PSI Woodworking LDC2MT Živý koník 1/2 skľučovadlo s kužeľovým držiakom Morse č. 2

Brand:PSI Woodworking

3.6/5

88.97

Freeman SF16-2C25 16-Gauge 2 lepené pozinkované rovné klince (počet 2500) sú určené na dokončovacie práce, ako sú obloženie, základné dosky, korunové lišty, kryty dverí a okien, skrinky a konštrukcia nábytku. Tieto dokončovacie klince sú navrhnuté tak, aby minimalizovali štiepenie dreva a sú vyrobené z galvanizovanej ocele pre dlhú životnosť. Sú vrcholom kvality a hodnoty a sú kompatibilné s väčšinou 16 kalibrových klincovačiek, ktoré sú schopné vypáliť 2 lepidlom zozbierané rovné klince – ako sú Freeman's PFN64, PFN64NQ, G2FN64, PXL31 a G2XL31. Každá škatuľka obsahuje 2 500 rovných klincov, aby ste mali v práci dostatok spojovacích prvkov na dosah ruky.

Nesmie sa používať na vŕtanie. Ideálne pre dodatočné bezpečné uchytenie obrobku z konca koníka; Umožňuje centrovanie a uchytenie vretien alebo kolíkov na konci koníka. Po namontovaní sa koník zmení z mŕtveho na živý a bude možné do neho vložiť tŕne, kolíky, čapy alebo akýkoľvek hriadeľ s priemerom do 1/2. Upevňuje sa na koník pomocou priloženého tŕňa Morse Taper č. 2; Otáča sa s guľôčkovými ložiskami. Premení mŕtvy koník #2MT vášho sústruhu na živý koník s namontovaným 1/2 skľučovadlom.
Batteries Required? ‎No
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 42 ratings 4.6 out of 5 stars
Included Components ‎#2MT Arbor, Chuck, Operating Key
Item model number ‎LDC2MT
Item Package Quantity ‎1
Item Weight ‎2.2 pounds
Manufacturer ‎PSI Woodworking Products
Measurement System ‎Metric
Part Number ‎LDC2MT
Product Dimensions ‎6.75 x 2.25 x 2.25 inches
Warranty Description ‎2 years under normal use

3.6

10 Review
5 Star
75
4 Star
13
3 Star
9
2 Star
0
1 Star
3

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Tom
It's OKAY
The only live chuck I can find that accepts a 1/2" shank. Has a tiny bit of play but it does the job.
Scritto da: Lee Y.
Cost effective, true running live tailstock drill chuck
Well constructed 3 jaw drill chuck, that runs true on it’s live tailstock bearing race. Makes it a simple process to create and use my own steel mandrels, in any diameter I need for my woodturning tasks.
Scritto da: John Burmeister
Good tool.
Every lathe owner should have one.
Scritto da: Héctor G.
Muy robusto y materiales de excelente calidad.
Excelente calidad de producto, lo uso para sostener un apéndice móvil de una pieza mientras le doy forma en el torno a la pieza y cumple su función de maravilla.
Scritto da: Dawson
what the doctor ordered
this is a very nice wood lathe accessory i turn model wheels from wood using an axle this just fit the ticket to hold outboard end of the axle
Scritto da: Greatview
Well made of high quality
This does just what it is designed to do. Properly machined without rough edges.
Scritto da: Robert P. Walters
Good item for the price
Holding work in a metal lathe
Scritto da: R. Marchionna
Works as advertised.
This works great for supporting small turnings.
Scritto da: David Maxwell
Almost perfect!
Solid! Superb smooth ball races; turns incredibly freely and smoothly, with no slack whatsoever. The drill chuck is a little rough to open and close, but has no visible runout with 6" long drill chucked in it, (so maintains absolute centring). Only deficit is that the MT-2 tapered stem is slightly too short to make contact with the automatic release in the tailstock, and the end is not tapped, (as is sometimes done), to accept a short bolt or stud to make it slightly longer. I turned a little metal bead, with a stub stem to fit into the hole in the end of the stem, and glued it in place. Works perfectly. Highly recommended, and excellent value for the money. And an excellent way to create a live centre to accept turnings with a centre hole about which to turn, (in my case, spinning wheel bobbins).
Scritto da: D
Take a chance and see if your a winner
Certainly not a precision chuck. There is 10 thousands runout on mine. Probably fine for a wood lathe but not for a metal lathe. It appears most of the run out is in the chuck itself so I am hoping replacing the poor quality chuck with something better will make it useable for my purposes. Buy Chinese tooling and take a chance, you might be luckier than me.

Súvisiace produkty

hot
Shop Fox D4657 Heavy Duty Sústruh Stojan
2.6/5

€ 745.02

Shop Fox D4657 Heavy Duty Sústruh Stojan
2.6/5

€ 745.02

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array