Stolová svorka BESSEY TK-6 pre použitie so stolovým stolom REVO, WS-3+2K, S-10

Brand:Bessey

3.7/5

26.43

POPIS PRODUKTU BESSEY TK-6 je navrhnutý tak, aby držal rôzne nástroje bezpečne na vašom pracovnom povrchu. Svorka TK-6 sa môže použiť na pripevnenie ochranného mini zveráka S-10 k doske stola. Pracujú aj s 90° uhlovými svorkami WS-3 a WS-3+2K. Od predstavenia REVO je možné TK-6 použiť aj na pripevnenie svoriek K BODY na pracovnú plochu. Predávajú sa v pároch a možno ich nájsť spolu s WS-3+2K a S-10. BESSEY. Jednoducho lepšie. OD VÝROBCU Stolová svorka TK-6 sa ľahko pripája k uhlovej svorke Bessey série WS a pevne ju drží na pracovnom stole, aby držala, fixovala a vyrovnávala materiál pod uhlom 90 stupňov pri rámovaní, montáži nábytku, skriniach a pod. Pozinkované vreteno znamená presné upnutie a dlhšiu životnosť nástroja. Bessey je aj naďalej svetovým lídrom v kvalite a inováciách v technológii ručného upínania. Meno Bessey si medzi neprofesionálnymi a profesionálnymi drevármi vydobylo status preferovanej svorky. Drevoobrábacie, oceľové a zváracie svorky Bessey sú od základov navrhnuté a skonštruované ľuďmi, ktorých jediným zameraním sú svorky. Bessey používa svoje vlastné oceliarne na spracovanie najkvalitnejšej dostupnej ocele, čo zaručuje, že každá svorka je hodná mena Bessey. VLASTNOSTI * Ľahko sa pripája k uhlovej svorke Bessey série WS, ktorá pevne upne k pracovnému stolu * Na rámovanie, montáž nábytku, stolárstva a ďalšie * Pozinkované vreteno znamená spoľahlivé upínanie a dlhšiu životnosť nástroja ŠPECIFIKÁCIE * Príslušenstvo pre uhlovú svorku Bessey WS

EAN: 0091162055021

Kategórie Nástroje a domáce potreby,

Pevná čeľusť s priemerom 8 mm. Možno použiť aj na bezpečnú montáž nových svoriek K BODY REVO na pracovný stôl. Drží ľahkú svorku zveráka S-10 na rovnej pracovnej ploche. Drží 90° uhlové svorky BESSEY WS-3 a WS-6 na pracovnej ploche.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Bessey
Color Silver
Color ‎Silver
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 1,310 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components ‎Unit^Instruction Guide
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎Yes
Item Dimensions LxWxH 6.5 x 5.13 x 1 inches
Item model number ‎TK-6
Item Package Quantity ‎1
Item Weight 0.4 Pounds
Item Weight ‎6.4 ounces
Manufacturer ‎Bessey
Material Alloy Steel
Material ‎Alloy Steel
Part Number ‎TK-6
Power Source ‎Hand Powered
Product Dimensions ‎6.5 x 5.13 x 1 inches
Size ‎Table
Style Table
Style ‎Table

