Yost Vises 445 Kombinovaný zverák

Name: Yost Vises 445 Kombinovaný zverák
Brand: Yost Vises
SKU: 797734008326
Price: 175.68 EUR
Availability: InStock

Brand:Yost Vises

3.8/5

€
175.68

Tento úžitkový zverák na rúrku a stolný zverák má základňu otočnú o 360 stupňov a pripevňuje sa na pracovný stôl. Základňa otočná o 360 stupňov má 2 aretácie. Ručným dotiahnutím uzamykacieho gombíka na základni zaistíte jeho polohu. Yost Vises vyrába vysokokvalitné zveráky a príslušenstvo k zverákom od roku 1908. Naše produkty dodávame veľkým distribútorom aj individuálnym remeselníkom po celom svete, od priemyselných zverákov, zverákov profesionálnej kvality, dielenských zverákov, ľahkých až po ťažké. pracovné zveráky, multifunkčné zveráky, zveráky na zváranie atď. Naše výrobky spĺňajú alebo prekračujú priemyselný štandard federálnej špecifikácie GGG-V-410A a poskytujú spotrebiteľom kvalitné produkty, ktoré vydržia roky za skvelú cenu.

Suma

Pridať do košíka Kúpte teraz

EAN: 797734008326

Kategórie Priemysel a veda, Nástroje a domáce potreby, Elektrické a ručné náradie, Ručné náradie, Pracovné náradie, Vízy, Stolné zveráky,

ZÁRUKA: Dodáva sa s 1-ročnou obmedzenou zárukou a 90-dňovým vrátením. BEZPEČNOSTNÉ INFORMÁCIE: Nesprávne používanie zverákov môže spôsobiť vážne poranenie očí, rúk alebo iných častí tela. Zveráky musia byť správne nastavené a používané. Pred nastavením a použitím si prečítajte, pochopte a dodržiavajte všetky pokyny uvedené v príručke. KVALITA ZVERÁKOV YOST: Každý nástroj Yost Vises je navrhnutý tak, aby spĺňal vysoké štandardy kvality, pevnosti a odolnosti. Ceníme si kvalitu pred kvantitou a vyrábame produkty, ktoré sú bezpečné a ľahko sa používajú. Ponúkame doživotnú technickú podporu na podporu našej záruky kvality. AKO POUŽÍVAŤ: Uistite sa, že je zverák bezpečne pripevnený k pracovnému stolu a či je zaistený zámok otočnej základne. Otvorte zverák otočením rukoväte zveráka proti smeru hodinových ručičiek. Umiestnite predmet medzi zúbkované čeľuste. Zatvorte zverák otáčaním rukoväte zveráka v smere hodinových ručičiek, kým predmet nezapadne do zúbkovaných čeľustí, a pokračujte v uťahovaní, až kým nebudete môcť predmet pohnúť. Neuťahujte príliš, pretože to môže poškodiť predmet a/alebo zverák. Po dokončení práce na predmete otočte rukoväťou skrutky proti smeru hodinových ručičiek, aby ste predmet uvoľnili. OTOČNÁ ZÁKLADŇA: otočná základňa otočná o 360 stupňov s 2 aretáciami. TECHNICKÉ ŠPECIFIKÁCIE: Šírka čeľuste 4,5 (11,43 cm), Otvor čeľuste 4 (10,16 cm), Hĺbka hrdla 2,625 (6,6675 cm), Min. kapacita potrubia ,125 (0,3175 cm), Max kapacita potrubia 2 (5,08 cm). KOMBINOVANÝ ZVERÁK: 4,5-palcový úžitkový zverák Yost Vises 445 na rúrku a stolný zverák je vyrobený z 30 000 PSI liatiny zo šedej liatiny s oceľovou U kanálovou tyčou. Vybavený veľkou pracovnou plochou kovadliny. Tiež má ako vymeniteľné zúbkované horné čeľuste z kalenej ocele a veľkú stálu zúbkovanú rúrkovú čeľusť s veľkou kapacitou potrubia.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Yost Vises
Color	Blue
Color	‎Blue
Country of Origin	‎USA
Customer Reviews	4.7 4.7 out of 5 stars 1,082 ratings 4.7 out of 5 stars
Included Components	‎
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	6 x 8 inches
Item model number	‎445
Item Package Quantity	‎1
Item Weight	17 Pounds
Item Weight	‎17 pounds
Manufacturer	‎Yost Tools
Material	Cast Iron with Steel U Channel Bar
Material	‎Cast Iron with Steel U Channel Bar
Measurement System	‎Inch
Part Number	‎445
Power Source	‎Hand Powered
Size	‎4.5 inches
Style	Modern
Style	‎Modern

