Oregon 14-palcová štartovacia súprava PowerSharp s lištou, brúskou a 52 hnacou reťazou PowerSharp, 3/8 nízky profil, 0,050, prenosný nástroj na ostrenie reťazových píl (541652)

Brand:Oregon

3.2/5

96.35

Pre rýchle a efektívne ostrenie reťaze reťazovej píly si vyberte štartovaciu súpravu PowerSharp Sharpener od spoločnosti Oregon. Ľahko použiteľná súprava na ostrenie vám umožňuje rýchlo ostriť na píle bez toho, aby ste museli sťahovať reťaz – šetrí vám čas na poli. Ľahká, trojdielna sada obsahuje vodiacu lištu navrhnutú pre PowerSharp, reťaz PowerSharp a brúsku PowerSharp na uchytenie lišty. Prejdite z nudného na ostrý už za tri sekundy. Užite si vysoko prenosné, presné a ultra rýchle ostrenie v priebehu niekoľkých sekúnd. Brúska PowerSharp sa môže používať iba s lištami a reťazami Oregon PowerSharp. • Sada na ostrenie reťazovej píly Oregon – používa 52 článkovú reťaz PowerSharp (PS52) • Rozteč/rozteč: 3/8 nízky profil / 0,050 • Dĺžka lišty: 14 palcov (35 cm) • Montáž na chvost: A041 • Rýchla, ľahko použiteľná, prenosná, presné a húževnaté • Ostrenie na píle už za 3 sekundy • Dostupné v širokej škále veľkostí pre váš konkrétny model • Univerzálny ostriaci systém pre rôzne značky a modely • Brúsny kameň je súčasťou komba • Kompatibilný s mnohými modelmi od značiek: Craftsman, Cub Cadet, Dolmar, Echo, Efco, Homelite, Husqvarna, John Deere, Jonsered, Makita, Olympyk (Oleo-Mac), Poulan/Poulan Pro, Power Pruner/Echo Power Pruner, Stihl, Redmax, Ryobi. Identifikácia pílovej reťaze: Vždy si pozrite číslo vyrazené na hnacom článku vašej starej reťaze, aby ste si zaistili správny rozchod a stúpanie, alebo si pozrite používateľskú príručku. Budete tiež potrebovať poznať typ a poradie vašej reťazovej píly, aby ste si objednali správny diel, ktorý bude pasovať na vašu reťaz píly. • Ukazovateľ reťaze je hrúbka hnacieho článku v mieste, kde zapadá do drážky vodiacej lišty, pričom sa zhoduje s mierkou vodiacej lišty. • Rozstup reťaze je veľkosť reťaze a je definovaná ako vzdialenosť medzi akýmikoľvek tromi po sebe idúcimi nitmi delená dvomi. Rozstup je dôležitý, pretože hnacie ozubené koleso musí mať rovnaký rozstup ako reťaz a prípadne ozubené koleso s nosom lišty.

Nie sú k dispozícii žiadne jednotky
Ideálne pre profesionálov alebo majiteľov domov: Vhodné pre komerčných používateľov aj pre domácich majstrov. Obsahuje vodiacu lištu navrhnutú pre PowerSharp, reťaz a brúsku PowerSharp s držiakom na lištu s brúsnym kameňom. Oregon prémiová brúska reťazovej píly PowerSharp: Pre reťazové píly s lištou 14 (35 cm); súčasťou dodávky je reťaz s 52 hnacími článkami, nízkoprofilovým rozstupom 3/8 palca a reťazou PowerSharp s rozchodom 0,050 palca (1,3 mm). Vymeňte lištu a reťaz za štartovaciu sadu PowerSharp. Potom pomocou brúsky naostrite reťaz na píle v priebehu niekoľkých sekúnd. Brúska je určená len na použitie s lištami a reťazami Oregon PowerSharp. Hodí sa pre mnoho populárnych modelov reťazových píl so 14 barmi, vrátane, ale nie výlučne, Echo CS310 a Homelite ZR43100. Obsahuje 1 x vodiacu lištu, 1 x reťaz PowerSharp a 1 x brúsku. Nabrúsi vašu reťaz na píle v priebehu niekoľkých sekúnd. Rýchle, jednoduché, prenosné, presné, odolné: Ultra rýchle ostrenie reťaze v ľahkom nástroji. Brúsny kameň je súčasťou komba.
Brand Oregon
Chain Type Low Profile
Compatibility Options For saw sizes up to 42 cc
Country of Origin USA
Customer Reviews 4.2 4.2 out of 5 stars 226 ratings 4.2 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Length 26.25 inches
Item model number 541652
Item Weight 2.5 pounds
Manufacturer Oregon Tool
Product Dimensions 26.25 x 1.5 x 5.37 inches

