Attwood 10107 Lock N’ Stow™, pre prívesný príves, vhodný pre motory Mercury 200 OpitMax, 255 OptiMax, 225 HP EFI, 250 HP EFI

Name: Attwood 10107 Lock N’ Stow™, pre prívesný príves, vhodný pre motory Mercury 200 OpitMax, 255 OptiMax, 225 HP EFI, 250 HP EFI
Brand: attwood
SKU: 6007795105099
Price: 142.28 EUR
Availability: InStock

Brand:attwood

3.8/5

€
142.28

Tento Attwood Lock N’ Stow™ bezpečne uzamkne prívesný motor v prednej polohe počas ťahania prívesu, čím sa výrazne zníži riziko poškodenia motora otrasmi na ceste. Toto inovatívne zariadenie nepripája spodnú jednotku motora k prívesu, ako to robia niektoré zariadenia, takže eliminuje stopy odierania a akýkoľvek možný nadmerný tlak na hydraulické tesnenia. Má oceľovú konštrukciu a čiernu práškovú povrchovú úpravu. Špendlíky sú z nehrdzavejúcej ocele. Tento kompaktný držiak sa dá ľahko uložiť takmer do každého priestoru lode. Tento zámok je vhodný pre motory Mercury 200 OpitMax, 255 OptiMax, 225-HP EFI a 250-HP EFI. Spoločnosť Attwood Corporation je už viac ako 150 rokov oceneným lídrom v oblasti inžinierstva, testovania a výroby tých najkvalitnejších morských produktov. Dodávame bezpečné a spoľahlivé osvetlenie, palivové systémy, vodné systémy, sedadlá a podstavce, plavecké rebríky, čalúnenie na mieru a všeobecné námorné príslušenstvo, ktoré sa ľahko inštaluje a spĺňa predpisy.

Suma

Pridať do košíka Kúpte teraz

EAN: 6007795105099

Kategórie Šport a outdoor, Šport a fitness, Jachting a plachtenie, Člny a vybavenie, Príslušenstvo pre údržbu, Náradie,

Pasuje na externé motory Mercury 225-HP EFI a 250-HP EFI. Vhodné pre prívesné motory Mercury 200 OpitMax a Mercury 255 OptiMax. Tiež zabraňuje nadmernému tlaku na hydraulické tesnenia. Inovatívne zariadenie nepripája spodnú jednotku motora k prívesu, takže odstraňuje stopy odrenín. Výrazne znižuje riziko poškodenia motora nárazmi z cesty. Bezpečne uzamkne prívesný motor v prednej polohe počas prívesu.

Brand	Attwood
Brand	‎Attwood
Brand Name	‎Attwood
Color	Unspecified
Color	‎Unspecified
Customer Reviews	4.7 4.7 out of 5 stars 250 ratings 4.7 out of 5 stars
Included Components	‎End Product & Information
Item Dimensions LxWxH	‎15 x 15 x 7 inches
Item Package Dimensions L x W x H	‎12.6 x 10.4 x 2.2 inches
Item Weight	907 Grams
Item Weight	‎907 Grams
Manufacturer	‎Attwood
Material	Other
Material	‎Other
Model Name	‎Attwood Boating Tools
Mounting Type	‎Engine
Number of Items	‎1
Package Weight	‎4 Pounds
Part Number	‎10107
Recommended Uses For Product	For Salt Water
Recommended Uses For Product	‎For Salt Water
Size	‎One Size
Sport Type	‎Boating
Suggested Users	‎Unisex-adult

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: francisco mendoza

Did not fit 225 EFI mercury

This is very well built , make sure to check the with on your motor bracket ,this wont fit 225 EFI mercury 4 stroke its too wide.

Scritto da: Pat

Just as advertised

This is so much easier to use than the straps for the boat motor. I can even do this for my husband as he is using the retractable straps for the trailer.

Scritto da: Amazon Customer

Excellent

All as stated by mfg an excellent product

Scritto da: Amazon Customer

This thing is the bomb!!

Keeps my Mercury Optimax Pro 200 perfectly still and solid while going down bumpy road. I was questioning if it would work and turned out completely pleased!! I’ll buy another one of this one wears out. My old go from the motor to trailer isn’t even half as good as this one.

Scritto da: sproctor

Product does great job of supporting engine

Have used the product for about 17 years, the rubber inserts don't last but a couple of years and I would just buy a new one because no one sells the rubber inserts. But the price has continued to go up where you can't afford to replace the entire unit every couple of years. I now have 4 spare units as I found that I could replace the rubber inserts with cut pieces of radiator hose purchased from local auto parts stores. Think I bought 4' of hose for less than 6 dollars. Product does great job of supporting engine.

Scritto da: Jimmy Ball

Throw away that old transome saver!

This is the way to go. Wish I had one years ago. Goes on or off in seconds and supports the motor better than the old long bar that straddles the roller.

Scritto da: mike

It works great. Only takes a few seconds to apply and ...

I have a Merc Pro Xl 250 on a Ranger Z521 and the transom support brace broke in half on my way to the lake and I had to replace it. After shopping for a replacement I came across this Atwood transom brace and decided to give it a try. It works great. Only takes a few seconds to apply and fits in a storage compartment instead of dragging the old style to the back of my truck.

Scritto da: Scott

Attwood, Please oh Please fix the problem with the plastic inserts. Otherwise awsome product.

I love this and this is the second one I purchased. The only problem with this product is the plastic inserts on the end are not of very high quality. I was really hoping that was addressed and would have improved. Attwood get that part fixed and you have a great product. No more bending over to get underneath the trailer to attach the travel lock.

Scritto da: Colleen Ford

Transom saver

This transom save works great and keeps the 225 merc in place very well

Scritto da: Amazon Customer

Four Stars

Great product

Scritto da: Amazon Customer

Not Nearly String Enough!!!

Terribly disappointed. This is rated for a Merc 200hp and after less than 1 month the product bent and I was unable to retratct the stainless pins. I was forced to straighten the bar, enabling me to retract the pins. Only then was I able to remove the product from my engine. Not a bad design but not nearly strong enough.