0
0

Celkom:€ 0.00

Pozri košíkOdhlásiť sa
LoginRegister
0

Celkom:€ 0.00

Pozri košíkOdhlásiť sa
LoginRegister

Mophorn 10KG rotačný zvárací polohovač otočný stôl 110V mini 0 až 90° zvárací polohovač polohovací otočný tanier 2,5-palcový 3čeľusťový sústruh Skľučovadlo 180mm prenosný zvárací polohovač otočný stroj

Brand:Mophorn

2.6/5

€
526.65

Široká aplikácia: Dá sa upevniť na pracovný stôl alebo špecifické nástroje na upínanie obrobku ručným zváraním, možno použiť aj so zváracím strojom na dosiahnutie automatického zvárania, ale aj na rezanie, brúsenie, montáž, testovanie a iné procesy. Plynulé ovládanie rýchlosti: Pomocou nožného spínača na ovládanie otáčania stola sa rýchlosť reguluje pomocou gombíka na stroji (0,5-5 ot./min. plynulá regulácia rýchlosti). Trojčeľusťové zváracie skľučovadlo: Tri čeľuste sú zosilnené, aby sa zabránilo pohybu a pádu zvarencov. Je vylepšené, aby bolo presnejšie a praktickejšie. Sklopný stôl 0-90°: Otočná štruktúra závitovky a ozubeného kolesa má funkciu samosvornosti a pracovný stôl možno plynulo otáčať medzi 0-90°. Môže byť tiež pripevnený v ľubovoľnom uhle. Pracovná kapacita: 5 kg / 10 kg: Horizontálna / vertikálna nosnosť: 10 kg / 5 kg; Priemer/výška pracovného stola: 18 cm/7 palcov; 23,2 cm/9 palcov. Vyrobené z nehrdzavejúcej ocele, vyznačuje sa vysokou kvalitou a odolnosťou.

Nie sú k dispozícii žiadne jednotky

EAN: 0700721078738

Kategórie Nástroje a domáce potreby, Zváranie a Pájkovanie, Zariadenia na zváranie, Zváracie systémy,

Široká aplikácia: Dá sa upevniť na pracovný stôl alebo špecifické nástroje na upínanie obrobku ručným zváraním, možno použiť aj so zváracím strojom na dosiahnutie automatického zvárania, ale aj na rezanie, brúsenie, montáž, testovanie a iné procesy. Plynulé ovládanie rýchlosti: Pomocou nožného spínača na ovládanie otáčania stola sa rýchlosť reguluje pomocou gombíka na stroji (0,5-5 ot./min. plynulá regulácia rýchlosti). Trojčeľusťové zváracie skľučovadlo: Tri čeľuste sú zosilnené, aby sa zabránilo pohybu a pádu zvarencov. Je vylepšené, aby bolo presnejšie a praktickejšie. Sklopný stôl 0-90°: Otočná štruktúra závitovky a ozubeného kolesa má funkciu samosvornosti a pracovný stôl možno plynulo otáčať medzi 0-90°. Môže byť tiež pripevnený v ľubovoľnom uhle. Pracovná kapacita: 5 kg / 10 kg: Horizontálna / vertikálna nosnosť: 10 kg / 5 kg; Priemer/výška pracovného stola: 18 cm/7 palcov; 23,2 cm/9 palcov. Vyrobené z nehrdzavejúcej ocele, vyznačuje sa vysokou kvalitou a odolnosťou.
Brand Mophorn
Country of Origin China
Included Components 1x welding positioner
Item Dimensions LxWxH 14.6 x 14.4 x 12.6 inches
Item model number Welding Positioner
Manufacturer VEVOR
Product Dimensions 14.6 x 14.4 x 12.6 inches; 26.41 Pounds
Voltage 110 Volts