3.7

13 Review
5 Star
82
4 Star
9
3 Star
4
2 Star
1
1 Star
4

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: V. Bandeira de Mello
Bessey customer service is not customer oriented
My KRE3512 arrived with a missing jaw pad. Instead of returning the order to Amazon, I decided to contact Bessey Tools to check if they could send me a jaw pad and avoid the return. I called them and was told the would gladly mail one to my address. I confirmed the information via email on March 10 and got a reply on March 13 stating the part would take 2 to 3 weeks to be delivered. After 3 weeks and no part, I started sending emails and finally called them again since I had not received the part. Finally, on April 21, I received the a set of jaw pads, but unfortunately, not those that would fit the KRE3512. Emails sent again without any acknowledgements. I gave up and ordered the replacement pad from Amazon. In summary, don't count on Bessey Tools Customer Service to be of service.
Scritto da: Alex M
Used for custom "fences"
Made curbs for wife's sewing machine table. Non-marring tightening end is vinyl padded.
Scritto da: M. Karst
Great product and customer service!
Product is listed as a two pack but you will only receive a one pack. However, Amazon assured me that that issue will be resolved. I received a refund from Amazon customer service. FYI This product will work on the original K-body clamps that have a hole on the end.
Scritto da: Awol
When you need the best
It would be very difficult to find a better clamp than Bessey, period. Not even Woodpecker and their famous build quality can hold a candle to these clamps in terms of performance and value. Try to find these on a sale to ease the pain, and if you don't really need the best, the Bauer brand at Harbor Freight is actually very good.
Scritto da: FormosaSavage
Solid clamp
Exactly what I was looking. Solid, super strong component not made im China.
Scritto da: pdwilkersn
Keeps longer bars from tipping in KP blocks with smaller pieces.
I can only see a couple uses for this. When using long clamps the KP blocks on small pieces, you can slide this and the other jaw towards the center to balance the clamp so it doesn’t tip out of the KP blocks. The other is if you lose the plastic end support it, you could balance the weight the same way.
Scritto da: THT
Exellent set KREK2440, bad manufacturing
USA-made 40 inch clamps are of good quality, however made in China 24-inch clamps are not good. In spite of shorter length their metal bars are bent and slightly twisted. They are not parallel as well, even under high pressure. Amazon promptly mailed replacement, again 40 inch clamps are good, but both 24 inch clamps have the same problems.
Scritto da: Stephanie K.
Jaws parallel and product arrived undamaged
These clamps are not cheap so I did my homework. Folks has issues with the clamps getting damaged during shipping due to inadequate packaging, and they had issues with the jaws not being parallel when tightened down. I had neither of these issues so wanted to provide this review in case others are on the fence over these same potential problems. First the packaging. I purposely got these clamps shipped from and sold by Amazon because I knew they would help me if the products arrived damaged. Packaging is 100% from Bessey, Amazon is not adding any of their boxes. This kit is heavy, just under 40 lbs (I weighed it) so the potential to get damaged in shipping is there. The box arrived a bit banged up so I was worried I would have to deal with the hassle of exchanging, but everything was fine. There are three individual packages within the main box, and once I got past the initial banged up outer box, everything was in good shape. You get 1) the two 24" clamps packaged together in a box, 2) the two 50" clamps packaged together in a second box, and 3) the extenders packaged together in a third box. The extenders are loose in their smaller box but they are beefy and each comes in that super-strong-cut-your-hand-open-rigid plastic. The clamps come with a cardboard protector on the rails and the ends are snuggled in high density plastic foam. No damage. I think the fact that this is a kit helps with shipping, because there are multiple items, and therefore everything fits together like a puzzle and helps with overall resistance to shipping damage. As for my second concern, the jaws are indeed parallel. There is a slight angle to the jaws when not tightened down, but this corrects to parallel under tension. Time will tell how these really perform, but first impression = impressed. Happy I made the purchase.
Scritto da: Ron B.
Perfect for the sacrificial fence on my table saw.
I have an older Craftsman table saw and these work great for mounting a sacrificial fence.
Scritto da: David MacDonald
Excellent clamps
Arrived before date promised. Excellent niche clamps to secure a sacrificial fence to your table saw or chop saw
Scritto da: Claudine T.
Utile...
Très utile! Livraison rapide.
Scritto da: Adam Howse
Very useful little clamp
This was a smaller clamp than I thought it would be though it's still just as good for what I need it for. Other clamps won't do, this is specialist equipment imo hehe.
Scritto da: consumer 101
bought to use on my table saw
haven't attached yet as it was not needed at the time

Súvisiace produkty

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array