Greenlee 645-001 ¼ palcov x 2-1/2 palcový vodiaci vrták používaný s frézami s priemerom 5/8 palcov až 2-1/4 palcov

Name: Greenlee 645-001 ¼ palcov x 2-1/2 palcový vodiaci vrták používaný s frézami s priemerom 5/8 palcov až 2-1/4 palcov
Brand: Greenlee
SKU: 783310057611
Price: 28.00 EUR
Availability: InStock

Brand:Greenlee

3.6/5

€
28.00

POPIS PRODUKTU Vodiaci vrták, veľkosť stopky 1/4 palca, tvar stopky Hex, vhodný pre dierovaciu pílu s priemerom 1/4 palca. 5/8 palcov do 2-1/2 palca, materiál kobaltová oceľ, veľkosť vodiaceho vrtáka 5/8 palca. priem. x 2-1/4 palca L, celková dĺžka 2-7/64 palcov, na použitie s frézami z tvrdokovu, obsahuje vodiaci vrták OD VÝROBCU Rýchlovýmenné frézy na otvory z nehrdzavejúcej ocele Greenlee rýchlo a ľahko režú nehrdzavejúcu oceľ. Rýchlovýmenný tŕň umožňuje výmenu nožových hláv jednoduchým stlačením a otočením. Používa rovnaký tŕň pre rôzne veľkosti rezných hláv. Odnímateľné rezacie hlavy sú dostupné vo veľkostiach od 5/8 palcov do 3 palcov. Prírubový doraz zabraňuje prevŕtaniu. Vyhadzovacia pružina na všetkých veľkostiach nad 3/4 palca uľahčuje odstraňovanie slimákov. Vymeniteľný vodiaci vrták z kobaltovej ocele s deleným hrotom, ktorý zabraňuje chôdzi. Presné karbidové zuby pre optimálny výkon a odolnosť. Minimálna veľkosť skľučovadla 3/8 palca. Rozmery položky sú ¼” x 2-1/2

Suma

Pridať do košíka Kúpte teraz

EAN: 783310057611

Kategórie Nástroje a domáce potreby, Elektrické a ručné náradie, Nástroje a príslušenstvo k elektrickému náradiu, Nástroje a príslušenstvo pre vŕtačky, Vrtačky Vrtáky, Vŕtacie korunky,

Vymeniteľný vodiaci vrták z kobaltovej ocele s deleným hrotom, ktorý zabraňuje chôdzi. Rozmery položky sú priemer ¼ palca x celková dĺžka 2-1/2 palca. Prírubový doraz zabraňuje prevŕtaniu. Použite rovnaký tŕň pre rôzne veľkosti rezných hláv. Rýchla výmena tŕňa umožňuje výmenu nožových hláv jednoduchým stlačením a otočením. Reže nerezovú oceľ rýchlo a jednoducho.

Assembled Diameter	‎0.63 Inches
Batteries Included?	‎No
Batteries Required?	‎No
Brand	Greenlee
Brand	‎Greenlee
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 336 ratings 4.6 out of 5 stars
Cutting Diameter	‎0.63 Inches
Domestic Shipping	Item can be shipped within U.S.
Included Components	‎Unit^Instruction Guide
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item Dimensions LxWxH	5.8 x 1.8 x 0.7 inches
Item Dimensions LxWxH	‎5.8 x 1.8 x 0.7 inches
Item model number	‎645-001
Item Package Quantity	‎1
Item Weight	‎0.845 ounces
Manufacturer	‎Greenlee
Material	Cobalt Steel
Material	‎Cobalt Steel
Part Number	‎645-001
Product Dimensions	‎5.8 x 1.8 x 0.7 inches
Shank Type	Straight
Shank Type	‎Straight
Size	‎Sizes 5/8-Inch through 2-1/4-Inch
Surface Recommendation	‎Alloy Steel
Thickness	‎11 Inches
Tool Flute Type	Straight
Tool Flute Type	‎Straight
Warranty Description	‎1 year manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Shane Caldwell

Works great for stainless steel

Never any problems with these bits and I use them on stainless steel all the time. A few people have problems with them breaking using a hand drill. If you are using these with the 645-011, the trick is to punch your pilot hole first without outer hole saw attachment. Most breaks happen when the outer hole saw first grabs the metal.

Scritto da: JERRY LAMERRILL

It did the job

I drilled a 9/16" hole through stainless and the pilot worked well to start the hole.

Scritto da: David Waters

super hard steel with a flaw

+These pilot bits are super hard. They will really cut steel. -These pilot bits are super hard. They will break with any accidental bending from a hand drill. I went through 3 of them in 5 holes. I drilled about 4 holes with the first one. The 2nd lasted 10 seconds. The 3rd lasted a little while longer (maybe one hole) because I was being super careful not to bend. I was drilling into steel (a vehicle frame), not stainless. They are probably well suited to a drill press. My recommendation is to drill the pilot hole with another 1/4 drill and use this for piloting purposes only. The hole cutter that this fits into is great. No issues.

Scritto da: Carlos Cabrera

Excellent

Excellent product

Scritto da: Drew Prelgauskas

Bits snap frequently

So the quick change kit is really nice, but the bit seems designed to snap so you will keep buying more. I've snapped 3 or 4 in the last 6 months. There is a step at the tip from 1/4" to about 3/16", probably to help with starting the initial hole. However, as soon as you make it through the first bit, the 1/4" part will grab and snap the bit if you're not perfectly straight with perfect trigger control. A regular 1/4" end would probably make the bit last way longer. I'll be looking for 3rd party bits from now on.

Scritto da: QDuck

Drills perfectly without need for center punch.

This pilot drill works great. No need to punch a center mark. Just place the center of the pilot drill where you want to drill, hold it steady and start drilling. I've done several holes in 18 gauge steel and each started exactly where I wanted with no wobble or tracking, exactly as advertised.

Scritto da: The Real OG

Reccomend

Good quality No issues

Scritto da: Maria G.

Good quality

Worked well.

Scritto da: Sparkbing

Must buy

Best bit on the market

Scritto da: Yanik

Très bien

Très bien