Prípravok POWERTEC 71643 s dvojitým vreckom na spracovanie dreva s adaptérom na zachytávanie prachu

Name: Prípravok POWERTEC 71643 s dvojitým vreckom na spracovanie dreva s adaptérom na zachytávanie prachu
Brand: POWERTEC
SKU: 0843441113348
Price: 46.47 EUR
Availability: InStock

Brand:POWERTEC

3.5/5

€
46.47

Predstavujeme súpravu prípravku na dvojité vreckové otvory od spoločnosti POWERTEC. Táto kompletná súprava, navrhnutá na presné vŕtanie vedľajších otvorov do vreciek na nových projektoch aj opravách, vám to umožní. Jedinečný systém zberu prachu prípravku z neho robí rýchlu, čistú a jednoduchú obsluhu, nepochybne jeden z najjednoduchších a najefektívnejších systémov prípravku s vreckom, ktorý je dnes k dispozícii. Vďaka prispôsobivému základovému systému vám tento všestranný nástroj pomôže ľahko zmerať hrúbku dreva. Súprava Twin Pocket Hole Jig je ideálna pre váš ďalší projekt, či už ste drevár, profesionálny tesár alebo kutil. * Rýchle nastavenie a jednoduché nastavenie pre rôzne veľkosti komponentov * Ideálne na škárovanie tvrdého dreva, mäkkého dreva a listových materiálov * Otočný adaptér zberača prachu zaisťuje prevádzku bez triesok a prachu * Použite dvojité vrecká na vyvŕtanie dvoch otvorov pre zvýšenie pevnosti alebo jednotlivé otvory pre užšie komponenty * Kalené vodidlá vrtákov po celej dĺžke pre presné vrecká a dlhú životnosť * Viacúčelový dizajn pre opravy, malé projekty a konštrukcie * Zabudovaná hrúbka obrobku, nastavenie hĺbky vŕtania a nastavovací mierka Balenie obsahuje(1) Prípravok(1) vrták (1) Dorazový golier(1) Šesťhranný kľúč(1) Unášač bitov R2(1) Adaptér zberača prachuPOWERTEC je popredný výrobca vysoko kvalitných drevoobrábacích nástrojov a príslušenstva, strojov a sortimentu náhradných dielov OEM. Zaviazali sme sa prekonávať očakávania a zároveň prinášať do odvetvia najnovšie inovácie, technológie a vývoj produktov.

Suma

Pridať do košíka Kúpte teraz

EAN: 0843441113348

Kategórie Nástroje a domáce potreby, Elektrické a ručné náradie, Nástroje a príslušenstvo k elektrickému náradiu, Príslušenstvo k súradniciam,

PREMIUM: Oceľové vodiace lišty vrtákov pre veľké zaťaženie sú nehrdzavejúce a poskytujú dlhodobé používanie. JEDNODUCHÉ POUŽITIE: Jednoduché nastavenie a použitie so zarážkami, prípravok zjednodušuje tento proces, udržuje presné merania a dosahuje krásne vyzerajúce spoje vreciek. KONŠTRUKČNÉ VLASTNOSTI: Prípravok s dvojitým vreckom je navrhnutý tak, aby umožňoval presné vŕtanie bočných otvorov vreciek pomocou adaptéra na zachytávanie prachu na prevádzku bez triesok (navrhnutý na prácu so súpravou univerzálnej hadice s malým portom POWERTEC 70257/ 70355/ 70356 (voliteľné príslušenstvo)) . FUNKCIA: Pri spájaní tvrdej, mäkkej alebo preglejky vytvára v priebehu niekoľkých sekúnd veľmi presné otvory na opracovanie dreva a pevné bezpečné spoje – poskytuje rýchlu a jednoduchú obsluhu. OBSAHUJE: (1) Súpravu prípravku na dvojité vreckové otvory s vrtákom, dorazovou objímkou, adaptérom na zachytávanie prachu, bitom R2 a šesťhranným kľúčom.

