Štartovacia súprava 15-dielneho smerovacieho bitu Trend, stopka 1/2 palca, hrot z karbidu volfrámu, vrátane úložného puzdra, 15-dielna súprava SET/SS9X1/2TC

Name: Štartovacia súprava 15-dielneho smerovacieho bitu Trend, stopka 1/2 palca, hrot z karbidu volfrámu, vrátane úložného puzdra, 15-dielna súprava SET/SS9X1/2TC
Brand: Trend Enterprises
SKU: 5027654034767
Price: 85.33 EUR
Availability: InStock

Brand:Trend Enterprises

3.6/5

€
85.33

POPIS PRODUKTU Trend 15-dielna súprava frézovacích bitov obsahujúca 1 x jednu drážku priemer 4,8 mm x 11 mm

Suma

Pridať do košíka Kúpte teraz

EAN: 5027654034767

Kategórie Nástroje a domáce potreby, Elektrické a ručné náradie, Nástroje a príslušenstvo k elektrickému náradiu, Nástroje a príslušenstvo k frézam, Router Bits, Bity na stolárske výrobky,

PLASTOVÉ POUZDRO: Identifikačné indikátory pre rýchle rozpoznanie profilu, sada je cenovo dostupný spôsob, ako experimentovať a vylepšiť svoje smerovacie schopnosti. ÔSME LOŽISKOVÉ VODENÉ FRÉZY: S 2 x okrúhlou frézou, skosenou frézou, zarovnávacou frézou, 2 x drážkovou frézou, drážkovou frézou a ogee lisovacou frézou na profilovanie hrán. SEDEM NELOŽISKOVÝCH FRÉZOV: Obsahuje 4 rovné frézy, jadrovník, V drážku a rybinovú frézu Ideálne na použitie s plotmi, vodiacimi puzdrami, šablónami a pravítkami. VYNIKAJÚCA HODNOTA: Ponuka základnej úrovne najpopulárnejších fréz na dekoratívne a konštrukčné spracovanie dreva, od jemnejšieho nábytku až po aplikácie menšieho stolárskeho typu Ideálna súprava základnej úrovne pre frézy s kapacitou stopky 1 2 palcov. PEVNÉ REZNÉ HRANY Z KARBIDU VOLFRÁMU: Frézy pre zvýšený výkon a odolnosť v masívnom dreve a abrazívnych doskových materiáloch vrátane vrstvy a MDF.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Trend Enterprises
Brand	‎Trend Enterprises
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 1,657 ratings 4.6 out of 5 stars
Cutting Angle String	45 Degrees
Cutting Angle String	‎45 Degrees
Included Components	‎15 PIECE STARTER CUTTER SET
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	7.99 x 11.42 x 2.13 inches
Item Dimensions LxWxH	‎7.99 x 11.42 x 2.13 inches
Item model number	‎SET/SS9X1/2TC
Item Package Quantity	‎1
Item Weight	‎2.84 pounds
Manufacturer	‎Trend
Material	Carbide
Material	‎Carbide
Measurement System	‎US
Minimum Bore Diameter	‎0.75 Inches
Number Of Pieces	‎15
Part Number	‎SET/SS9X1/2TC
Product Dimensions	‎7.99 x 11.42 x 2.13 inches
Shank Type	Straight
Shank Type	‎Straight
Size	‎15Piece Set
Surface Recommendation	‎Engineered Wood
Tool Flute Type	‎Straight
Warranty Description	‎1 year manufacturer

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: mike kass

Good value

I was reluctant to buy these router bits. But I didn’t want to spend $200+ on the cmt bits. I saw a review on you tube and the guy had decent things to say about the trend bits. I have test four how them on pine. No burning good smooth cut. I did have one bit slide In the Collett. Not a big issue. For the money you can’t go wrong

Scritto da: James W Smetana

Broke the first time using

I purchased this set on Nov. 30, 2019. Today, Nov. 29, 2020 I had a project that required using the 1/4" Straight bit. I drilled a hole in the plywood since I do not have a plunge router base for my Porter Cable 890 router. The first circular pass went well. I was routing less than 1/4" into 3/4" plywood. Upon lowering the bit I proceeded to route a second pass, again this time less than 3/16" in depth. The bit lasted at best 5 inches before it broke off inside the collet. Needless to say, I waited far too long to even attempt to use these bits to ask for a return/refund. I will attempt to contact the supplier to see if they will stand behind their product. Not holding my breath. Update:Dec.8,2020. I received an email today from Trend stating that a replacement bit is being sent. They do stand behind their product.!!

Scritto da: O. AL BUGEAEY

Nice bits

Nice set.. I need a project to test them out..

Scritto da: Amazon Customer

Cheap

I ordered another set thinking the first one that showed up just like this was just a fluke but this is the second set that I've received it looked just like this. Buyer beware

Scritto da: Aleksandr Serstjuk

good quality for good price

good quality for good price

Scritto da: Stephen2k1

Disappointed Trend quality control (dangerous)

The media could not be loaded. Diy'er who buys for quality over price. Trend TCT 24pc router starter set. The router bit I had been waiting for in the set arrived with bent shaft. Had I not inspected it first, used in router, it would have been very dangerous at the high speed a router works at. It would no doubt throw the router all over the place as well as destroy the workpiece. Shame on Trend. Would not expect this even from a cheep router set. However, Amazon sending replacement set without quibble, top marks, so here's hoping it's a one off from Trend. The rest of the router bits seem very sharp, well made and good storage case.

Scritto da: Paul Howarth

Good price

These do fine for the sort of work I do, find they go dull fairly quick. If I wanted absolute precision I would buy a better quality product.

Scritto da: costache mihai

Good product, just the box damaged

Good product but the box's glass is not very strong and actually came broken.

Scritto da: P.F

Value for money

Arrived with the very fragile see through panel completely broken and all the bits loose. Used the 1/2” 6.3mm bit to test a new Makita router and it snapped in 3 seconds! Tried a couple of other bits and they seemed ok. Returned for a refund. Purchased the 35 piece 1/2” set as it works out very good value. A little nervous about the strength of the thinner bits.