Teleskopický kultivátor MGA503A1 — Predlžovacia rukoväť pre ručne ovládané vlečné motory — 24-palcový — Čierna

Name: Teleskopický kultivátor MGA503A1 — Predlžovacia rukoväť pre ručne ovládané vlečné motory — 24-palcový — Čierna
Brand: MotorGuide
SKU: 0089287102782
Price: 63.67 EUR
Availability: InStock

Brand:MotorGuide

3/5

€
63.67

Táto teleskopická rukoväť s predlžovacím motorom na ťažnú páku/trolling zvyšuje komfort obsluhy a je vyrobená z hliníkových rúrok a má mäkkú rukoväť. Na použitie s väčšinou elektrických motorov kormidiel a prívesných motorov s kormidlovou pákou 9 hp alebo menej s ťahom pod 120 libier. Predlžovacie rukoväte, ktoré umožňujú operátorovi sedieť ďalej vpredu, tiež zlepšujú schopnosť plavidla hobľovať. MotorGuide sa už viac ako 50 rokov venuje konštrukcii a výrobe inovatívnych trollingových motorov a príslušenstva. S hrdosťou stanovujeme štandard pre najodolnejšie a najľahšie použiteľné motory na trhu a vlastníme najpresnejší systém PinPoint™ GPS, ktorý poskytuje rybárom vynikajúce ovládanie lode.

Suma

Pridať do košíka Kúpte teraz

EAN: 0089287102782

Kategórie Šport a outdoor, Šport a fitness, Jachting a plachtenie, Člny a vybavenie, Lodné motory, Vlečné motory,

Mäkká rukoväť. Jednoduchá inštalácia. Poskytuje rozšírené ovládanie plynu a riadenia pri trollovaní. Hodí sa pre väčšinu rukovätí motorov na trolling a prívesných motorov s výkonom 9 hp alebo menej (s ťahom až 120 libier). 24 palcové nastaviteľné predĺženie.

Brand	MotorGuide
Brand	‎MotorGuide
Brand Name	‎MotorGuide
Color	Black
Color	‎Black
Customer Reviews	4.0 4.0 out of 5 stars 440 ratings 4.0 out of 5 stars
Fuel Type	‎electric
Included Components	‎Extension Handle & Information
Item Dimensions LxWxH	‎20.25 x 4.87 x 2.25 inches
Item Package Dimensions L x W x H	‎18.19 x 4.84 x 2.99 inches
Item Weight	0.69 Pounds
Item Weight	‎0.69 Pounds
Manufacturer	‎MotorGuide
Material	other
Material	‎other
Model Name	‎Motorguide Electric Trolling Motors
Mounting Type	‎Bow
Number of Items	‎1
Operation Mode	Electric
Operation Mode	‎Electric
Package Weight	‎0.34 Kilograms
Part Number	‎MGA503A1
Recommended Uses For Product	‎For Salt Water
Size	‎One Size
Sport Type	‎Fishing
Suggested Users	‎unisex-adult

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Danielon

Cumple su función

Relación precio calidad es bueno.

Scritto da: Daniel Golding

First thoughts.

Tiller / motor guide just arrived. For the price I’m not upset at all. Product is as described. The telescope works easily and I haven’t had any issues with the handle coming off yet but I plan to add some grip tape to the handle anyways.

Scritto da: sailorman

Handle adjustment joint slips when twisting

Too flimsy for my 2.5 hp outboard. Clamp on outboard handle stays in place, but the joint to tighten extended handle to itself doesn't hold. If you have an outboard, buy a metal extension handle.

Scritto da: Benjamin D.

Great product, easy to install and use.

The product was straight forward, simple and easy to use. Unfortunately the handle grip became loose on first use and it turned out to be a case of nearly no adhesive on holding in to the main part of the handle. This became problematic when trying to decrease speed. I had to apply a good second g of adhesive myself to fix it.

Scritto da: EvanSei

Works with modification

Used this on my 9.9 outboard. Fit over the handle just fine after removing the rubber grommet. Seems to tighten down well and leaves access to the kill button. Plenty long enough as well. The bad: The rubber handle at the end is held on with cheap adhesive. It pulled off the first time I tested it. Ended up using good adhesive and now it's fine. To extend the handle, you give it a quarter turn to loosen, then slide to length, and quarter turn again to secure. Problem is, running to motor you turn for throttle which then loosens the shaft on this thing allowing the handle to extend/retract again. Drilled a hole and put in a through bolt at my desired length. Problem fixed. It's cheap junk. But ya get what you pay for.

Scritto da: Nancy Swanstrom-Moore

Perfect for extending the motor handle

We did have to wrap our handle to thicken it so the extension piece would fit - now it is perfect.

Scritto da: zaki algasem

Fits and works well

It fits good. It works smoothly.

Scritto da: Michael Jordan

Hot garbage

Rubber handel came off right away. Glue didn't hold at all and came right off the damn handel. When letting up on the throttle it just loosens the hold from retracting and retracts. Definitely not the only one this had happened to.

Scritto da: Ken

Check the rubber grip before using. Mine was not attached to the handle... I had to add more glue.

Otherwise, it's a great product and does what it says.

Scritto da: Amazon Customer

Works great after I fixed it

Right out of the box the grip came off. I applied strong glue and let it cure. It’s fixed but come on shouldn’t happen. I use it on a Yamaha 9.9 4 stroke and it fits well. I had to take out the rubber sleeve that is inside but that’s ok. So far I haven’t had any issues when the handle is extended with it coming loose. We’ll see how it holds up.

Scritto da: Nicole

Exactly what he was looking for, good quality

He now has a small boat, this will help run the motor.

Scritto da: Amazon Customer

You get what you pay for.

Very flimsy. It would barely tighten down on the throttle handle. I was out at the lake when I installed it and I ended up having to put a hose clamp on it to make it work.

Scritto da: Barry White

Would need to modify like putting a few screws in it to work right.

Without modifying the handle like putting a few screws in it, it does not tighten enough when the length is adjusted, to not slip when trying to power up the outboard. Also the foam handle at the end slips/turns if you don't squeeze it enough to not slip/turn.