3.2

13 Review
5 Star
65
4 Star
9
3 Star
13
2 Star
6
1 Star
6

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: B. Newman
GREAT alternative for those that hate to sharpen chains.
The Oregon PowerSharp Bar/Chain/Sharpener system is great for people that don't like to sharpen chains. I would probably get motivated on chain sharpening, if i used a chainsaw daily or weekly. But for occasional chainsaw usage, the PowerSharp system works out very well.
Scritto da: Gary W.
Top only
Stone will only dress the top of the blade and not the cutting edge.
Scritto da: Park Manager
A+ Super Awesome
This is the future of chainsaw sharpening. It's so easy and only takes 3 seconds to sharpen your chain. You need to replace the chain and diamond stone together, but the chain has a lot of meat on it. The yellow sharpener will last forever, and the diamond stone inside is replaceable. The Oregon PowerSharp system is by far the fastest and easiest way to sharpen your chan, and file down your depth gauges at the same time. I'll never go back to manual chain sharpening. I've been using the PowerSharp system for a few years, and it is the best way to keep your chain razor sharp--period. Best practices is never hit dirt or earth with your chain, and you won't need to sharpen your chain that often. But if you accidentally do hit dirt, 3 seconds in the PowerSharp system will make the chain as sharp as it was from the factory. PowerSharp is a game changer, and I'll never go back to manual files, or grinders ever again. PowerSharp is magnitudes easier and faster. I upgraded all my chainsaws to the PowerSharp system. This system requires the PowerSharp chain with the inverted chain bevel that is included in this kit. Always replace the diamond stone and chain together. Works on most Oregon chainsaw bars. The yellow sharpening system just needs to attach to the hole in the tip of the bar. Plunge the bar into the stone in the yellow part at full speed, and it sharpens the chain in 3 seconds. Trust me. You'll never manually file a chain ever again after using the Oregon PowerSharp system.
Scritto da: Chris M.
Big time-saver, negligible compromise in cutting efficiency to acheive it
At first I was concerned about a loss in blade efficiency in this new design (surely the inward-only sharpenable blades made their sacrifice for a reason, right?). This was especially on my mind because I use an electric Ryobi 40v (brushless) chainsaw where efficiency matters. Happily though, use of the chain put my concerns aside. The speed it cuts is equal to a high quality normal chain, and the extra drag on the motor was much less than I had expected (though there is a slight but detectable difference in the motor sound and amount of work per charge). The efficiency difference really is easily worth my time or money in new blades, services, or sharpening. Ultimately, because I will be keeping the blade sharp more often, the efficiency is superior (just not right out of the box). Another way I can tell that this is a good chain, is by the shavings it produces relative to other quality chains when new. These are all sizeable and whole without any evidence of over-bite (though I think it is a tad more than the equivalent standard type chain), for as long as the blade remains sharp (which by my standards is still longer than 5 battery charges). If you don't already buy quality chains, this will be the best chain you have owned anyway.
Scritto da: Biff44
Works pretty well
I was-pleasantly surprised that this actually works. I have an EGO chain saw that i cut brush and other dirty wood with. The chain was dulling too quickly. Switched to this sharpener, and was cutting thru some stumps, and it kept me going. You have to change to the bar provided, as the sharpener would not fit the ego bar ( hole too small). I like it
Scritto da: Vincent C. Peterson
Best Yet.
Best product I have purchased in a long time. Work perfectly.
Scritto da: Mike D
the seller is AWESOME. Very fast delivery
First thing first, the seller is AWESOME. Very fast delivery. No problems there. Now onto the product --- it's basically junk. My father has been a small engine mechanic for the better part of 40 years. He's seen everything. He's seen the gimmicks, and this is exactly what it is. If you look at this chain, the teeth are actually pitched up a bit to allow the sharpening stone to grind them down a bit to sharpen it. This actually works well, but here are my words of caution: If you only cut wood (and you know you won't hit a rock, nail, or anything that isn't soft like wood), this will probably work OK. When I tested a brand new normal chain to this chain, I could tell the difference, but it wasn't anything unbearable. For the ease of sharpening its a decent compromise. But if you hit anything else with it, there is a very real possibility you knock the teeth right off this chain. I know, because it happened to me. I hit a nail in a 2x4 and the chain became a pile of useless metal. To sum it up ... this is a light duty chain for very light duty work. Hitting anything but wood is basically a death sentence to this chain.
Scritto da: My Eyes Are Up Here!
For the rest of my life I will only buy a chainsaw that fits this product
I'm using this on my 40v Ryobi battery chainsaw. I'm never going to sharpen a chain the old way again. If this saw dies before me, I'll make sure that whatever I replace it with can take a self sharpening system like this. Not only is this fast (3 seconds) but it gets the chain way sharper than I could with a file. Whoever invented this system needs to win the Nobel prize for...uh... forestry or whatever category this fits into.
Scritto da: SI 4248US Guy
Great concept but not for rookies.
High kickback potential, rookies leave the sharpener on at all times and you'll be safe, haha. Cuts like a full chisel pro chain. Great for repetitive simple cuts such as cutting firewood bucks right before splitting. I wouldn't recommend taking it into the bush or working near the ground. Don't try anything that might damage any individual teeth or you'll have a heck of a time until they've all worn down to the same ones you damaged. Chains are twice the price but seem to be worth it for the convenience (in the right application)
Scritto da: Wesley Rideout
Good Product
I have not installed it yet, but bought it for a new chainsaw. I had one for years on a saw I have given to my son and found it a good product. When my chain got dull it just took a couple minutes to get going again with a chain that cut like new
Scritto da: James
Chain keeps coming off
Thought it was a good buy at first, but the chain constantly jumps off the bar and is unsafe.
Scritto da: jean-pierre poulin
Très satisfait
Rapidité d’expédition Exactitude du produit
Scritto da: Jeremy snook
and is super sharp. will be buying again
the chain and bar worked perfectly. and is super sharp. will be buying again.

Súvisiace produkty

hot
Oregon 791-558 Žací nôž, čierny
0.1/5

€ 45.63

Oregon 791-558 Žací nôž, čierny
0.1/5

€ 45.63

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array