CURT 22320 Beznástrojový uťahovač svoriek proti chrasteniu pre 2-1/2-palcový prijímač, duté alebo plné stopky

Name: CURT 22320 Beznástrojový uťahovač svoriek proti chrasteniu pre 2-1/2-palcový prijímač, duté alebo plné stopky
Brand: CURT
SKU: 0612314050048
Price: 65.78 EUR
Availability: InStock

Brand:CURT

2/5

€
65.78

Táto štýlová a jedinečná rohožka je dokonalým zábavným doplnkom každej verandy, terasy alebo dverí. Použite túto podložku na zachytenie nečistôt, keď vaši hostia vstupujú do vášho domova, alebo ako dekoráciu, aby ste ukázali svoju lásku k mačkovitým šelmám. Táto rohožka odolá sezónnym zmenám a môže sa používať vonku po celý rok. Táto medená a čierna gumená rohožka na dvere prechodného štýlu je dokonalým spôsobom, ako ozdobiť podlahu a domácu výzdobu pri zachovaní úrovne praktickosti.

Suma

Pridať do košíka Kúpte teraz

EAN: 0612314050048

Kategórie Automobilový priemysel, Príslušenstvo pre exteriér, Towingové produkty a navijaky, Spojky na prívesy Príslušenstvo, Montáž prívesu,

NÁROČNÁ STAVBA. Táto súprava ťažného zariadenia proti hrkotaniu je vyrobená z ocele a hliníka a dodáva sa s čírym náterom pre trvalú odolnosť proti korózii. NASTAVITEĽNÝ. Aby sa zaistilo pevné uchytenie na spoji ťažného zariadenia, táto svorka ťažného zariadenia sa ľahko nastavuje. Jednoducho otočte závitovú maticu a páku. Chránené odolným, čírym povrchom pre odolnosť proti korózii. VŠESTRANNÝ STRIH. Toto zariadenie proti chrasteniu sa hodí prakticky na akúkoľvek 2-1/2-palcovú elektrónku prijímača. Môže byť použitý s príslušenstvom s dutou alebo plnou stopkou. JEDNODUCHÉ POUŽITIE. Tento ľahko použiteľný uťahovák ťažného zariadenia proti hrkotaniu nevyžaduje na inštaláciu žiadne nástroje. Jednoducho upnite U-skrutku na otvor drieku a rúrky prijímača a zaistite zaisťovaciu páku. TICHEJŠIE ŤAHOVANIE. Svorka závesu CURT proti hrkotaniu podporuje tiché ťahanie vášho prívesu upnutím na pripojenie závesu prijímača. Upozornenie: Svorka proti hrknutiu sa musí používať v spojení s riadne zaisteným ťažným čapom.

Brand	CURT
Brand	‎CURT
Country of Origin	‎China
Customer Reviews	3.0 3.0 out of 5 stars 89 ratings 3.0 out of 5 stars
Exterior	‎Painted
Finish Type	CLEAR ZINC
Item model number	‎22320
Item Weight	0.39 Kilograms
Item Weight	‎13.7 ounces
Manufacturer	‎CURT
Manufacturer Part Number	‎22320
Material	Aluminum, Alloy Steel
Model	‎2-1/2" Hitch Clamp
Product Dimensions	‎15 x 5 x 3 inches
Vehicle Service Type	Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: D. Lawson

Easy Peasy

Simple, effective and no tools required. Solidly built and eliminated rattle completely.

Scritto da: Craftsman

Great idea, just didn't work for me

I thought I had found the anti hitch rattle device I had been looking for. I wanted a tool less design, so I was willing to pay the price. When I tried it out I had to adjust it to get it in place and by then the cam was not enough to tighten it up and readjusting it was not working to easy while in place. I opted to return it. I figured if it was going to be a hassle them I would just get one requiring a wrench. It may work fine in some instances just not mine.

Scritto da: Adam

Don't waste time and money...

This device really tries... it does. But once the pin holes are oblong on your hitch this isn't going to stop it from sliding forward each time you stop and then back with a thud when you take off... Ask me how i know. My truck hitch shouldn't have worn out like this, but also I think this device should helped more to get me by until the new hitch comes in. EDIT: After the dealer installed a new hitch under warranty this device still doesn't do anything. Maybe if you have a light trailer that is empty all of the time but with any load at all the hitch will still slide in and out a little when you stop and take off. Just enough you can feel it... and i hoped that this would stop it and it failed...

Scritto da: Kindle Customer

Will not fit 2016 Ram 2500 factory hitch

This doesn’t fit my 2016 Ram factory hitch with factory bumper. There is not enough space on top between the hitch and bumper as well as the bottom of the hitch. The bottom you have to cut out the metal for the chain attachment points which I am not going to do. This was more money than I wanted to spend on it in the first place but with others being more expensive I chose this one. If it worked for my application I would keep it but the lever that tightens it down binds on the other piece making it hard to adjust and install, maybe grease or a bushing would be better than raw aluminum on raw aluminum. I am returning it since I have no use for it.

Scritto da: pTsDaD Workshop

Broke ina week. Cheap cast aluminum.

Trash.

Scritto da: Nick

No more rattle

Easy to install took all the vibration and shaking out of hitch when towing

Scritto da: Steven Jones

Excellent

Works perfect

Scritto da: Jacob Rogers

Broke after week and half

Didn’t fit well on my ram 1 ton, and it broke in half after a week and half. Trailer weighs around 7k pounds and is on the road everyday. Before it broke it did stop the rattling. There is just better products available at the same price point (ex. TriMax stabilizer).

Scritto da: Anthony

Good Idea needs improvement.

good idea long-term durability of this will not hold up. It need some more work to be a excellent product

Scritto da: Steve Léveillée

Pas très résistant

Utiliser pour une remorque de moins de 10 000lbs de poid et ça cassé