POWERTEC 70125 4-palcový adaptér na hadicu - ABS plastová rýchlospojka pre dielenské armatúry na zachytávanie prachu, čierna 1ks

Brand:POWERTEC

3.5/5

28.60

Veľký koniec meria 4-7/32 palcov O.D. a 3-31/32-palcový I.D. na pripojenie k 4-palcovému O.D. armatúry. Úzky koniec meria 4 palce O.D. a 3-49/64-palcový I.D. aby sa zmestili do 4-palcového PVC potrubia. Vyrobené z prvotriedneho, odolného ABS plastu s vysokou odolnosťou proti oderu. Navrhnuté na vytváranie spojení z vášho potrubia s množstvom armatúr. ŠPECIFIKÁCIE: Úzky koniec meria 4 palce O.D. a 3-49/64-palcový I.D. aby sa zmestili do 4-palcového PVC potrubia. Veľký koniec meria 4-7/32 palcov O.D. a 3-31/32-palcový I.D. na pripojenie k 4-palcovému O.D. armatúry. KONŠTRUKCIA: Tento adaptér na zachytávanie prachu s bezzávitovou celočiernou plastovou konštrukciou ABS bol navrhnutý tak, aby bol odolný a vyrobený tak, aby odolal opotrebovaniu, ktoré je často spojené s odsávaním prachu pri spracovaní dreva. VŠESTRANNÉ: Tento adaptér z potrubia na hadicu je ideálny pre každého profesionálneho drevára alebo systém na kontrolu prachu, ktorý využíva tvary Y, T, kolená, dýzy a iné armatúry. FUNKCIA: Umožňuje rýchle a jednoduché pripojenie z vášho potrubia k množstvu 4” fitingov na zachytávanie prachu – zbaví vás všetkých prác spojených s pripájaním, odpájaním alebo prepínaním z jedného stroja na druhý. OBSAHUJE: (1) Adaptér na hadicu (rýchlospojku).

Veľký koniec meria 4-7/32 palcov O.D. a 3-31/32-palcový I.D. na pripojenie k 4-palcovému O.D. armatúry. Úzky koniec meria 4 palce O.D. a 3-49/64-palcový I.D. aby sa zmestili do 4-palcového PVC potrubia. Vyrobené z prvotriedneho, odolného ABS plastu s vysokou odolnosťou proti oderu. Navrhnuté na vytváranie spojení z vášho potrubia s množstvom armatúr. ŠPECIFIKÁCIE: Úzky koniec meria 4 palce O.D. a 3-49/64-palcový I.D. aby sa zmestili do 4-palcového PVC potrubia. Veľký koniec meria 4-7/32 palcov O.D. a 3-31/32-palcový I.D. na pripojenie k 4-palcovému O.D. armatúry. KONŠTRUKCIA: Tento adaptér na zachytávanie prachu s bezzávitovou celočiernou plastovou konštrukciou ABS bol navrhnutý tak, aby bol odolný a vyrobený tak, aby odolal opotrebovaniu, ktoré je často spojené s odsávaním prachu pri spracovaní dreva. VŠESTRANNÉ: Tento adaptér z potrubia na hadicu je ideálny pre každého profesionálneho drevára alebo systém na kontrolu prachu, ktorý využíva tvary Y, T, kolená, dýzy a iné armatúry. FUNKCIA: Umožňuje rýchle a jednoduché pripojenie z vášho potrubia k množstvu 4” fitingov na zachytávanie prachu – zbaví vás všetkých prác spojených s pripájaním, odpájaním alebo prepínaním z jedného stroja na druhý. OBSAHUJE: (1) Adaptér na hadicu (rýchlospojku).
Brand POWERTEC
Color Black
Connector Type Elbow
Exterior Finish ABS
Item Dimensions LxWxH 4.6 x 4.4 x 4 inches
Item Weight 0.15 Pounds
Material Plastic, Acrylonitrile Butadiene Styrene
Number Of Pieces 1
Size 4 Inch
Thread Size 4 inch

