Súpravy vrtákov a závitníkov Hanson 80220

Name: Súpravy vrtákov a závitníkov Hanson 80220
Brand: Irwin Tools
SKU: 0042526802201
Price: 24.68 EUR
Availability: InStock

Brand:Irwin Tools

3.4/5

€
24.68

Balenie 5 kusov nástenných platní vrátane montážneho príslušenstva. Každá nástenná doska meria približne 4,5 x 2,75 palca. Doštičky sú vyrobené z ABS plastu, ktorý je odolný voči korózii, ťažko sa rozbije a odolá vysokým teplotám. Funguje so všetkými telefónnymi káblami 6P4C s konektormi RJ11.

Suma

Pridať do košíka Kúpte teraz

EAN: 0042526802201

Kategórie Nástroje a domáce potreby, Elektrické a ručné náradie, Ručné náradie, Vývrtky a raznice, Súpravy závitníkov a razníc,

Oxidový povrchový náter znižuje tendenciu triesok privarovať sa k závitníku. Povrchová úprava čiernym oxidom na všetkých kohútikoch Hanson s vysokým obsahom uhlíka. 10 - 24 Závitník + vŕtačka č. 25. Vrták #25. 10-24 NC závitník. Tieto vrtáky z rýchloreznej ocele pomáhajú zabezpečiť rýchle a presné vŕtanie. Samonastavovací závitník má oceľovú konštrukciu a je skvelý na bežné závitovanie. Táto praktická sada obsahuje závitník HCS (vysokokarbónová oceľ) a vrták HSS (vysokorezná oceľ).

Brand	Irwin Tools
Finish Type	Black Oxide
Item Dimensions LxWxH	6 x 2 x 1 inches
Material	Alloy Steel
Shank Type	Straight

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Billy

Adequate for most jobs.

It seems I need this size tap on a regular basis. I typically get 12 holes before it starts to get really stiff.

Scritto da: Tim Hjellum

Works great and worth the money

Worth the money. I've tapped many PVC pipes and the mister heads can be hand tightened and do not leak. Just make sure to remove the debris caused from the drill to make sure it doesn't clog the mister.

Scritto da: Pen Name

Great for misting systems

Worked perfect to install misters right into 1/2' pvc.

Scritto da: C. Buckley

Great product power tapped a bunch of holes without a problem

It is great to have it as a combo product that way you know that the drill is matched with the tap. I had a bunch of hole to power tap and had no problems with it in the drill.

Scritto da: G. T.

3 1/2 holes

This was used to tap into 1/8" thick 304 stainless flat stock. The tap threaded 3 holes and snapped 1/2 hay through the 4th hole. I used the supplied bit, lubrication and good tapping practice of cutting a few degrees and backing off to clear chips. The tap was not very strong. In my opinion drilling the hole one size bigger may help the tap last a little longer without impacting thread engagement.

Scritto da: Amazon Customer

Does the job

Great small "Kit"; have used and am completely satisfied. Of course, it is Hanson!

Scritto da: Steve

Great Product!

Great Product! Can't go wrong with Hanson taps.

Scritto da: Calvin A Thomas

the tap broke

The tap is brittle enough to break off in the hole made with the included bit, yet hard enough to be impossible to drill out when it does. A miracle of metallurgy.