Bosch 1/2 palca X 6 palcov Vrták do muriva so šesťhrannou stopkou LBHX010

Name: Bosch 1/2 palca X 6 palcov Vrták do muriva so šesťhrannou stopkou LBHX010
Brand: BOSCH
SKU: 0000346630657
Price: 27.85 EUR
Availability: InStock

Brand:BOSCH

3.6/5

€
27.85

Vŕtacie vrtáky do muriva so šesťhrannou stopkou Bosch majú 4x životnosť v porovnaní so štandardnými vrtákmi do muriva a boli prepracované so šesťhrannými stopkami na použitie v príklepových vŕtačkách a príklepových skrutkovačoch. Tieto vrtáky majú asymetrické diamantom brúsené karbidové hroty, ktoré poskytujú rýchle vŕtanie a dlhšiu životnosť vrtákov v príklepových vŕtačkách a príklepových skrutkovačoch. Špičky sú navrhnuté pre presné štarty a menšiu chôdzu. Hlavy bitov sú vyrobené z exkluzívneho tvrdokovu vyrobeného spoločnosťou Bosch. Majú vyfrézované U-drážky s hlboko vyrezanými špirálami pre rýchle vŕtanie do tvárnic, muriva a betónu. Šesťhranná stopka poskytuje agresívnu uchopovaciu silu.

Nie sú k dispozícii žiadne jednotky

EAN: 0000346630657

Kategórie Elektrické a ručné náradie, Nástroje a príslušenstvo k elektrickému náradiu, Nástroje a príslušenstvo pre vŕtačky, Vrtačky do muriva Vrtáky, Vrtačky Vrtáky, Rotačné vrtáky s príklepom,

Frézované U-drážky s hlboko vyrezanou špirálou – poskytujú rýchly úber materiálu. Exkluzívny karbid vyrobený spoločnosťou Bosch – poskytuje vynikajúcu odolnosť pri veľkom zaťažení. Vylepšená šesťhranná stopka – umožňuje použitie v príklepových skrutkovačoch a príklepových vŕtacích skrutkovačoch pre väčšiu všestrannosť. Asymetrický diamantom brúsený karbidový hrot – umožňuje rýchle vŕtanie a dlhšiu životnosť bitov. Vrták do muriva s karbidovým hrotom s vylepšeným dizajnom šesťhrannej stopky – navrhnutý tak, aby poskytoval dlhú životnosť vrtáka a rýchle odstraňovanie materiálu.

Batteries Required?	‎No
Brand	BOSCH
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 198 ratings 4.6 out of 5 stars
Included Components	‎
Item model number	‎LBHX010
Item Package Quantity	‎1
Item Weight	‎0.01 ounces
Manufacturer	‎Bosch
Material	Diamond
Material	‎Diamond
Package Dimensions	‎7.87 x 1.77 x 0.43 inches
Part Number	‎LBHX010
Shank Type	Hex
Surface Recommendation	Alloy Steel
Tool Flute Type	Spiral

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Bob K

Worked great, no problems

I needed to drill a 1/2 in by 5 in hole in some concrete, for an anchor. I have a couple of regular drills, an impact driver, and a hammer drill. Because this has the 1/4 shank that looks like it fits an impact driver, I thought I'd give it a shot first.... It's not the fault of the drill bit that the impact driver didn't perform well, but the purpose of the 1/4 shank is lost if an impact driver isn't appropriate for the task. I knew that the "regular" drills would be a waste of time... which is why I bought the hammer drill. I was concerned about using the hammer drill with this bit. Other 1/2 bits that resemble this one, shred when they're put between the hammer drill and concrete. The other bits are only useable for a couple of inches before the stress causes them to fail. This bit performed very well.... and produced a very nice hole. Upon examination, it appears the "teeth" have suffered very little (if any) damage and will live in my tool box until the next time I need such a hole.

Scritto da: Thomas Marrone

Rapid cutting through cinder block.

Had several holes (10) to drill through residential cinderblock walls. This bit cut through all ten. It's a little scuffed but head looks ready for many more.

Scritto da: aolshove

Man, this thing went dull quick.

I recommend using this with water or something. When I used it with aggregate concrete, the rocks just stopped it cold. I barely got two holes out of this bit before I quit and decided that two holes is enough.

Scritto da: randolph v.

On time

Nice bit fit perfect

Scritto da: DaleDapkins-2timewinner of LorianHemingwayShortStoryCompFirstPrizein TennWilliamsShortStorycomp.

it works

it works

Scritto da: Amazon Customer

Made it through 2-1/2 holes

Drilling four holes to mount something in garage floor. Each one about 2” deep to put in drop in anchors. Stopped working half way into the third hole. Had to finish using older smaller bit to drill to depth and use this one to make them correct diameter. Used hammer drill that is 2500 rpm max and held trigger about half way to stay under rpm guidance.

Scritto da: G

Fantastic

High quality auger. Went through 12 inches of pressure treated lumber like a knife through butter. Would definitely purchase again.

Scritto da: Norberto Sanes

Barreña para concreto

Muy practica y útil.

Scritto da: pazoo

Decent bit with obvious limitations.

Bought to try drilling holes in concrete with my dewalt impact driver, I have a proper SDS but wanted to see how the impact would fare. When drilling cured concrete full of aggregate, it does work, just not all that fast. Going slow and using water helps a little, but has a hard time with rock. Would be much more suited to brick, tile, or other masonry. Limited by the 1/4" hex shank as anything with more torque would snap the shank, but a good option for softer materials or if you only need a couple holes in a tight space. A good backup option or something to keep in the toolbag.

Scritto da: Daniel

Cut through tile so easily

Drilling into floor tile, made the job a breeze!

Scritto da: Chris Wilkinson

Great masonry bit

Great bit did the job quickly and cleanly. Bosch makes great quality products.