Stens New OEM Náhradný remeň 265-211 Kompatibilný s Cub Cadet RZT42 a RZT50, MTD RZT50VT a RZT54 754-04043, 754-04043A, 754-04043B, 934-09504A, 934,99504 B

Name: Stens New OEM Náhradný remeň 265-211 Kompatibilný s Cub Cadet RZT42 a RZT50, MTD RZT50VT a RZT54 754-04043, 754-04043A, 754-04043B, 934-09504A, 934,99504 B
Brand: Stens
SKU: 0023899328789
Price: 47.62 EUR
Availability: InStock

Brand:Stens

3.7/5

€
47.62

**Pred nákupom overte, či sa diel hodí** Špecifikácie: Popis: Použitie OEM náhradného remeňa: Typ hnacieho remeňa: ZakrytýDĺžka: 57 3/4Šírka: 1/2Typ balenia: Značkové puzdro Nahrádza OEM čísla:Cub Cadet: 754-04043, 7454A,04 -04043B, 954-04043, 954-04043A, 954-04043BMTD: 754-04043, 754-04043A, 754-04043B, 954-04043, 954-04043, 0434-04B. Pre: Cub Cadet: RZT42 a RZT50MTD: RZT42, RZT50, RZT50VT a RZT54

Nie sú k dispozícii žiadne jednotky

EAN: 0023899328789

Kategórie Terasa, trávnik a záhrada, Vonkajšie elektrické náradie, Náhradné diely a príslušenstvo, Nástroje a príslušenstvo k kosačkám na trávu, Výmena kosačiek na trávu Parts,

Diely značky Stens sú dôveryhodné profesionálnymi predajcami pri vykonávaní opráv v kvalite OEM. Názov Stens je uvedený na všetkých obaloch produktov Genuine Stens. 1-ročná záruka Stens zaisťuje spoľahlivosť a výkon každej časti. Sme si istí, že naše produkty budú fungovať bezchybne, ale v zriedkavých prípadoch, keď to tak nie je, ich vymeníme kedykoľvek do jedného roka od vašej objednávky. Kompatibilné/náhradné pre: Cub Cadet: RZT42 a RZT50, MTD: RZT42, RZT50, RZT50VT a RZT54. Nahrádza OEM čísla: Cub Cadet: 754-04043, 754-04043A, 754-04043B, 954-04043, 954-04043A, 954-04043B, MTD: 754-0754043,A44043 954-04043, 954 -04043A, 954-04043B. Špecifikácie: Popis: OEM náhradný remeň, Aplikácia remeňa: pohon, Typ remeňa: zakrytý, Dĺžka: 57 3/4, Šírka: 1/2, Typ balenia: Značkové puzdro.

Country of Origin	USA
Customer Reviews	4.6 4.6 out of 5 stars 306 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer	No
Item model number	265-211
Item Weight	6.4 ounces
Manufacturer	Stens
Product Dimensions	13 x 4 x 2 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: JIM

Fit good.

Fast delivery, fit good.

Scritto da: RAT

Fit Cub Cadet RZT-50 perfectly

It was not as easy to install as I would have liked, not as a fault of the belt. Since I could not free the belt drive pulley bolt I ended up pulling the 4 engine to deck bolts, slid the engine forward ,& rocked it a bit to install the new belt past the drive belt cluch assy stop. It worked. Oh, I did have to pull the muffler to do that as well. Wasn't all that bad.

Scritto da: superman

great product.

fits and works very well on my mower.

Scritto da: Dennis

Decent belt at good price

Bought this belt as I trusted Stens. Belt looks nice. Have run it for about 10 hours or so with no problems. This type of belt is not easy to install. No fault of the belt, just the location on the mower where it must go. The belt itself went on fine. It is the right size.

Scritto da: john masseria

On 3rd cut of 2 acre property no slipping previous belt from tractor supply lasted 3 cuts

Used on cub cadet rzt 50 drive belt not mower deck

Scritto da: B. Mosch

Belt is too long for ZT-54 mower and will not last long

I bought this for our White (same as MTD or Cub Cadet) 54" zero-turn model ZT-54 made in 2008. Put it on the mower in January or February, and in July it was shredded and broke. I had noticed over the last couple months that the idler pulley looked out of line and at an angle, but turns out that the idler pulley is fine. The real problem was that this Stens belt was a little longer than the stock belt which allowed the idler pulley to move too far and hit against a bolt that is on the mount plate above. The idler pulley mounting arm was forced downward by jumping over the bolt above, so the idler pulley was pushed downward and at an incline. That angle and position of the pulley was extreme enough that it finally destroyed the belt after only 4-5 months of use. You can test your idler pulley situation to see if you'll have the same problem before ordering this. Take the drive belt off of one of the wheel drive pulleys so it lets the idler pulley move as far as it wants to go on its own. Use your hand to push the idler pulley outward (takes a bit of force), and slowly let it go back to its resting position. If the same bolt is in the way as mine has, you will notice the pulley gets kicked downward to get past the bolt (you might even have to pull it downward slightly to get it to jump over it). If yours does this, do not order this belt. I'm going to see if I can find a real MTD belt or one even a 1/2" shorter from stock.

Scritto da: Judy

Belt fit perfectly,

Belt fit perfectly and you don't need to pull the clutch off to install it. I bought a diffrent brand from someone that was supposed to fit but didn't...great buy here....

Scritto da: 1 Sweet Ol Bear

same as OEM

Brigg and Stratton owns STENs so the products seem to be just as good at less cost..

Scritto da: Adam Penny

Exactly as described

Exactly as described and a great fit for my cub cadet rzt