Vyrovnávacie koliesko Foot Master GDR-60-F-NYN, 50 mm koliesko Nylon 66, ikonická slonovinová kosť, výškovo nastaviteľná račňa, otočné koliesko na tanieri, nosnosť 250 kg

Brand:FOOTMASTER

3.3/5

87.09

Inžinieri FOOT MASTER vynašli ORIGINÁLNE nivelačné koliesko v roku 1989, čím stanovili štandard pre výkon a odolnosť. Tento dômyselný produkt kombinuje mobilitu kolieska, výškovú nastaviteľnosť držiaka na výšku a stabilitu podložky na nohy. Profil vyrovnávacieho kolieska série GDR je neoddeliteľnou súčasťou jeho funkcie. Na dosiahnutie kombinácie pevnosti a kompaktnosti sa používa hrubý hliníkový rám. GDR-60-F-NYN je dimenzovaný na 250 kg s celkovou výškou 82 mm. Pre presné nastavenie výšky je k dispozícii možnosť nastavenia výšky až o 10 mm. GDR-60-F-NYN sa montuje s hornou doskou s rozmermi 73 mm x 73 mm (58 mm x 58 mm vzor otvorov pre skrutky) pomocou 4 skrutiek a matíc (ZAHRNUTÉ). Otočná časť obsahuje 2 sady guličkových ložísk pre ľahkú manévrovateľnosť. Objímky obežnej dráhy ložísk vyrobené z tvrdenej ocele zabraňujú odieraniu hliníkového rámu, čo vedie k vysokému výkonu a spoľahlivej spoľahlivosti. Pohyb je jednoduchý vďaka kolesu s priemerom 50 mm spojenému s hriadeľom nápravy z ocele kovanej za studena. Akonáhle je koliesko umiestnené, poskytuje zadný prístup k výsuvnej rukoväti s rohatkou, ktorá sa používa na zníženie podložky na nohy. Keď sa koleso zdvihne zo zeme, podložka na nohy prevezme úlohu, aby sa aplikácia úplne zastavila. Uskutočnenie úprav na dosiahnutie perfektnej úrovne je rýchle a efektívne pomocou integrovaného račňového systému. Keď je čas opäť sa pohnúť, jednoducho zdvihnite podložku, aby ste obnovili slobodu pohybu.

Koleso Nylon 66 (D70) má vynikajúcu rozmerovú stabilitu a pevnosť v ťahu. Integrovaná zaťahovacia račňa na rýchle a pohodlné nastavenie výšky. Puzdrá obežnej dráhy ložísk vyrobené z kalenej ocele zabraňujú odieraniu. Dve sady guľôčkových ložísk v otočnej časti pre ľahkú manévrovateľnosť. Patentovaný rám z liateho hliníka dosahuje veľkorysú nosnosť.
Brand FOOTMASTER
Color Iconic Ivory
Country of Origin Korea, Republic of
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Item model number GDR-60-F-NYN
Manufacturer G-DOK Industries
Material Nylon, Aluminum, Steel
Mounting Type Surface
Product Dimensions 4 x 3.75 x 3.23 inches; 1.72 Pounds
Unit Count 1.0 Count

3.3

8 Review
5 Star
59
4 Star
13
3 Star
27
2 Star
0
1 Star
0

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Amazon Customer
Ya only get one caster
This is one hell of a caster. With that said, these are made in Korea and the Chinese knock offs are almost as good and you get four for less than the price of one of these. I sent it back and went with the made in China ones. Not unhappy...
Scritto da: Murray Irwin
Brilliant casters
Sturdy, easy to adjust height, and blocks very firm on the floor, but rolls easily when needed. Downside is price - you are getting quality and you are paying for it too.
Scritto da: A. Martin
Well worth the money!
I initally thought these were expensive for what they were, but upon receiving them, I can now see why. The frame of this caster is a well-designed solid casting. The wheels are small, but they have no problem rolling around with these being mounted to the legs of our pool table. Our home is small, and we wanted to be able to move the pool table when needed to make room for other activities in the room. Our table is a slate table with solid wood frame. When the casters are set to roller mode, the table is moved with ease, even with just one person. So far, the wheels have not gotten flat spots or froze up on the axles. The ratcheting mechanism is easy to operate and only takes a few turns to lift the pool table onto the rubber feet and back. I wish I had known about these things sooner! Would highly recommend these to anyone wanting to mobilize heavy objects!
Scritto da: Kjell Are Refsvik
Wow....
I did not know a product like this excisted, but it does, and it works fully as advertised. I used it to create a feet underneath a 19" rack made of oak for my home office, and it has been wonderful to both be able to move it around when needed, as well as level it perfectly when it found its place. Top marks for these, even if they were a bit expensive.
Scritto da: SLRW
Great Product
These are the best casters for heavyweight applications. I installed six casters on a 6' x 12' center island workshop cabinet table . Weighing in at over one-thousand pounds when fully loaded with tools and woodworking supplies, the island still rolls easily on the concrete shop floor. Once the pads are lowered to floor, the ratcheting action allows me to level and stabilize the entire island for use as a run-out table for all the shop tools. Great product. I'm now purchasing more to install on my heavyweight shop tools (planer, joiner, table saw, etc.) to maximize tool mobility and increase shop functionality. I highly recommend this product to others who have a frequent need to move heavy loads that must remain stationary once relocated. Not cheap, but well worth the $$
Scritto da: chris
Well made for the price.
I hardly ever go out of my way to review a product, however, this one deserves it. I installed these for an 800 pound slate pool table that I wanted to move around easily, work great! Levels so that I lean on the table from time to time without movement when sitting on rubber bumpers. Wheels move very easily, came with no screws. The levers have a ring that have bent rather easy but doesn't effect the performance of the casters. Well made.
Scritto da: cheri b.
Built like the Great Wall of China: to last!
You can feel the weighty quality of these as soon as you pick them up. I returned a lesser set and got these instead. Not cheap but a sturdy, well-engineered component worth price if you need something that can handle serious workloads (I use mine on the base of a honey extractor that sees a lot of weight and vibration)..
Scritto da: I. Cortes
Makes moving a 300lb bench like buttah! The ratchet mechanism is very cool
I thought this might not serve my needs but was totally wrong. I made a large workbench and was going to use traditional casters but since I needed a stable platform to route, sand and finish wood projects. I needed the stability of a rubber pad yet the mobility in a limited space. Makes moving a 300lb bench like buttah! The ratchet mechanism is very cool! I think if I ever have large heavy benches that need to be moved frequently these are a no brainer.

Súvisiace produkty

hot
Hobart 00-087669-00001 Caster
0.1/5

€ 126.85

Hobart 00-087669-00001 Caster
0.1/5

€ 126.85

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array