Sťahovák kaziet Danco 86712 Moen, balenie 1 ks, strieborný

Brand:Danco

3.5/5

42.57

Majte všetky svoje zásuvky poruke a pripravte sa na svoj ďalší projekt s držiakom na zásuvky so 4 koľajnicami. Je vyrobený z odolného plastu a ocele, ktorá odoláva hrdzi a korózii. Tento vysokokvalitný držiak je ideálnou voľbou na uloženie celého radu zásuviek a umožňuje rýchlu identifikáciu pre väčšie pohodlie.

POSTAVENÉ NA VYDRŽANIE: Odolná hliníková konštrukcia poskytuje pevnosť a spoľahlivosť. VAŇOVÉ/SPRCHOVÉ BATÉRIE: Nástroj na odstraňovanie vložiek slúži na odstránenie starých opotrebovaných kaziet z vaňových a sprchových batérií Moen. KOMPATIBILITA KAZETY: Sťahovák kaziet je navrhnutý tak, aby nasadil a odstránil mosadzné aj plastové kartuše. FUNKČNÉ: ​​Odstraňuje zamrznuté kazety a uvoľňuje návleky LEN na kohútikoch MOEN. KOMPATIBILNÉ S MOEN: Vymeňte svoju starú vaňu/sprchu Moen Posi-Temp za model Danco 88431E (nahrádza OEM#1225), model 80993TS (nahrádza OEM#1200), model 88675A (nahrádza OEM#1222). NÁSTROJ NA ODSTRÁNENIE NÁPLŇOV: Odstráni vane/sprchy Moen Posi-Temp tlakovo vyvážené sprchové kazety série 1200, 1222 a 1225.
Batteries Included? ‎No
Batteries Required? ‎No
Color ‎Silver
Customer Reviews 4.5 4.5 out of 5 stars 3,801 ratings 4.5 out of 5 stars
Finish ‎Steel
Included Components ‎Cartridge Puller
Is Discontinued By Manufacturer ‎No
Item model number ‎86712
Item Package Quantity ‎1
Item Weight ‎4.6 ounces
Manufacturer ‎Danco, Inc.
Material ‎Aluminum
Measurement System ‎Metric
Part Number ‎86712
Product Dimensions ‎1.4 x 5.1 x 7.1 inches
Size ‎Pack of 1
Style ‎Puller
Warranty Description ‎Limited 1 Year

3.5

13 Review
5 Star
72
4 Star
14
3 Star
7
2 Star
3
1 Star
4

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Michael L.
Worked like it's supposed to.
Puller worked like it was made to, pulled it out to the limit of the pressure nut, pulled some by hand, but the old cartridge was half way out and still stuck. Took the puller off, got a 1 inch piece of 1 inch sch 40 pvc ( or get a 3/4 in pvc coupler and cut off what you don't need, both are 1 in inside diameter) and put it on the cartridge to extend the reach of the nut. Put the puller back on, turned the nut a few more times, and got the mangled mess of rubber all the way out. Disregard the youtube videos that say pull it out with channel lock pliers, unless you're feeling lucky and the cartridge you're pulling out hasn't been in there very long.
Scritto da: Robert J. Keltos
Worked great for removing old cartridge.
This is a must to remove the old cartridge without too much difficulty. Take your time and it does the job.
Scritto da: Robert K
worked pretty ok for me.
worked pretty ok for me, but it would be better if the pressure bolt were large to help remove the valve further.
Scritto da: Amazon Customer
perfect
just what I needed. Did the job.
Scritto da: Amazon Customer
prevented the stuck valve that was shown on you tube
arrived on time and as described, will keep for any future repairs sine all faucets in my house are moen first repair in thirty years
Scritto da: Steeler50
Works well and much cheaper than a Mown one. Save some money with tis one.
All good and works well.
Scritto da: Bez
Works like a charm
Did 3 cartridge pulls without a problem. Very easy to use and durable. I recommend for those stubborn cartridge replacements.
Scritto da: GEORGE FOLDI
Ease of use
This Moen Cartridge Puller worked GREAT. I tried using the instructions that Moan gave with the new cartridge and their way I would need three men and a boy pulling to get the cartridge out. Using this puller made it so much easier. Connect the puller to the old cartridge and then using a crescent wrench I just slowly kept turning the wrench on the puller and in about four turns the old cartridge started to move out of the housing. So relieved once it was removed. After that putting the new one in was a breeze. Would recommend this for anyone having to remove an old cartridge. To bad they don't make a universal puller for other cartridges.
Scritto da: Xenos
Good tool for its purpose
My 22+ years Moen bath/shower faucet had begun dripping at the handle whenever I turned the water on and for years had been stiff so I finally decided to fix it by replacing the cartridge with a new one. I initially tried to pull the old cartridge out using just a pair of pliers but I was unable to do so. I checked online for advice and saw a number of references to a Moen brand cartridge puller tool but it was listed at over CAN$40. The cartridge itself was listed at CAN$36 at one of the big DIY stores. Reluctant to pay 40 bucks for a tool that I would probably never use more than once, I looked for a cheaper alternative and I found it in the Amazon listing for this tool. Yes, the tool is made of aluminum rather than steel and some of the plating came off after using it but it worked like a charm and I was able to replace the cartridge with the new one very easily. Oh and the new cartridge it turns out didn't cost me anything because the faucet came with a lifetime warranty. So for the 20 bucks I paid for this tool, I was able to bring back my old faucet to a brand new condition and it now works smoothly without any dripping. Overall this is a good tool for its purpose.
Scritto da: Amazon Customer
Four Stars
Nice tool Thanks
Scritto da: Brett
Works good and worth the money
Very light material compared to my other puller.. but it worked well. I broke my other cartridge pulling it out with my other cartridge puller that was meant for a different cartridge so I wanted to get this one that was meant for my cartridge so I didn't break it and spend hours trying to drill out my cartridge being careful to not hit any pipe. I got the cartridge half out and broke it again with this one but that was my own fault because I started to put pressure from side to side instead of pulling straight out. . But having it half out only took a couple mins to destroy and pull out the old cartridge. So I would say this is worth buying just don't push side to side.
Scritto da: wilma elliott
An excellent tool that's simple to use
What a slick invention! The cartridge came out easily.
Scritto da: jrb_sland
Well made, will be worth the money with a very stuck cartridge
Several YouTube videos about replacing Moen cartridges use this {or similar} tool to make cartridge removal more effortless. Turns out I didn't actually need it this time around, but I have other Moen faucets in my house, and the tool sits quietly at the bottom of a bathroom cabinet drawer...

Súvisiace produkty

hot
Kazeta Pfister S74-2920 Avanti
3.8/5

€ 61.54

Kazeta Pfister S74-2920 Avanti
3.8/5

€ 61.54

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array