2.6

13 Review
5 Star
46
4 Star
11
3 Star
17
2 Star
8
1 Star
19

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: E. McCauley
replace the motor
I would have given 5 stars if the rpm wasn't so high. I replaced the motor on mine with one bought here on Amazon. You can select from several rpm ranges. The one I chose was the 40rpm one which slows the table down to 1.3 to 6.75 rpm. The last half of the adjustment knob there is little change though. It is a bit tricky since you need to remove the motor gear before you can get the motor out, and you are working down in a hole. I chipped off the dab of glue then used a Smith Little torch to heat the gear to smoking. I made a small gear puller as shown from a bent piece of aluminum to pull it off while hot. I will go back on the new motor cold with ease and you will need to put a dab of epoxy or otherwise to hold it. I also sanded the bottom rim where contact with the graphite/copper bar is as well as between the chuck and table. Degrease with brake cleaner at these locations for better electrical contact. Works well for small stuff which is what I bought it for. Mine is the one from Vevor.
Scritto da: Bill G
Functional with limits.
Construction is as expected but assembly leaves you wanting. Rotational speed is inconsistent. There seems to be a tight spot in the meshing of gears. Probably a center hole out of concentricity with pitch diameter.I have a machine shop, so, I can fix it but many won't be able to. Probably should have built it myself but was on a time constraint with this project.
Scritto da: toth welding
Good rotary table
The media could not be loaded. Was skeptical about buying this because of the reviews. Even bought a 40rpm replacement motor to slow it down incase it was too fast like people mentioned. Out of the box it worked good. Yes it slowed down enough to weld with. Didn't stop like people were saying. Also the ground clamp works good like it's supposed to. I did grind the paint off the bottom and clean any coating that was on the contactor for the ground. Since I had the 40rpm motor I put that on to try it and definitely was a good choice because it made it alot stronger with the lower rpm motor. I turned it way down and put pressure on it and the table kept turning. Definitely happy I bought it. Will post a video also
Scritto da: steve henle
Won't go slow enough.
Speed wont turn down slow enough so constantly have to toggle the foot switch. Would be much better if geared down more
Scritto da: Glenn Marchione
it works
Very low power but it spins and that's all we want it for.
Scritto da: Dirk Schimmel
Only works on the higher speeds
Not worth the money unless you only plan to use it on very small diameter tube or material. When you step on the pedal and slow it down to the speed you need for say 2” tube everything looks great. But as soon as you let off the pedal it won’t restart until you turn the speed control back up to a higher rpm. Not sure what the problem is but don’t buy it unless you need to weld very small parts in the higher rpm range.
Scritto da: Kenda Wehrly
Love it
Its is perfect for what I needed
Scritto da: Kimberly
Ok
Everything was great other than the knob was broken when opened
Scritto da: Thomas
Ok for rotating a piece with the ground clamp on the piece, not for welding using the turn table
Not very useful, rotating plate is not conductive enough. Even after sanding off the underside, which is non-conductive paint, you will still have issues with the coated steel under the lathe chuck. The lathe chuck sticks and is ok quality, I took it all apart, lubed and re-assembled it all, then cycled the chuck to break it in for it to be good. The motor is geared too low, resulting in 80% of the speed settings being unusable as it rotates too quickly. At low speeds there is no torque so it will get stuck trying to rotate. Perhaps it will work well for high speed MIG welding.
Scritto da: al burnham
it will be a miracle if it comes undamaged
i knew the was a sub par product but will do what i need it to do
Scritto da: cheryl
Fantastic!
This was a Christmas gift for my husband, which he asked for. He absolutely loves it!! Does exactly what its supposed to. It was a great purchase for me!
Scritto da: Spencer
Tried using it for tig welding and it went pop and now doesn’t work but for mig it was fine..
Doesn’t go slow very well had to clean the bottom plate so the ground wouldn’t stick and then the ground didn’t hold very well to the clamp overall works but not well
Scritto da: Deeanne Bouchard
Dont work in slow speed
It will not work in slow spend

Súvisiace produkty

hot
H & S Autoshot 4550 Starter Plus súprava zváračov svorníkov, žltá
3.7/5

€ 519.40

H & S Autoshot 4550 Starter Plus súprava zváračov svorníkov, žltá
3.7/5

€ 519.40

hot
Mophorn 10KG rotačný zvárací polohovač otočný stôl 110V mini 0 až 90° zvárací polohovač polohovací otočný tanier 2,5-palcový 3čeľusťový sústruh Skľučovadlo 180mm prenosný zvárací polohovač otočný stroj
2.6/5

€ 526.65

Mophorn 10KG rotačný zvárací polohovač otočný stôl 110V mini 0 až 90° zvárací polohovač polohovací otočný tanier 2,5-palcový 3čeľusťový sústruh Skľučovadlo 180mm prenosný zvárací polohovač otočný stroj
2.6/5

€ 526.65

hot
Oblúková zváračka XtremepowerUS 250 AMP Zváračka na kolesá Zváračka tyčou Maska s príslušenstvom Zváračka ARC 250
2.7/5

€ 504.89

Oblúková zváračka XtremepowerUS 250 AMP Zváračka na kolesá Zváračka tyčou Maska s príslušenstvom Zváračka ARC 250
2.7/5

€ 504.89

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array

Celkom:€ 0.00

Pozri košíkOdhlásiť sa

Kategórie

Všetky kategórie
Ponuka Kategórie Blízko Košík

Menu