domácnosti. Pretože zabezpečenie prístupu k bezpečnej sladkej vode pre komunity je globálnou prioritou, sme hrdí na to, že môžeme potvrdiť náš záväzok poskytovať komplexný ekosystém inteligentných riešení pokrývajúcich aplikácie OD FAUCETU AŽ PO FARMU, keďže neustále sledujeme víziu ZMENY SVETOVÉHO VODY. .

Nie sú k dispozícii žiadne jednotky
Len na vonkajšie použitie so studenou vodou. Svorka z nehrdzavejúcej ocele. Odolná mosadzná konštrukcia. Predlžuje životnosť vašej hadice. Opravuje koniec kohútika (samica) väčšiny 5/8 štandardných záhradných hadíc.
Brand Orbit
Customer Reviews 4.5 4.5 out of 5 stars 518 ratings 4.5 out of 5 stars
Exterior Finish Brass
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 4 x 4 x 2 inches
Item model number 58136N
Item Weight 0.08 Pounds
Item Weight 1.28 ounces
Manufacturer Orbit
Material Brass
Product Dimensions 4 x 4 x 2 inches

3.6

10 Review
5 Star
73
4 Star
15
3 Star
7
2 Star
3
1 Star
3

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Joanne S.
This one pivots
I was looking for a solid one that does not swivel or pivot. I use it anyway with a small leak because it is in a stressed position. Couldn't find a solid one , I guess, on Amazon.
Scritto da: Nate
Perfect Replacement Shank
This is a great replacement shank, glad I purchased it. The 3' lead in hose to my reel was accidentally split open by a sheet of plywood late last fall. I was going to purchase a new one but thought of going this route instead. I used a socket wrench to tighten the clamp in leiu of using a screwdriver as suggested by a reviewer; tight as a drum with no leaks whatsoever. Read from some that it's not as thick as it could be, which is true, but this was pretty much a once and done connection for me. Even if you had to replace it after every season, which I highly doubt, it would still be a lot cheaper than purchasing a new hose.
Scritto da: ThatMouse
Makes hand tightening harder, but works as advertised
Initially it was leaking around the two metal pieces. I had to wrench tighten it onto the spigot to stop the leak. The problem is the metal clamp gets in the way and digs into your hand screwing it on. I don't think this the greatest "brass" alloy, so I'll just watch it for corrosion.
Scritto da: Sirronalot
Very easy to install!
Wow. Usually it is so difficult to install these and this hose end was so easy to install and water tight! I am buying more! I rarely write reviews, but I am so happy with these hose ends, that it really inspires me to create better irrigation for my yard! I am very happy!
Scritto da: Glen Rasmussen
Easy to use.
Easy to use. Simply cut your old hose about a few inches from the connector. Install the clamp over the hose. Push the cut end of the hose over the tapered end. Slide the clamp over the end and tighten the philips screw. Install the end as you would a regular hose.
Scritto da: Dinko Perkovic
Does the job
I had to put hose end into boiling water to soften it enough and slide over this adapter; makes for tight connection, though. Not top of the line, but sturdy enough an decent value for the money; would recommend.
Scritto da: Whit
Ok
Meh. It’s ok for the price. I don’t know that I’ll order it again but for the price it’s ok. I add flex glue when ever I mend a hose so it’s definitely not leaking but I can tell it’s not very well made. Just glad the price was right.
Scritto da: GJSD
Light duty but it works well
7/13/19: Cut off the old hose end that was leaking (pin holes had developed in the metal), and replaced it with this. Works, doesn’t leak, but it feels like a light duty replacement. Should be fine for us as we don’t remove it more than a few times a year.
Scritto da: asif
Very useful
It solved my problem and working well
Scritto da: kerri
never deliveeed
was not included with the rest of the shipment

Súvisiace produkty

hot
Hrot na vedenie orbitálnej hadice 58189
3.4/5

€ 29.79

Hrot na vedenie orbitálnej hadice 58189
3.4/5

€ 29.79

hot
Vypínacia spojka Orbit 58087N 1
3.2/5

€ 21.62

Vypínacia spojka Orbit 58087N 1
3.2/5

€ 21.62

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array