Batteries Required?	‎No
Country of Origin	‎Taiwan
Customer Reviews	4.5 4.5 out of 5 stars 750 ratings 4.5 out of 5 stars
Included Components	‎INCLUDES:
Item model number	‎71643
Item Package Quantity	‎1
Item Weight	‎9.5 ounces
Manufacturer	‎POWERTEC
Part Number	‎71643
Product Dimensions	‎7.5 x 2.75 x 1.75 inches
Style	‎Twin Pocket Hole Jig

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Zack Tyhurst

Decent Option for the Cost

I was able to use it for installing dowels into a woodworking project, but my main complaint is the acrylic flap that you use to clamp it to the side of your board is a little bit more flexible than I would like. You have to be careful while drilling or it will wander.

Scritto da: Debbie

Very good but limited

This worked okay for dowels on the edges of boards, but has virtually no use for surface dowelling. You will need to clamp this device TIGHTLY to your board, since it has a tendency to want to move.

Scritto da: Chad and Serra Hadsell

Great kit and well priced, but mine was missing the 1/4" drill bit

This kit has been great so far, and a pretty good value for the money. Fortunately, I don't yet have a use for the 1/4" doweling jig, because my kit is missing the 1/4" drill bit. So, minus one star for the missing bit. But that will be easy enough to replace if and when I need it.

Scritto da: A.A. Ron

Good for the money

This dowel jig definitely helped keep my boards in alignment when I was making a table top glue up. My only problem was the plexiglass part can flex so on a few spots the whole was out of alignment with the adjoining board. I moved the clamp closer to the black plastic part. Maybe it is a learning curve issue. There are more robust dowel jigs, but this will get you pretty far for $20.

Scritto da: Eric Lee

Works Great

Used to make a rustic coffee table. Worked well. I used a basic grip clamp to hold it in place while drilling.

Scritto da: Amazon Customer

Gets the Job down

Just clamp this down when you are drilling dowels. You can get away will holding it but I prefer to be safer rather than sorry. Quick and easy to use.

Scritto da: Mike R.

Don't drop it!

This jig is very breakable. One slip onto a concrete floor and it's toast!

Scritto da: brianb

clamp it and go.

Was making a Murphy bed cabinet for a rockler kit. had a tough time aligning dowels with the milescraft doweling jig I had bought. Ended up buying this and was able to get all the dowels aligned on the first try. This worked great for the edge dowels. Ended up using the milescraft jig on the faces since this is very awkward to clamp on a larger board. overall, using this and the included bit for edges, and the milescraft and it's included bit for the faces makes doweling very easy and fast. I am an extreme novice when it comes to this stuff. I tried to build this cabinet with the least amount of tools possible.

Scritto da: TC

Arrived not in original packaging

Mine arrived in a taped up plastic parts bag, with the drill bit (collar attached) jammed into one of the holes and missing the allan key. The collar scratched up the plastic, only cosmetic damage but still irritating. I had also ordered the 3/8" size and it arrived (separately) in proper packaging and with all parts in excellent condition - possibly different seller? Its going to work, and I have plenty of allan keys including the one that came with the other size but it was a bit disappointing after the good job done on the other size. Contrary to some other reviews I find the fit of bit to guide is very good, just enough play to ensure no binding of the bit. Test joints work well. Not the best jig I've ever used but by no means the worst. Lower rating is purely for the bad packaging and the cosmetic damage it caused (suspect it was a returned unit sent out as new)

Scritto da: Richard Poulin

Works well

I'm not an experienced woodworker. And I've started using this guide on a project with maple... quite hard. I still managed to drill my holes, but the jig does need some practice. Sometimes, the drill jams. But it's not the tool. The tool is sturdy and well made.

Scritto da: tigabec

Can't recommend. Holes not aligned!

Can you believe selling a drilling jig that don't have the holes aligned properly? Might as well save your money and drill without a tool if the result is unaligned holes!!!

Scritto da: Jesús R

Mejor de lo esperado

La verdad las plantitas está muy bien fabricadas.. es metal con acrílico de muy buen espeso..los topes tienen un sistema de ajuste diferente a los normales. Muy precisa al realizar los ensambles.

Scritto da: Doug B.

Accuracy and value get 1 star because I can not go to negative stars

Once the holes are drilled, they are offline by 1/64. I just bought an $80 paperweight. In case you are wondering the center line on the jig was perfectly aligned on my scribe line on the test pieces.