0
0

Celkom:€ 0.00

Pozri košíkOdhlásiť sa
LoginRegister
0

Celkom:€ 0.00

Pozri košíkOdhlásiť sa
LoginRegister

PREVODOVÝ KĽÚČ 16 ks. Sada kombinovaných račňových kľúčov Flex, metrické - 9902D 16 ks so stojanom na kľúče metrický

Brand:GEARWRENCH

3.8/5

€
430.41

POPIS PRODUKTU Ráčnové kombinované kľúče GEARWRENCH sú originálny patentovaný račňový kľúč! Koniec račňovej skrinky je navrhnutý tak, aby potreboval len 5° na pohyb upevňovacích prvkov oproti 30° pre štandardné kľúče. Kľúče sú vyrobené zo silnej legovanej ocele s lesklým, plne lesklým chrómovým povrchom. Konec račňovej skrinky má zaťaženie mimo rohu pre lepšie uchopenie spojovacieho prvku a znižuje zaoblenie spojovacieho prvku. Sú k dispozícii v rôznych dĺžkach a štýloch, vrátane dĺžky XL, stubby, flex, stubby flex a locking flex. Dodávané veľkosti: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 a 25 mm. AMAZON.COM 180-stupňová sklopná ohybná hlava. Prevodový kľúč kombinuje rýchlosť račne s prístupom a ovládaním kľúča s touto 16-dielnou metrickou sadou kombinovaných račňových kľúčov s ohybnou hlavou (model 9902). Praktická ohybná hlava sa nakloní až o 180 stupňov v akomkoľvek intervale pre vynikajúci prístup k upevňovacím prvkom a má dizajn pružinovej podložky, ktorá poskytuje nepretržité napnutie hlavy. Vrúbkovaný lúč kľúča vám umožňuje cítiť, ktorým smerom ťahať. Ponúkajú jednoduchý 5-stupňový pohyb pri otáčaní upevňovacích prvkov oproti 30-stupňovým na štandardných kombinovaných kľúčoch. Malý dizajn koncovej hlavy račne umožňuje prístup do úzkych miest, kde sa račňa nezmestí. Otvorený koniec umožňuje uchytenie matíc a skrutiek bez odstránenia kľúča z upevňovacieho prvku, vďaka čomu budú práce rýchlejšie a jednoduchšie. Táto súprava sa dodáva so skrinkou na kľúče, ktorá drží kľúče na mieste pre ľahkú prepravu a skladovanie. ČO JE V KRABIČKE 16-dielna sada metrických kľúčov s lisovaným stojanom na kľúče a nasledujúcimi veľkosťami kľúčov: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 a 25 mm O PREVODOVÝCH KĽÚČOCHOd uvedenia originálneho patentovaného 50-tich račňového kľúča GearWrench neustále vedie k prelomom v prechodových račňach/matici, nástrčkach, skrutkách kliešte a špeciálne nástroje. Bez ohľadu na to, v akom odvetví sa nachádzate, GearWrench má nástroje, ktoré vyhovujú vašim potrebám – od presných až po takmer nezničiteľné. Na ručné náradie GearWrench sa poskytuje záruka na životnosť bez chýb materiálu a spracovania.9902 16-KUSOVÝ KOMBINOVANÝ RAČNAČOVÝ KĽÚČ S KOMBINOVANÝM OHNISKOU HLAVOU 16 KÚSOK NA POHĽAD * Ohybná koncová hlava sa nakláňa až o 180 stupňov v akomkoľvek intervale * Vrúbkovaný nosník kľúča * 5 -stupňový račňový oblúk * Elegantný dizajn hlavy pre prístup do úzkych miest * Surface Drive poskytuje pevnejšie uchopenie upevňovacích prvkov a znižuje zaoblenie * Leštený chrómový povrch * Doživotná záruka

Suma
Pridať do košíkaKúpte teraz

EAN: 031112511627

Kategórie Nástroje a domáce potreby, Elektrické a ručné náradie, Ručné náradie, Kľúče, Kombinované kľúče,

