SharkBite 1/4 (3/8 palca vonkajší priemer) x 1/2 palca FNPT redukčný adaptér, mosadzná armatúra pre pripojenie, PEX rúrka, meď, CPVC, PE-RT, HDPE, U066LFA 1/4 palca x 1/2 v.

Name: SharkBite 1/4 (3/8 palca vonkajší priemer) x 1/2 palca FNPT redukčný adaptér, mosadzná armatúra pre pripojenie, PEX rúrka, meď, CPVC, PE-RT, HDPE, U066LFA 1/4 palca x 1/2 v.
Brand: SharkBite
SKU: 0697285605701
Price: 25.54 EUR
Availability: InStock

Brand:SharkBite

3.6/5

€
25.54

ŠPECIFIKÁCIE: Vyrobené z kovanej mosadze DZR; tento redukčný adaptér vydrží 200 stupňov F a 200 PSI. PREFEROVANÝ ODBORNÍKMI: Nástroje a armatúry SharkBite spĺňajú rovnaké vysoké štandardy pre komerčné a rezidenčné inštalatérske aplikácie, pričom kombinujú odolnosť a jednoduché použitie vhodné pre aplikácie pod zemou a za stenou bez prístupových panelov. JEDNODUCHÁ INŠTALÁCIA: Inovatívny dizajn push-to-connect redukčných adaptérov SharkBite push umožňuje rýchlu a jednoduchú inštaláciu bez potreby náradia, krimpovania, lepidla alebo spájkovania; možno inštalovať do mokrých liniek. VŠESTRANNÉ: Pushfit samičie redukčné konektory fungujú dobre s PEX, CPVC, PE-RT, SDR-9 HDPE a medenými rúrkami; tvarovky s veľkým priemerom (1-1/4 palca až 2 palce) vyžadujú pri pripájaní k PEX rúrke výstuž. SHARKBITE MOSADZNÝ VNÚTORNÝ REDUKČNÝ ADAPTÉR: Táto spojovacia armatúra vám umožňuje rýchlo a jednoducho vykonať prechod medzi rúrkou a závitom MNPT; ideálne pre prácu v stiesnených priestoroch; odstráňte pomocou odpájacej spony alebo odpojovacích klieští.

Nie sú k dispozícii žiadne jednotky

EAN: 0697285605701

Kategórie Nástroje a domáce potreby, Hrubé inštalatérske práce, Trubky, rúrkové armatúry a príslušenstvo, Trubkové armatúry,

Batteries Required?	‎No
Brand	SharkBite
Brand	‎SharkBite
Color	Brass
Color	‎Brass
Connector Type	Adapter
Connector Type	‎Adapter
Customer Reviews	4.5 4.5 out of 5 stars 549 ratings 4.5 out of 5 stars
Exterior Finish	Brass
Exterior Finish	‎Brass
Included Components	‎Reducing Adapter Fitting
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	1.2 x 4.5 x 6.8 inches
Item Dimensions LxWxH	‎1.2 x 4.5 x 6.8 inches
Item model number	‎U066LFA
Item Package Quantity	‎1
Item Weight	0.05 Pounds
Item Weight	‎0.05 Pounds
Item Weight	‎0.8 ounces
Manufacturer	‎Cash Acme
Material	Brass
Material	‎Brass
Measurement System	‎inch
Number Of Pieces	1
Number Of Pieces	‎1
Part Number	‎U066LFA
Product Dimensions	‎1.2 x 4.5 x 6.8 inches
Size	1/4 in. x 1/2 in.
Size	‎1/4 in. x 1/2 in.
Style	‎Brass Push Female Reducing Adapter
Thread Type	NPT
Thread Type	‎NPT
Warranty Description	‎Limited 25 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Amazon Customer

Really helps with tough to reach copper pipe areas

I used it to repair a very old copper pipe with dents. The pipe does need to be round. And, it was in an area where it was tough to sweat the pipe. So, cut off the old sweated connection, cleanup the pipe and use this adapter to connect my water heater. Very easy.

Scritto da: thewindmariah

Awesome!

Worth every penny! We should not soder anywhere close to plastic fittings so these shark bites are perfect for the job and fast to apply! I used flexible pipe with them! Loved!

Scritto da: Michael Johnson

Easy to install

Replaced my old water softener. Needed new connections. These made the job quick and simple. Removed the old, installed the new fittings, cut the PEX to length and pretty much done. Be sure to use Teflon Paste when connecting brass to plastic it's a must.

Scritto da: Grant S.

Last part iI needed to comment PEX to my new water softener

I went from 3/4” copper to 3/4” PEX using a SharkBite coupling and then used this SharkBite adapter to connect the PEX to my water softener. This allowed me to have a little flexibility with my final reach between the copper pipe and water softener and I can also give the final connection a twist if it’s not tight enough.

Scritto da: Brian Hunsicker

Almost perfect

Bought several pieces at once, and if it wasn't for the cost, would have been a perfect 5.

Scritto da: Michelle H.

Amazing product

Amazing product soiled seal no leaking. simple quick attachment. Pay attention to how to prepare a metal pipe before connecting. I love this product.

Scritto da: MinnesotaWT

One serious flaw, I can't be the only one

No matter the tape or dope used, these would not seal to the water softener outlet which are very standard brand to brand. Why? The Sharkbite has a tapered seat! Soft water outlets are flat so if you can crank it down tight enough with enough tape you may get it to seal, but you really shouldn't do that with brass to nylon. This took a 20 minute job and turned into hours of messing around until I went to the plumbing supply store and got a couple of WolverineBend that have flat rubber gaskets and they sealed the first time. You should never stress nylon with any type of metal fitting as it will put bad stress on the nylon threads eventually leading to failure. Hard pass.

Scritto da: Amazon Customer

They just work, period!

These fittings can be a little spendy, But they work perfectly, are easy to install and can easily be reused with the removal tool.

Scritto da: Amazon Customer

Five Stars

Excellent fit and quality

Scritto da: Bradyn

Became weaker over time

Great product to begin with. Used it to connect hose to pig waterer and the connection was strong. However after a month the connector became weak and would not hold with much pressure.