TEKTON 3/8 palcový pohon x 7/8 palcový 6-bodová zásuvka kyslíkového senzora

Name: TEKTON 3/8 palcový pohon x 7/8 palcový 6-bodová zásuvka kyslíkového senzora
Brand: TEKTON
SKU: 0020209049297
Price: 36.38 EUR
Availability: InStock

Brand:TEKTON

3.7/5

€
36.38

POPIS PRODUKTU Použitie Zásuvka kyslíkového senzora TEKTON 4929 bola vytvorená na použitie s račňami a ističmi a uľahčuje demontáž a inštaláciu kyslíkových senzorov na vozidlách s počítačom riadenými motormi. a znova čas. Čierna fosfátová povrchová úprava odolná voči korózii tiež dodáva zásuvke dlhú životnosť. Dizajn, navrhnutý s ohľadom na mechaniku, táto zásuvka funguje rýchlo a efektívne v tesnom priestore okolo kyslíkových senzorov. 6-bodový skosený nosový dizajn bezpečne uchytí upevňovacie prvky kyslíkového senzora, čím zabraňuje poškodeniu senzora. Bočný výrez vám umožňuje jednoducho nasunúť objímku na snímač, čím sa zabráni poškodeniu vodičov. Značky Aj pri slabom osvetlení sú vysokokontrastné, trvalé laserom vyleptané označenia veľkosti ľahko čitateľné. Veľkosť je tiež vyrytá do chróm-vanádiovej ocele na vonkajšej stene zásuvky. Nebojte sa. Takže pokračujte, Take It On. Špecifikácie: * Veľkosť pohonu: 3/8 palca * Materiál: Chrómvanád * Body zásuviek: 6 s bočným výrezom OD VÝROBCU Jednoducho nainštalujte a odstráňte kyslíkové senzory a zaistite efektívny chod motora vášho auta opäť so zásuvkou pre kyslíkový senzor TEKTON 4929.

Suma

Pridať do košíka Kúpte teraz

EAN: 0020209049297

Kategórie Nástroje a domáce potreby, Elektrické a ručné náradie, Ručné náradie, Nástrčné hlavice a nástrčné súpravy, Individuálne nástrčné hlavice, Trojitý štvorcový pohon,

Vyrobené zo zápustkovo kovanej, tepelne spracovanej, chróm-vanádiovej ocele. Použite s akoukoľvek 3/8 palcovou hnacou račňou alebo lámacou tyčou. Bočný výrez zabraňuje poškodeniu vodičov. Bežná 6-bodová zásuvka 7/8 palca (22 mm) je vhodná pre väčšinu kyslíkových senzorov. Odstraňuje a inštaluje kyslíkové senzory na vozidlách s počítačom riadenými motormi.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	TEKTON
Brand	‎TEKTON
Color	‎Original Version
Compatible Fastener Range	‎0.375 inches
Country of Origin	‎Taiwan
Customer Reviews	4.7 4.7 out of 5 stars 4,575 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Drive System	Nutsetter
Drive System	‎Nutsetter
Finish	‎Chrome Vanadium
Finish Type	‎Chrome Vanadium
Included Components	‎
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	5.75 x 1.75 x 2 inches
Item Dimensions LxWxH	‎5.75 x 1.75 x 2 inches
Item Length	‎5.75 inches
Item model number	‎4929
Item Package Quantity	‎1
Item Weight	‎0.48 ounces
Manufacturer	‎TEKTON
Material	Chrome Vanadium Steel
Material	‎Chrome Vanadium Steel
Measurement System	‎Imperial
Number Of Pieces	‎1
Part Number	‎4929
Product Dimensions	‎5.75 x 1.75 x 2 inches
Size	Oxygen Sensor Socket
Size	‎Oxygen Sensor Socket
Warranty Description	‎Always Guaranteed: support@tekton.com

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Lewis Meyer

works great

Strong metal works good

Scritto da: Jose

Metal is Tough made

Thick wall small slit jest how thay should be made

Scritto da: ????

GOOD tool

Groove could stand to be a little wider for ease of use. Did function but severed my insulation due to tight fit through Groove.

Scritto da: CHUONG NGUYEN

Good.

Working good !!! .

Scritto da: Coffeh

Perfect fit

Worked out great, got my O2 sensor off no problem!!

Scritto da: Amazon Customer

Tekton O2 socket

Great product Great brand

Scritto da: Alejandro

Worked perfectly with my Chevrolet Equinox LT 2013!

The socket worked perfectly! great quality!

Scritto da: WL

Fits Honda Civic Upstream Sensor. Diameter is 1.25".

This tool worked for removing and installing the upstream oxygen (air / fuel) sensor on my 8th generation (2006-2011) Honda Civic. The sensor (Denso 234-9124) has a heatshield that limits which sensor tools fit. Initially, I tried a Powerbuilt offset socket that I already had on hand, but the tool diameter was too big to fit all the way into the heat shield so it wouldn’t reach the sensor’s hex “bolt”. With no manufacturers specifying an outer diameter (O.D.) dimension for any of the different O2 sensor tools, I crossed my fingers and purchased this Tekton socket. I’m happy to say it fit. To help others in the future, the O.D. of this socket is 1.25”. For reference, the Powerbuilt offset socket was 1.32”. (I uploaded a pic comparing both.) That 0.07” made the difference between what fit and what didn’t. Though I wish I had the diameter information up front, I’m happy that this purchase worked out and I hope you found this info helpful.

Scritto da: Joe Install

Very solid O2 sensor socket

Made very short work or removing A/F sensor from my 2001 Rav4. Sensor was tight but with a little torque applied via cheater bar, came off easily. Socket did not appear to flex. Costs bit more than some of the other sockets on amazon but seems to be constructed more robust

Scritto da: Jordan

TEKTON 4929 3/8-Inch Drive by 7/8-Inch Oxygen Sensor Socket

It removed my old oxygen sensor. And it installed my new oxygen sensor. That's all I wanted and it did it without bragging. Modest little unit. Get it and save yourself a mechanic bill of arm/leg

Scritto da: Juan Quintana

OJO solo para el sensor de oxigeno frontal

todo correcto para el sensor frontal, en mi caso ocupaba para el sensor trasero (salida escape) y este último es mas largo por lo cual este aditamento no me fue funcional, igual el sensor ya no servía y le di un recorte para poder usarlo

Scritto da: Kyle

Excellent product!

This is a must have in any car enthusiasts tool kit. My O2 sensor was basically welding into my cat and would not come out, I even crushed the edges of the hex nut on the sensor trying to get it off. Bought this and slapped it on an impact gun and it pulled that sucker off right away! Only word of caution, the O2 sensor wires will wrap around the socket if you try to back the whole thing off in one go, this is meant only to break it loose so you can do the rest by hand. All in all, perfect product for a specific application, impact ready and solid construction. Strongly recommend!

Scritto da: Cassha

Not cheap material at all. Very durable and good price.

Worked well to remove the bank 2 sensor 1 air/Fuel sensor. However, I had trouble using it to remove bank 2 sensor 2 oxygen sensor due to there not being enough room to fit a ratchet or breaker bar. I don't think this is the socket's fault, of course. I just wanted to let anyone buying know this is a possibility.