Frigidaire 5304458371 1 Výrobník ľadu

Name: Frigidaire 5304458371 1 Výrobník ľadu
Brand: FRIGIDAIRE
SKU: 0717449027580
Price: 197.98 EUR
Availability: InStock

Brand:FRIGIDAIRE

3/5

€
197.98

Triplett CBF200 je užitočný nástroj na obsluhu jednou osobou pre domácich a komerčných elektrikárov, domácich inšpektorov, inštalatérov kuchýň a kúpeľní, správcov bytov/bytových jednotiek, domácich majstrov a domácich majstrov. Nástroj je vybavený exkluzívnym porovnávacím režimom, ktorý identifikuje správny istič, aj keď sú sily signálu veľmi blízke. Prijímač funguje aj ako bezdotykový detektor napätia a vysielač tiež umožňuje používateľom odhaliť chybnú kabeláž v 3-vodičových zásuvkách a testuje GFCI na správnu činnosť. Jasné LED diódy náradia indikujú 6 porúch vedenia, vrátane Open Ground, Open Neutral, Hot/Ground Reverse, Open Hot, Hot/Neutral Reverse, Hot on Neutral s Hot Open. CBF200 umožňuje bezpečnú identifikáciu umiestnení ističov v akomkoľvek elektrickom paneli bez odpojenia napájania. CBF200 tiež umožňuje používateľom zistiť chybné zapojenie v 3-vodičových zásuvkách, otestovať správnu funkciu GFCI a bezkontaktne zistiť napätie. Vyhľadávač ističov CBF200 váži iba 9,8 oz, je uvedený v zozname cETLus a dodáva sa s vysielačom, prijímačom a 9V batériou. Spoločnosť Triplett Test Equipment, založená v roku 1904, je popredným poskytovateľom testovacích a meracích nástrojov a nástrojov. Zákazníci Triplett profitujú z viac ako 100 rokov inovácií a odborných riešení na riešenie problémov v celom rade priemyselných odvetví. Nástroje Triplett pomáhajú profesionálom v oblasti elektrických zmlúv, hlasových/dátových/video (VDV) telekomunikácií, inštalácie a údržby CCTV/bezpečnostného videa, obnovy poškodenia vodou a ďalších. Triplett sídli v Manchestri, NH a je súčasťou Jewell Instruments.

Suma

Pridať do košíka Kúpte teraz

EAN: 0717449027580

Kategórie Zariadenia, príslušenstvo k veľkým spotrebičom, Náhradné diely a príslušenstvo pre chladničky, Ice Výrobníky,

Krajina pôvodu: Čína. Toto je originálny náhradný diel. Model výrobcu 5304458371. Položka Frigidaire.

Batteries Included?	‎No
Batteries Required?	‎No
Customer Reviews	4.0 4.0 out of 5 stars 123 ratings 4.0 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎5304458371
Item Package Quantity	‎1
Item Weight	‎1 pounds
Manufacturer	‎Frigidaire
Part Number	‎5304458371
Product Dimensions	‎1.5 x 2.5 x 3.5 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Wardell Scott

It works

None

Scritto da: Frank

Open box, good product

This was an open box item available at a reduced cost. Small crack in unit but does not affect unit working properly.

Scritto da: Bob H.

Just what I needed!

My ice maker stopped working so I called the number in the refrigerator to have a serviceman come out and repair it, which results in a recording listing off places in the general area that are certified to assist. I called all of them, but each time I was told that it would be several weeks and in some cases was told that they could not assist me at all. I eventually decided to replace it on my own. After doing some research to find the model that was compatible with my fridge, I found the model I needed available on Amazon with Prime shipping (bonus!). This overall replacement is super easy. As a piece of advice - you do not need to completely remove the screws that attach the mounting bracket to the inside of the freezer. Just loosen them up and the old ice maker will lift out. You can then easily slide the new one in in its place. Overall the removal and installation took about 15 minutes and I had ice shortly thereafter!

Scritto da: Shane7892

Good Replacement

Arrived fast. Easy to install, took 5 minutes.

Scritto da: Wibbo

Works well, but look to see if you need a leveling bracket before purchasing.

Great, but missing the leveling bracket the original ice maker had. The leveling bracket may be necessary -- it the ice maker is not installed level front to back the ice maker may not produce a full load or cube sizes may vary. If the ice maker is not installed level side to side, lopsided cubes may form. There is no other way to level the ice maker from side to side without the bracket, so be sure this will work for your application if your floor and refrigerator are not perfectly level. Otherwise a good replacement product. PS -- we've read elsewhere on appliance tech blogs that these sorts of ice makers last only about 3-4 years and that it's best to replace the entire unit rather than whatever component may have failed. It's good to know that I can replace the $100 ice maker in the $2000 fridge rather than have to replace the entire fridge.

Scritto da: ctpenny

This was a perfect replacement for my Kenmore model 253

***update*** After working great for just under 1year, the ice maker control board is now malfunctioning, requesting water too often and causing water to overflow. Seller only offers returns for 30 days. This was a perfect replacement for my Kenmore model 253.56602400 Fridge/Freezer. Wasn't too difficult to install and has been working GREAT for the past 6 months. Hopefully writing this review doesn't jinx that! This item was actually an entire kit that came with a hose, ice tray, and other parts that I didn't need. My only negative was the description didn't indicate that, but the main Ice Maker was there and has been working great.

Scritto da: Jennifer H.

Works great!

I got this to replace the one that came with my fridge and broke after 3 years. This was easy to install and works perfectly. Only gave 4 stars because when it arrived the front plastic cover was cracked. I'm not sure who's fault that is but I didn't care since I just used the old ones cover but if you are going to use this as a new one it might be worth noteing.

Scritto da: LuvDogz

...I was pretty sure I couldn't do this....

! I replaced it myself !! Proud I am ! The hard part was getting to the two 1/4 inch screws that hold the icemaker to the inside sidewall of my freezer....the non-working icemaker's "fingers" were partially extended, and blocked access to those screws....so.....once I finally got them backed-out some, the unit was easily removed....the new one went in with little difficulty since its "fingers" were laying flat, out of my way....oh....how-to videos gave me the push I needed to try this....????

Scritto da: André Montgrain

Five Stars

perfect thanks