Dôveryhodné, navrhnuté a používané odborníkmi. Všetky naše produkty boli navrhnuté s ohľadom na požiadavky profesionálov. Medzinárodné renomé pre našu rozmanitú škálu produktov. Nástroje Gearwrench sú vyrobené tak, aby odolali aj tým najnáročnejším prácam. Popredný výrobca vysokokvalitného náradia.
Batteries Included? ‎No
Batteries Required? ‎No
Brand GEARWRENCH
Brand ‎GEARWRENCH
Color Multi
Color ‎Multi
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 1,434 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Finish ‎Polished
Finish Type ‎Polished
Head Style ‎Flex
Included Components ‎1 Gearwrench Branded Product
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 13.9 x 10.5 x 2 inches
Item Dimensions LxWxH ‎13.9 x 10.5 x 2 inches
Item model number ‎9902D
Item Package Quantity ‎1
Item Weight 8.54 Pounds
Item Weight ‎8.54 Pounds
Manufacturer ‎GearWrench
Material Alloy Steel
Material ‎Alloy Steel
Measurement System ‎English/Standard
Operation Mode ‎Mechanical
Part Number ‎9902D
Pattern ‎Metric
Power Source ‎Hand Powered
Product Dimensions ‎13.9 x 10.5 x 2 inches
Size ‎16 Pc
Style ‎With Wrench Rack
Thickness ‎2 Inches
Warranty Description ‎Manufacturer

3.8

11 Review
5 Star
84
4 Star
9
3 Star
3
2 Star
2
1 Star
3

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Amazon Customer
Top notch
Top notch quality. I use them for many years professionally . So far zero issues.
Scritto da: unknown
Very useful wrenches
These are incredibly useful wrenches and very well made.
Scritto da: kinyua mwangi
Great Quality
Tools look to be of great quality. Very happy with my purchase.
Scritto da: Tim
Not great finishing
I was really excited to finally get a ratcheting wrench set. However, the finishing on these wrenches are terrible. I heard that their quality was good in the past, but since had went done significantly. I can't say for sure how durable the mechanisms are, but from the picture you can see the manufacturer didn't pay much attention to detail. Pro: 8mm to 25mm. Note this set actually skip 20mm and 23mm. They are less commonly used, but just be aware of that. The flex head is tight enough as new, so that's good. Price is very decent at $10 a piece on average. Con: Just by a quick inspection, I've found several cosmetic defects. It may not affect the use of the wrenches, but it doesn't give me confidence on the quality of the set. I'm paying a lot for this set and expecting more from GW as a reputable company. The machined markings on the side of 13mm doesn't go all the way across the body of the wrench, it's only 3/4 in. long, which is useless when you try to feel for the ratcheting direction of the box end or try to get extra grip. On the 12mm, the middle part of the wrench isn't straight, see the waving pattern. The box end has a pretty obvious dent or filed off part and they just put chrome over it. As I said in the beginning, the overall finish is subpar, even when each wrench on average only cost about $10. I've decided to return this set and get a complete 8mm to 22mm Milwaukee set. It's about $15 per wrench, but I think the quality is much better.
Scritto da: Scott
How did I get along without these?
Wow. What a great set of wrenches. I was given a smaller set of the non-flex head version of these wrenches several years ago as a gift and have used them so much, I decided to buy this larger, flex-head version. These things really let you get into tight spaces (can you say 4th Gen 4runner upper rear shock mount?) that sockets won't go and get bolts/nuts off fast without having to constantly reposition the wrench. I find myself using these wrenches more and more in places where I normally would have used a ratchet and socket. They are very strong, I've used them to remove and tighten things where I've really had to put some torque the fastener and they've held up well. At first I was concerned about the flex part being the weak link and breaking or spreading, but I haven't had any issues. The only problem I had was using the 19mm once when loosening a lug-nut (I was too lazy to get out my impact gun) and the ratcheting mechanism got "confused" and wouldn't ratchet, but a quick smack on concrete floor fixed it. It got the lug nut off and I haven't had any more problems. I know I've used some of the smaller size wrenches to torque things waaaay more than they should be, and wrenches haven't missed a beat. You do have to be a little careful when applying a lot of force to tighten/free a fastener to make sure that the head doesn't flex on you when you don't want it to or you may end up busting a knuckle (but hey, it hasn't been a productive weekend of wrench turning unless you have at least one bloody knuckle). There is a allen screw that serves as the flex pin that you can adjust to loosen/tighten the flex so you set it to what's comfortable for you. The "ridges" on one side of the wrench to help you feel if the wrench is tightening or loosening is just a marketing gimmick (at least in its current design). Yeah, they're there, but if you have gloves on you're not going to be able to feel them. And if you're like me, even if you could feel them, you're always going to give the wrench a quick turn to find out if it's tightening or loosening.....and you'll always have it backwards and have to flip it over! The plastic holder it comes in is nice and does a decent job of keeping the wrenches organized in your tool box, but I bought another wrench tray that stacks the wrenches a little closer together and doesn't "grip" on them to make getting them out just a little bit easier. So far, I'm very impressed with these wrenches. Seriously, if you don't own a set, buy some, they're that good, especially the flex head version. If you're on the fence, buy a smaller set and see how you like them and I have no doubt you'll be buying the larger sets in both SAE and Metric just like I did!
Scritto da: J. Woody
Good Set, Very Thick and Sturdy
I've owned a few GearWrench tools in the past, and have found them to always be a reliable and well built brand that have never broken on me. I'm pleased to say that this set has continued that fine tradition. I've used these to wrench on a few engines since buying them, and they've never bound up when applying some good torque to them (unlike Craftsman and Kobalt versions I've owned). The wrenches have a solid heft to them, and don't flex under strain. The tools are clearly marked with an arrow indicating rotation direction for quick reference use. The rachet heads aren't loose and floppy like some other manufacturer's, letting you set your tilt once and get to work, rather than fighting the tool to keep it aligned and engaged on a hard to reach nut. I had one that arrived loose, but it was easily corrected by turning the hex nut on the side and stiffened right up. The one drawback from this set is that it wasn't really designed with toolchests in mind. Firstly there's the tray. I own a large Craftsman box, but the length (front to back) of the tray with the built in handle made it too long to fit in a drawer. I ultimately had to ditch it and buy another set that would fit the drawer. The other problem is that the bulk of the wrenches on the tray means that this needs a slightly larger drawer in terms of depth than other wrench sets. The smaller wrenches do fine, but the bigger ones if they're on any sort of tray may be too tall for the roughly 2" deep drawers on some chests.
Scritto da: DrWCrane
Insanely expensive but great to have around
I use these frequently and they've saved me a lot of time and effort. My only complaint is that they're a little thicker than most wrenches, which sometimes limits their usefulness. I'd still never pay full price for them though, I got them much cheaper as an Amazon Warehouse Deal.
Scritto da: Ken Epp
Flex head
I am very happy with my purchase Gear wrench wrenches may not be the best but they work very good for me They are very affordable as well
Scritto da: Robert
Game changer!
The flex is not too loose so it’s not annoying to use.
Scritto da: Amazon Customer
Sturdy tool
Have quite a few gear wrenches time savers
Scritto da: xin song
Five Stars
Awesome

