Ťažko dostupný spojovací prvok 014973222390 222390 Prítlačná matica, 5/16

Name: Ťažko dostupný spojovací prvok 014973222390 222390 Prítlačná matica, 5/16
Brand: Hard-to-Find Fastener
SKU: 0014973222390
Price: 33.71 EUR
Availability: InStock

Brand:Hard-to-Find Fastener

3.6/5

€
33.71

Máme na sklade širokú škálu spojovacích materiálov, ktoré sú ideálne pre mnoho aplikácií v domácnosti, na farme, v obchode, v automobilovom priemysle a v priemysle. Väčšina našich spojovacích prvkov má ľahké pozinkovanie cez oceľ, čo poskytuje povrch odolnejší voči hrdzi. Predávame tiež potiahnuté a nerezové výrobky pre dodatočnú odolnosť proti hrdzi. Máme na sklade mnoho druhov spojovacích materiálov od nízkouhlíkovej ocele až po kalenú, tepelne upravenú oceľ. Nie všetky spojovacie prvky sú použiteľné pre všetky aplikácie, takže sa uistite, že dôkladne otestujete a získajte názor licencovaného stavebného alebo certifikovaného stavebného alebo stavebného inžiniera predtým, ako sa spoľahnete na tieto spojovacie prvky v situáciách, kedy by zlyhanie malo za následok poškodenie majetku alebo osoby.

Nie sú k dispozícii žiadne jednotky

EAN: 0014973222390

Kategórie Priemysel a veda, Hřebíky, Skrutky a spojovací materiál, Nutky, Tlačné matice,

Typ: Tlačná matica. Štýl: Podložka Cap. Povrchová úprava: zinok. Materiál: Oceľ. Priemer: 5/16.

Batteries Included?	‎No
Batteries Required?	‎No
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 183 ratings 4.6 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Zinc
Included Components	‎Puch Nut, 16-Piece
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Item model number	‎014973222390
Item Package Quantity	‎1
Item Weight	‎0.32 ounces
Manufacturer	‎Hard-to-Find Fastener
Material	‎Steel
Measurement System	‎Inch
Part Number	‎PSHNL-134-16
Size	‎5/16"

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Tim

Worked for me

Redid all the rollers on my boat, and these worked great for me. I know some people struggle to use these, but the key is using a big C clamp to press them on. You can do it like a caveman with a hammer, or just slowly press it on real easy. They’ve been on now for a month or so, and I tried prying the first set off and realized it was going to take a lot of force. It’ll probably be a permanent fixture until I need to replace rollers again.

Scritto da: Medical Unprofessional

Size listed is the width of the hole in the cap, not the entire cap width.

Wasn’t sure, took a chance after measuring, and it was perfect fit. They appear to be galvanized, and already much sturdier than the original shiny one that had broken.

Scritto da: GODSCowboy

Exactly what i needed

My dolly lost the 1/2 cap and you can't find them locally. I had to buy a package of 10 but it's worth it to me to fix my dolly. I can get a lot of work done a lot easier now and if I lose another one I have replacements.

Scritto da: Bill b.

Perfect for 7/16 rod handles on my smoker.

Strong wind knocked over my heavy smoker, the handles had heat shielding handles that were held on by these caps but Came off when it fell over I could not find them in the tall grass. IM glad I measured the rods before ordering. These are an odd size but were exactly what I needed. You can find everything on Amazon.

Scritto da: FixaLot

painoftheaxle remedy

I needed these washer caps as replacements to fix a childs tricycle wheels originally not put together properly. Generally used as axle caps to hold on wheels of small pedal/push toys or wheeled BBQ grills etc. In this case for 3/8 inch common steel axles. Measure carefully to make sure that you get the correct size for the job as they come in many common sizes. They are pressed or hammer tapped evenly to seat properly. Once in place they hold extremely well and are very difficult to remove without destroying. So be sure you are ready to put them on. They are of great quality and will hold and last probably for the usefull life of the unit used on. Nice to have on hand for do it yourself'er. Very pleased to find them here.

Scritto da: Matthew K.

Great axel nuts. Hold better than others

Ordered to repair axel on trash bin. Worked beautifully and holding up. These have tab that acts as a lock washer. A little harder to install, but far more secure. Recommended.

Scritto da: Amazon Customer

Yes, This Will Fix That Wheel

The wheel fell off my rolling trash bin and, rather than toss the whole thing, I researched until I found this doohicky as the solution. Yes, it's expensive to buy so many when I only needed one but it was well worth it. I bought a new 5/16 rod at the big orange store for less than 2 dollars so for less than $14, my trash can is good as new.

Scritto da: Nyfiken

hard to install

These axial caps are difficult to install on a 1/2 inch axial. The metal is so hard that even hammering the caps they did not go in on axials. It is going to take a large force to get them to fit over the end of an axial and an axial the other end needs to be set on a block,