E-Z Lok vložka s vonkajším závitom, uhlíková oceľ C12L14, spĺňa AISI 12L14, vnútorné závity M6-1.0, vonkajšie závity M10x1.5, dĺžka 10,49 mm, vyrobené v USA (balenie 5 ks)

Name: E-Z Lok vložka s vonkajším závitom, uhlíková oceľ C12L14, spĺňa AISI 12L14, vnútorné závity M6-1.0, vonkajšie závity M10x1.5, dĺžka 10,49 mm, vyrobené v USA (balenie 5 ks)
Brand: E-Z LOK
SKU: 0839137001020
Price: 36.75 EUR
Availability: InStock

Brand:E-Z LOK

4/5

€
36.75

Závitové vložky E-Z LOK do kovu poskytujú ľahko použiteľné riešenie na opravu alebo vystuženie závitových otvorov v kove. Závitové vložky E-Z LOK sú ideálne na použitie v kovoch, ako je hliník a liatina, sú skrutkované z pevnej ocele pre väčšiu pevnosť a vynikajúcu odolnosť proti vytiahnutiu. Štandardné vonkajšie závity umožňujú použitie štandardných vrtákov a závitníkov na inštaláciu. Akonáhle je otvor pripravený, E-Z LOK sa naskrutkujú do otvoru ako obyčajný spojovací prvok pomocou skrutkovača, skrutky a poistnej matice alebo voliteľného náradia E-Z LOK. E-Z LOKs sú samosvorné a nevycúvajú sa ani nevibrujú. Vopred nanesené lepidlo sa aktivuje pri inštalácii a priľne prakticky ku všetkým kovom. Lepidlo je pripravené za pár minút a tesní proti kvapalinám a plynom až do tlaku 6 000 psi. po úplnom vytvrdnutí (72 hodín).

Nie sú k dispozícii žiadne jednotky

EAN: 0839137001020

Kategórie Priemysel a veda, Hřebíky, Skrutky a spojovací materiál, Závitové vložky, Vložky s poistkou závitu,

Vyrobené v Amerike – silný dizajn s pevnou konštrukciou. Ideálne pre mäkké kovy, ako je hliník, liatina alebo horčík. Samozamýkateľné; Vopred nanesené lepidlo sa aktivuje pri inštalácii a je pripravené na upevnenie za 3-5 minút. Inštalácia pomocou štandardnej vŕtačky a závitníka; Nie sú potrebné žiadne špeciálne nástroje. Ľahko použiteľné riešenie na opravu poškodených závitov v kove.

Exterior Finish	Black Phosphate
Fastener Type	Thread Locking
Is Discontinued By Manufacturer	No
Item model number	450-6
Manufacturer	EZ-Lok
Material	Steel
Metal Type	Aluminum, Alloy Steel, Carbon Steel, Iron, Magnesium
Thread Size	M6 x 1

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: El mas ondeado

Triple check for treat,tap sizes

i use ez coil to reinforce walls on a aluminum block which had a broken screw ,fits perfectly

Scritto da: Anthony Frisco

saved my transmission!

I bought a used transmission from the junk yard that had a couple pan bolts stripped so I needed to repair them because transmission fluid was leaking out. I started of buying a cheap helicoil repair kit on ebay and tried using that first. if you are considering buying an ebay kit yourself do yourself a favor and DON'T! what started as a simple repair turned into a nightmare when the very tool that is supposed to fix threads destroyed them even more. boy was I in a pickle because now not only were the threads screwed up but now the hole was also bigger than it should. I was running out of options! luckily in my search for solutions I came a crossed these clever and yet simple inserts. These inserts are quality and don't need any of the expensive specialty tools that other common thread repairs do. I was able to fix the destroyed threads quickly and easily with just these inserts, a screwdriver, a common drill and bits, and regular tap set. they work great! no more stripped threads and no more transmission leak! what a relief! I definitely recommend them especially if you've already tried other thread repairs that didn't work and you think it might be beyond repair.

Scritto da: Lou

Good

Good product. Worked as expected

Scritto da: Steven L.

Much better than helicoil

After having a failed helicoil installation, these are much better and where I start with next time. No special tools needed, just the right drill bit size, which I got from HF.

Scritto da: Ryan

They worked perfectly for my application ????

This was the answer to my problem. Had a bolt break off in the crankcase on a quad. I wasn't able to get an easy out to work after drilling it and attempting unsuccessfully to back out the remaining threads. I started researching solutions and found these little beauties! I would highly recommend these.

Scritto da: F joe biden

drill size

these worked great. Had a stripped out bolt hole on the oil plate of a VW, drilled out installed this EZlock .All Good! a metric drill bit is probably your best bet , but if you only have sae bits ,an 11/32" works perfectly.

Scritto da: Tyler

Perfect fix!

These are the perfect fix for stripped out threads! Much better than a Helicoil and way cheaper than a Timesert. Worked great! You won't regret these.

Scritto da: Ernest E. Marks

perfect for aluminum thread repair

I repaired a helicoil repair gon bad on a 1981 Honda XL500R. It worked great. I believe this is the only way to go fo aluminum thread repair.