Súvisiace produkty

hot
Eastvolt 12-dielna sada račňových kľúčov s ohybnou hlavou, metrických 8 mm – 19 mm, súpravy kombinovaných kľúčov, chróm-vanádiová oceľ so skrinkou na náradie, EVHT1201
3.8/5

€ 94.61

Eastvolt 12-dielna sada račňových kľúčov s ohybnou hlavou, metrických 8 mm – 19 mm, súpravy kombinovaných kľúčov, chróm-vanádiová oceľ so skrinkou na náradie, EVHT1201
3.8/5

€ 94.61

hot
Williams 1199 štandardný kombinovaný kľúč, 3-palcový 3-palcový saténový chróm
3.9/5

€ 816.57

Williams 1199 štandardný kombinovaný kľúč, 3-palcový 3-palcový saténový chróm
3.9/5

€ 816.57

hot
Sada flexibilných račňových kľúčov Amazon Basics – metrická, 5-dielna sada metrických kľúčov
3.6/5

€ 53.45

Sada flexibilných račňových kľúčov Amazon Basics – metrická, 5-dielna sada metrických kľúčov
3.6/5

€ 53.45

hot
Očkoplochý kľúč TEKTON 1-1/8 palcový
3.8/5

€ 60.57

Očkoplochý kľúč TEKTON 1-1/8 palcový
3.8/5

€ 60.57

hot
Crescent 1/2 12-bodový kombinovaný kľúč - CCW5-05
3.8/5

€ 24.68

Crescent 1/2 12-bodový kombinovaný kľúč - CCW5-05
3.8/5

€ 24.68

hot
CRAFTSMAN kombinovaný kľúč, metrický, 7 mm (CMMT12081)
3.7/5

€ 23.83

CRAFTSMAN kombinovaný kľúč, metrický, 7 mm (CMMT12081)
3.7/5

€ 23.83

hot
TEKTON Súprava okombinovaných kľúčov, 30-dielna (1/4-1 in., 8-22 mm) - Držiak
3.9/5

€ 334.86

TEKTON Súprava okombinovaných kľúčov, 30-dielna (1/4-1 in., 8-22 mm) - Držiak
3.9/5

€ 334.86

hot
PREVODOVÝ KĽÚČ 20 ks. Račňový kombinovaný kľúč SAE/metrický - 35720A-02 Nový kľúč na balenie
3.8/5

€ 138.41

PREVODOVÝ KĽÚČ 20 ks. Račňový kombinovaný kľúč SAE/metrický - 35720A-02 Nový kľúč na balenie
3.8/5

€ 138.41

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array

Celkom:€ 0.00

Pozri košíkOdhlásiť sa

Kategórie

Všetky kategórie
Ponuka Kategórie Blízko Košík

Menu