3.5

12 Review
5 Star
72
4 Star
14
3 Star
7
2 Star
2
1 Star
4

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Sytze
Fits DWV SDR35 couplings
This does not slip directly onto green 4" DWV SDR35 / ASTM D 1784/ ASTM D 2729 pipe. It however does fit really nicely into the couplings used for those pipes and it allows for the connection of a 4" dust hose which doesn't fit directly onto a 4" DWV pipe.
Scritto da: Tonya Mansfield
Lowes/Home Depot white 4" sewer pipe.
Knocked 2 stars for the price compared to a 4" sewer pipe coupler. You can use this in several ways. I put the narrow end in my 4" coiled hose to move from machine to machine. The wide end fits into any 4" sewer pipe elbow, Y fitting, or coupler, NOT the bare sewer pipe. However, one end of the sewer pipe comes flared to couple with another 4" pipe. So many options with sewer pipe. It's cheaper and much more efficient than running coiled hose everywhere, and much cheaper than all the proprietary options. I hate blast gates and think they add uneeded complications and inefficiencies in a small shop. Believe it or not, but I am indeed just 1 person and can only run one machine at a time...
Scritto da: rbrown
Served its purpose
Straight forward... does what it's supposed to do.
Scritto da: Freeheel
Worked on my drum sander
This worked great as a quick disconnect for the dust hose on my Jet 16-32 drum sander.
Scritto da: Andy Mitchell
Works with PowerTEC pieces - not much else?
Thought this would make quick connections between a few of my different tools with 4" vacuum ports. Upgrading my 2 1/2" vacuum system so I'm learnign what fits together with what. This seems to mate with other PowerTec components directly. Everything else requires a connector (for the connector). :-) Caveat Emptor! Other than that, it's a short, hard plastic tube. It excels at being that.
Scritto da: Annie
It works if your other materials are correct.
PVC sewer line comes in two thicknesses. The common stuff is .090" thick and normally white. There is also a thicker type, often green in color, that has a .127" wall thickness. If your PVC (NOT ABS) pipe is the thinner version the smaller end of the adapter will fit into sewer pipe as described. I was not as fortunate with the other end fitting my hose. I only have one unknown brand of hose but it fits the factory dust port on my table saw as well as the 4" end of a Powertec 70136 4"x2-1/2" Reducer so I have to assume my hose has a fairly standard ID. The reducer OD is 3-61/64" and is a close slip fit to the inside of the big end of the 70125 adapter so I do not see how the big end is supposed to fit a 4" hose. The big end of the 70125 adapter is 4-7/32" so it is far too large to fit a 4" hose. Fortunately, the bigger end is close to the size of the ID of 4" PVC couplings and ells. I made it fit tightly by applying a single layer of blue painter's tape to the adapter and attached the hose to the smaller end with a hose clamp. Every joint in my dust collection system is fitted with blue painter's tape so it can be altered as needed. I would rate the item "not as described" but saw still able to make it useful.
Scritto da: Kate Abbas
does not fit
still lose on any 2.5 inch tools. waste of my and betting there is better options out there. look elsewhere if you like it tight.
Scritto da: stevemaster
Fit PERFECT (for my application)
Tired of the 4” dust port from my DeWalt Planer leaving the 4” hose right in the way of the out feed table. This adapter with a 4” 45 degree street elbow was the secret sauce. Problem solved.
Scritto da: Don Reichert
Don't fit together
Nothing fit together, I ordered several fittings and y's etc. I order an adapter and you would think it would fit onto the Y, or the Gate, but NO everything are the same size, so you need a coupler, but they don't sell a coupler, so now I either need to use a 4" piece of flex hose, (which makes the joint weaker) or I will need to design and print my own with my 3d printer.
Scritto da: RD Elson
Fits and works great.
Fits and works great.
Scritto da: Dale Clarke
Fit inside 4" abs pipe
Pleased
Scritto da: james allain
Four Stars
did the job

Súvisiace produkty

hot
NIBCO 5817 4 Krytka náboja ABS DWV
3.5/5

€ 35.15

NIBCO 5817 4 Krytka náboja ABS DWV
3.5/5

€ 35.15

hot
Vodná panvica Emberglo 140210 Es5
0.1/5

€ 129.85

Vodná panvica Emberglo 140210 Es5
0.1/5

€ 129.85

hot
Armatúra NDS 6P06, 6 palcov, biela
3.5/5

€ 27.80

Armatúra NDS 6P06, 6 palcov, biela
3.5/5

€ 27.80

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array