Orezávač výfukov a koncoviek - 2031DD

Name: Orezávač výfukov a koncoviek - 2031DD
Brand: GEARWRENCH
SKU: 0787721799511
Price: 79.45 EUR
Availability: InStock

Brand:GEARWRENCH

3.4/5

€
79.45

Od nášho začiatku boli špeciálne nástroje pre automobilový priemysel GEARWRENCH poháňané inováciami. Od nášho prvého špeciálneho nástroja, zdvíhača ventilových pružín Model-T, až po náš najnovší račňový sťahovák, vybudovali sme si našu reputáciu nástrojmi, ktoré uľahčujú náročné práce. Väčšina našich produktov bola vylepšená o nové vylepšené funkcie, ako sú rukoväte z dvoch materiálov navrhnuté pre pohodlnejšie uchopenie alebo dvojité namáčané rukoväte na kliešťach, ktoré poskytujú viac odpruženia pre vaše ruky. Špeciálne automobilové náradie GEARWRENCH sa hrdo vyrába z tých najkvalitnejších komponentov podľa najprísnejších výrobných smerníc. Vyrobené na každodenné použitie – so zárukou na celý život. Lepšie nástroje znamenajú jednoduchšiu a efektívnejšiu prácu, takže neustále vyhodnocujeme trendy v automobilovom inžinierstve, čo nám umožňuje neustále zlepšovať a zdokonaľovať naše nástroje, aby lepšie sadli do rúk profesionálov. Preto sú prvou voľbou pre tisíce automobilových technikov na celom svete.

Suma

Pridať do košíka Kúpte teraz

EAN: 0787721799511

Kategórie Nástroje a domáce potreby, Elektrické a ručné náradie, Ručné náradie, Strihače, štiepačky rúr,

Udržujte dobre naolejované. Nereže dvojstenné rúry. Opraviteľný nástroj funguje na ťažko dostupných miestach. Pätnásť čepelí efektívne reže potrubie, takže na úplný rez je potrebné len otočenie o 100 stupňov. Odrežte rúry s priemerom 3/4 až 3 a 19 mm až 76 mm v priemere.

Batteries Included?	‎No
Batteries Required?	‎No
Country of Origin	‎Taiwan
Customer Reviews	4.4 4.4 out of 5 stars 983 ratings 4.4 out of 5 stars
Included Components	‎
Is Discontinued By Manufacturer	‎No
Item model number	‎2031DD
Item Package Quantity	‎1
Item Weight	‎1.16 pounds
Manufacturer	‎GEARWRENCH
Material	‎Alloy Steel
Measurement System	‎Inch
Part Number	‎2031DD
Power Source	‎Hand Powered
Product Dimensions	‎13.25 x 7.25 x 12 inches
Usage	‎Professional
Warranty Description	‎K-D Tools

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Daryl Pacific

Incredibly easy

I recently purchased the GEARWRENCH Exhaust and Tailpipe Cutter to replace the rusted-out muffler on my car, and I have to say, it exceeded my expectations. The tool is well-built, with a sturdy frame and comfortable grip that allowed me to make precise cuts without straining my hands. The blade was sharp and easily cut through the tough metal, saving me time and frustration. The adjustable chain made it easy to fit the cutter to the size of the pipe, and the ratcheting action made the process smooth and effortless. Overall, I would highly recommend this tool to anyone in need of a reliable and efficient exhaust and tailpipe cutter.

Scritto da: Austin

Cuts exhaust

It cuts exhaust really straight so it’s easier to but weld.

Scritto da: Johnny

Worked GREAT and left CLEAN cuts!

The media could not be loaded. Worked GREAT for cutting off my stock exhaust and left CLEAN cuts!

Scritto da: Andrew

One major problem

So this actually cuts pretty easily, I was pleasantly surprised. As a quick tip, use long zip ties around the handle to squeeze it, tighten as you go. Now to major problem I ran into is that it doesn’t cut evenly so I was left with a small part of my exhaust hanging on. If you’re using this to cut pipe you can access from every side you won’t have any problems. I can’t speak to longevity of the tool because I only had to cut two pipes.

Scritto da: L

They work.

I am a profeession auto tech. And i use these as part of a recall we are doing at the dealer, the manufacture instruced to use this type of tool. The shop has gone through numerous sets, and its because the guys are not using them correctly. Get a good cut going first, so make sure you are in the same spot, go slow, if you go fast and hard, you will end up with 2 different cuts and the little blades will skip and eventually chip, and make this tool hard to use/ useless.

Scritto da: Sean S Manley

Easy to use...Unfortunately the wheels went dull before the pipe was cut.

When I first started to do the cut, I was impressed by how easy it was. Then the wheels started to get dull, and I couldn't finish the cut. Had to squeeze my jigsaw in the area to finish the exhaust cut. This tool went in the trash can shortly after that.

Scritto da: Zack

Leaves nice clean cut

Perfect to use when your straight piping your car

Scritto da: Skaizun

Good for non-exhaust pipes

I tried this on my 2" diameter muffler pipe, and found that it couldn't even "catch" on the closest cutting blade (i.e., ideally, you open the wrench, then close it on the closest cutting blade (i.e., each blade has a "pin" which "mounts" on the wrench)). So, I was forced to use the next closest blade, which wouldn't close on the pipe, even though I squeezed it until my palms felt as if they were going to pop off my hands! The best I could do was merely score the surface of the pipe, and it wasn't an even cut at that. The biggest problem is that the evenly-spaced, round, "blades" don't allow for between-sized pipes, such as, apparently, my muffler pipe. In that regard, it was useless. However, after that failure, I tried it on some other, narrower, household pipes and rods that I needed to cut down to size for recycling, and it did a superb job. Once the wrench clamps down on the pipe, it "bites" right into and through the stainless steel pipe like butter (even though it says it won't work on stainless steel!), and twisting/turning the wrench finishes the job in just one or two quarter turns, depending on the thickness of the pipe/rod. So, it worked great on "easy" stuff (i.e., things I could have used a hacksaw or drill sawblade on), but not on the very thing it, allegedly, was meant for. Had it worked on its intended target, it would have been well-worth the price; since it didn't, and since I already had an alternative for the other uses, it wasn't.

Scritto da: ckhm65284

It is what it is

It's a really nice pipe cutter

Scritto da: Henri Robinson

Quality pieces of kit

Did the job perfect, thank you

Scritto da: Mihai b.

Good tool

Nice one

Scritto da: Amazon Customer

Worker perfectly for 2019 Golf R resonator delete

Make sure the handles are open as wide as possible before you hook the chain on, so that you can get a good tight fit when you squeeze them together. Then just move it backwards and forwards increasing the pressure till it cut through. Don't force it take your time, did not take long maybe a minute. I was a bit worried because of some of the review but if you use the tool correctly it works perfectly.

Scritto da: Mr. X

This tool is like a scalpel for exhaust pipes

Works extremely well and makes exhaust pipe cutting a lot more convenient and safer. I used to dread cutting exhaust with a grinder and/or a metal saw, as there was never enough room to fit the tool and the final cut was always jagged and at an angle... plus all the damn sparks flying all over when using a grinder! This tool is like a scalpel for exhaust pipes... very impressed! Have done 6-7 pipe cuts so far with it in different thicknesses (different cars/trucks) and it has performed like a champ. The finished edge once the cut is done is always straight and looks like factory cut pipe. Note: in order to preserve the cutting edges on the chain blades a little longer, I've read its' recommended to spray the blades and the pipe you're cutting with some lube/oil for a smoother operation. This was how I did it and it worked very well. :)