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Wayne Derber

An Important Vise Mounting Tip

It is often desired to mount a vise close to the edge of a workbench so that items may sometimes be secured vertically in the vise and extending below the top of the workbench. I thought doing so would require the vise to be mounted too close to the edge of my wood workbench (possibly causing the edge of the wood to eventually split off). An easy solution is to mount the vise ¾” further inward from the edge of the bench. Then when desiring to clamp a piece vertically in the vise, simply use a ¾” wood (scrap) spacer block on the inward jaw of the vise. The only small disadvantage of this method is that the jaw opening is decreased by ¾” when clamping an item vertically. But the big advantage is that my vise is mounted securely onto my wood workbench. So far, I have been well pleased with this Yost 445 vise.

Scritto da: Andrew Cunningham

Not perfect but not terrible

Positives, the vise has good weight to it. The size was perfect. The paint on it seems to be nice and thick. Smooth opening and closing. Negatives, the jaws don't perfectly line up when you close them. You have to kind nudge the moving jaw with hand to make them line up correctly. It's not easy to rotate. You have to loosen the two locking screws almost to the point of them completely disassembling and you still have to lift the vise to spin it on the base.

Scritto da: Shawn P Lillard

Great Vise With One Weird Issue

I bought this vise on the recommendation of a YouTuber. It's the perfect size for my 30" X 60" workbench. It's super sturdy and Yost has an excellent reputation. The one thing I have experienced is: if I clamp something in it and the item is not perfectly centered over the beam, The vise will jam when I loosen the jaw. It takes me having to give the outboard jaw a firm but not crazy hard bump on the side with the palm of my hand to release it. I have gotten used to it and I don't know if this is something common to this model but it's what happens to mine. Otherwise, I'm happy with it.

Scritto da: JXPitt

Great Product for the Money

Well finished and easy to install; I merely drilled four holes through the wood top and secured it with 2 1/2" bolts, washers and lock-nuts. Very well sized for my home workbench.

Scritto da: Scoby

well made

so far so good. Very well made

Scritto da: Andre Theoret

Very good value

Very happy. Good value.

Scritto da: joe

Decent

Replaced a 60 yr old Wilton vise. This yost is a decent vise for the money. I doubt it will last sixty yrs but I know I will not either. Does the job satisfied for the price.

Scritto da: Kindle Customer

great for small work bench

This vice is a perfect size for your average tinkerer. Not industrial duty, but strong enough to hold a 2x4 or 1 inch pipe to do a repair project. With soft jaws even your weapons

Scritto da: rgt

Seems OK

Used it for punching holes in a leather belt. My punch made indents in the flat area to be used for this purpose. Found that a bit surprising since supposed to be hardened steel. But over all, it works . I like the fact that can rotate it to accommodate the particular task that need a vise for.

Scritto da: I S.

ok depending on your application

Its ok depending on your application. Overall I didn't really like this vise. Too much play in the jaws. The horizontal bar through-piece is rolled steel, not cast, not precise enough to give precise alignment and reduce slack. All cast would be much better. Also, the screw is roughly machined resulting in rough turning movement. On the plus side, has separate jaws for holding pipe (two sizes) which is why I ordered it in the first place.

Scritto da: AaronE

Great vise

Make sure to mount this properly (I used metal washers above and below to distribute pressure and small rubber washers between the vice and my bench top for maximum stability), and it’ll work beautifully. Swivel works great (360 degrees) and it does its job. Super solid and good value.

Scritto da: Devo

Low Quality

Very cheaply made. Price reflects its quality. Poor action when operating, spring grind and loose fitting jaws. Will use as secondary tool for light jobs. However, Shipping and deliver was excellent. LOL.

Scritto da: Kindle Customer

Good from the price point

For light jobs ok...not for heavy duty stuffs. I you need to hammer and knock hard this is not a vise for you. Other than that sawing etc it's suitable. The vise it's a bit light in weight and does not give one a solid feeling when using.