MAGID ANSI A5 D-ROC AeroDex 18-gauge pracovné rukavice, 12 párov, penová nitrilová vrstva, veľkosť 10/XL, modrá 10/XL 12 párov

Name: MAGID ANSI A5 D-ROC AeroDex 18-gauge pracovné rukavice, 12 párov, penová nitrilová vrstva, veľkosť 10/XL, modrá 10/XL 12 párov
Brand: MAGID
Price: 399.49 EUR
Availability: InStock

Brand:MAGID

3.5/5

€
399.49

POPIS PRODUKTU Šesťhranné skrutky sa používajú na priame upevnenie do drevených povrchov. Používajú sa s ochranným štítom a skrutky s oneskorením môžu byť použité v murárskych aplikáciách. Šesťhranná hlava je šesťhranná a ideálna pre jednoduchú jazdu a rýchlu inštaláciu. Závity na skrutkách s oneskorením sú navrhnuté tak, aby sa zapustili do dreva a nespoliehali sa na maticu na zaistenie spojenia. OD VÝROBCU Šesťhranné skrutky sa používajú na priame upevnenie do drevených povrchov. Používajú sa s ochranným štítom a skrutky s oneskorením možno použiť v murárskych aplikáciách. Šesťhranná hlava je šesťhranná a ideálna pre jednoduchú jazdu a rýchlu inštaláciu. Závity na skrutkách s oneskorením sú navrhnuté tak, aby sa zapustili do dreva a nespoliehali sa na maticu na zaistenie spojenia.

Nie sú k dispozícii žiadne jednotky

EAN:

Kategórie Nástroje a domáce potreby, Bezpečnosť a ochrana, osobné ochranné prostriedky, Ochrana rúk a paží, Lab, Bezpečnostné a pracovné rukavice, Rukavice na bezpečné práce,

Farebne označené zamračené: Zamračené je farebne označené tak, aby vizuálne indikovalo veľkosť a úroveň strihu; Zamračené má dvojitú funkciu, aby sa zabránilo rozstrapkaniu a zlepšila sa životnosť. Kompatibilné s dotykovou obrazovkou: Končeky prstov kompatibilné s dotykovou obrazovkou fungujú so smartfónmi, tabletmi a ďalšími zariadeniami; Zlepšuje súlad pracovníkov a udržiava pracovníkov v spojení. Penový nitrilový povlak dlane: Prémiový ultratenký penový nitrilový povlak pomáha odvádzať olej pre lepšiu priľnavosť pri aplikáciách s ľahkým olejom. 18-gauge AeroDex škrupina: Ľahká 18-gauge škrupina poskytuje bezkonkurenčnú obratnosť a hmatovú citlivosť; Flexibilná škrupina umožňuje nositeľom ľahko uchopiť malé predmety. Odolnosť proti prerezaniu ANSI A5: Priadza vyvinutá spoločnosťou AeroDex je ľahká a chladná so spoľahlivou odolnosťou proti prerezaniu.

Brand	MAGID
Color	Blue
Country of Origin	China
Department	Unisex-adult
Manufacturer	MAGID
Material	High Performance Polyethylene
Product Dimensions	8 x 4 x 5 inches; 1.3 Pounds
Size	10/XL
Special Feature	Lightweight, Abrasion Resistant, Palm Coated, Cut Resistant, Breathable

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Jon Bryant

High dexterity gloves

Not sure about the cut resistance but these are my favorite work gloves. Excellent grip and dexterity. Get a size smaller so they will fit tightly.

Scritto da: David

Too thin

These are way too thin to have a true rating of A5. Im a machinist and work with razor sharp metal chips. My previous pair I bought were A4's and they were 3 times as thick. That is what my rating is based on. Being thiner they are more comfortable though. I just don't trust the rating.

Scritto da: Chelsea

Super thin

Are these legit level 5!? Feels more like rubber dish gloves.

Scritto da: Eunice Berry

Recommended

Good touch sense and comfortable

Scritto da: Mari

Grippy and durable

These gloves are awesome the grips are very durable. They protect my hands from getting scratched and cut I handle boxes all day.

Scritto da: AKC

Great Added Protection While Working With Glass

I ordered these work gloves for use while making stained glass. They provide some extra protection from the sharp edges of the glass panels during the rough cut and grinding phase, and offer an extra layer to protect from accidental solder pops while I’m soldering. They are a bit thinner than the gloves I normally use for this task, but so far they’ve held up decently well. I like the grippy surface that helps me stay in control of the glass even when the cutting oil or the water from the grinder makes a piece a bit slippery. I ordered the small, which is what I generally order for gloves like these, and while these fit, they are slightly loose -- I might consider ordering an extra small next time to see if they are a better fit. Only time will tell how long they hold up to the glasswork, but so far so good. They’ve made it through a couple projects now without obvious problems. Although they are a bit thinner than my normal gloves, I do like the extra dexterity that offers, so if they continue to hold up, I will definitely be ordering more.

Scritto da: John TK

Safety and comfort -- a welcome combination

The ANSI spec on gloves like these ranges from 1 to 9. These are rated at 5, and I believe that puts them right in the sweet spot for your average homeowner/DIY-er. They have more stretch than any other cut resistant gloves I've used but they're no struggle to take on or off. Arrival timing was great in that I was doing some machine maintenance: removing/sharpening blades, deck cleaning, etc. These are thin enough to give you dexterity but substantial enough not to sacrifice confidence. Just please remember: "cut resistant" and "cut proof" are NOT the same thing. These are cut resistant (I suppose cut proof would require some kind of Arthurian chain mail -- not ideal for handling the fiddly bits.) So these gloves and a touch of common sense should keep you bandage free and productive.

Scritto da: jb

Great glove. Good balance between protection and flexibility.

The glove fits a bit big for XXL size. I have large hands and usually use an XXL size glove. I like a thinner glove to fit tighter to allow for more dexterity. Cut resistance is better than a regular dipped glove. Seems like a good quality dipped glove. This glove does not provide puncture resistance. Liquids do go right through the glove if hitting the back of the glove.