POWERTEC 70189 Zberač prachu Y-fiting

Brand:POWERTEC

3.6/5

47.99

Predstavujeme Dust Collection Y-Fitting od POWERTEC. Táto armatúra skutočného typu „Y“ funguje ako rozdeľovač na zachytávanie prachu a je špeciálne navrhnutá tak, aby vám pomohla zmenšiť z 6-palcového portu (alebo hlavného vedenia) na 4 palce. Oproti 6-palcovému koncu má tento kužeľový rozdeľovač dvojité 4” hadicové vedenia – predstavuje multifunkčný nástroj, ktorý zvyšuje pracovný tok a zároveň efektívne pojme viacero prívodov hadíc. Či už tento konektor používate s vašimi vákuovými systémami alebo prenosnými dielenskými strojmi, je navrhnutý tak, aby zlepšil prúdenie vzduchu a účinnosť vášho systému. Je tiež navrhnutý tak, aby poskytoval bezpečné a spoľahlivé pripojenie k vašim portom. Prémiová kvalita Naše 6x4x4 Y-fiting je vyrobený z čierneho vysokokvalitného ABS plastu. Tento materiál je vyrobený pre náročné aplikácie a ponúka odolnosť s netoxickými vlastnosťami. Jeho konštrukcia šetrná k životnému prostrediu z neho robí nápad pre vnútorné a vonkajšie projekty a bežne ho používajú nadšenci a profesionálni drevári po celom svete. POWERTEC je popredný výrobca vysoko kvalitných drevoobrábacích nástrojov a príslušenstva, strojov a sortimentu originálnych náhradných dielov. Zaviazali sme sa prekonávať očakávania a zároveň prinášať do odvetvia najnovšie inovácie, technológie a vývoj produktov.

ŠPECIFIKÁCIE: 6-palcový nominálny koniec meria vonkajší priemer 6-23/64 palcov a 6-palcový vnútorný priemer. Obidva 4-palcové nominálne konce merajú vonkajší priemer 3-61/64 palcov. a vnútorný priemer 3-23/32 palcov – Uistite sa, že ste si overili kompatibilitu veľkosti rozhrania dielov. Upozorňujeme, že toto nie je navrhnuté na prácu s plánom 40 alebo inými plánmi PVC rúr. PRO BUILD: Vyrobené z vysoko kvalitného ABS plastového materiálu navrhnutého pre pevnosť a odolnosť – Schopné odolať prachu, úlomkom a iným abrazívam, ktoré bežne spôsobujú opotrebovanie. VLASTNOSTI: 6” otvor je samičí port a funguje so 6” vonkajším priemerom potrubia alebo inými samčími portami. Dva 4” OD porty na pripojenie hadicových vedení na zber prachu, rúrok a nástrojov, ako sú stolové píly, spojky, hoblíky a brúsky. FUNKCIA: Tento trojotvorový konektor vám umožňuje znížiť zo 6” portu (alebo hlavného vedenia) na 4-palcové vetvy. Môže sa použiť ako náhradná armatúra pre zberače prachu, ako je POWERTEC DC1512 alebo jednotky podobnej veľkosti. ZAHŔŇA: (1) Fiting systému zberu prachu typu Y.
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Brand ‎POWERTEC
Color Black
Color ‎Black
Connector Type Reducer
Connector Type ‎Reducer
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 239 ratings 4.5 out of 5 stars
Exterior Finish ABS
Exterior Finish ‎ABS
Included Components ‎Fitting
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 7 x 6.2 x 10 inches
Item Dimensions LxWxH ‎7 x 6.2 x 10 inches
Item model number ‎70189
Item Package Quantity ‎1
Item Weight ‎13.6 ounces
Manufacturer ‎POWERTEC
Material Acrylonitrile Butadiene Styrene
Material ‎Acrylonitrile Butadiene Styrene
Measurement System ‎Inch
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎70189
Product Dimensions ‎7 x 6.2 x 10 inches
Size 6 x 4 x 4"
Size ‎6 x 4 x 4"
Style ‎6" to 4" fitting

3.6

9 Review
5 Star
75
4 Star
13
3 Star
7
2 Star
3
1 Star
2

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Anna
Useful product, but a bit too narrow
This splitter was perfect for my niche need to connect 3 fan outlets into 1 roof vent. At first I used box store fittings which was clunky and expensive. I threw my contraption out and used this splitter instead. But I fitted one ending to a 4" ABS pipe from the box store. The fit wasn't great - I had to use several thick layers of cement to enlarge this splitter. Other people mention that it splits down the middle to two halves. I can see how this can happen, the two halves are melted together. So I reinforced it with ABS cement.
Scritto da: Julien
Perfect solid hardware that is holding up well
Perfect solid hardware that is holding up well
Scritto da: TrailTrackers
This does work... With some work
You need "volume" to make this fitting function correctly. Notice my system goes from 8" to 6" to this fitting. Also note that I have this fitting inserted into a 6" Tee; roughly 1 1/2" penetration. Now then, to make this fitting work... I used my 5" random orbital sander with 60 grit paper and EVENLY sanded around the outside of the 6" end until it would go into the Tee. When I reached 1 1/2" penetration I switched to 120 grit to finish it off. I could have glued this into place, but I chose to use duct tape instead because at some point I'll be moving into a larger shop. edit: I should mention 2 more things. The time it took to sand this fitting to size was only 15 mins; nothing to speak of imho. Also, I liked the way this turned out so much I ordered another one, which I just got today. I will have that one installed tomorrow. ;-))
Scritto da: Sam H.
Thinner than I expected, but works
Does the job
Scritto da: Strat Man
Another tool in the battle against dust.
If you're trying to use this wye fitting with schedule 40 PVC pipe (which is *not* the same size as DWV pipe), you may want to consider using a 6" flexible coupling - it's a piece of cake. I used this Fernco unit (https://www.amazon.com/gp/product/B001AU6S8C/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1) and no additional fiddling was needed for nice tight fit. As a bonus, it is a simple matter to adjust the orientation, if required.
Scritto da: nolan shinn
Great value
Did just what I needed at a fraction of the price of a comparable product from the original manufacturer
Scritto da: Atlanta customer
Dimensions are not accurate
The 4” ends are not actually 4”. They are smaller. This is important to me because smaller openings will cause pressure drop and reduced suction.
Scritto da: Hank W
Not a proper fit for my PSI dust collector
This y-fitting was a replacement for a broken fitting on my single stage PSI dust collector. The ID of the 6" portion was oversized, so I had to use black tape on the collector for a snug leak-free fit. Don't know if that is intentionally done by PowerTec or a flaw in manufacturing... but buyer beware.
Scritto da: dd
Great value
Using this "Y" for running two 4 inch bathroom fans to vent out one 6 inch wall vent.

Súvisiace produkty

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array