Koncová bója Taylor Made Tuff, biela (9) – Flexibilná, pevná, vinylová bója námornej kvality pre 25- až 40-stopové člny – Ľahko použiteľná, Trivalve™ sa nafukuje so štandardnou guľôčkovou pumpou – 2020108079 Farba – Biela Priemer 9

Name: Koncová bója Taylor Made Tuff, biela (9) – Flexibilná, pevná, vinylová bója námornej kvality pre 25- až 40-stopové člny – Ľahko použiteľná, Trivalve™ sa nafukuje so štandardnou guľôčkovou pumpou – 2020108079 Farba – Biela Priemer 9
Brand: TAYLOR MADE PRODUCTS
SKU: 0040011310408
Price: 88.43 EUR
Availability: InStock

Brand:TAYLOR MADE PRODUCTS

3.1/5

€
88.43

Robustná konštrukcia, ktorá spĺňa náročné požiadavky komerčného námorného priemyslu. Najpresnejším spôsobom, ako vybrať ten správny blatník pre vašu loď, je preskúmať miesto v doku, aby ste zistili, aký blatník sa používa pre rovnakú veľkosť a hmotnosť lode. pokiaľ ide o rozmery a množstvá blatníkov a použite ich ako smernicu.

Suma

Pridať do košíka Kúpte teraz

EAN: 0040011310408

Kategórie Šport a outdoor, Šport a fitness, Jachting a plachtenie, Člny a vybavenie, Prístroje na kotvenie a dokovanie, Morské bóje,

Blatníky Tuff End sa vyznačujú bezšvovou konštrukciou, najsilnejšou v tomto odvetví. Vyrobené z flexibilného a odolného vinylu morskej kvality. Trojventil pre ľahké nafukovanie futbalovou ihlou alebo kompresorom. Vstrekované konce testované na pevnosť v ťahu 2000 psi. Disponuje veľkými otvormi pre šnúry, ktoré pojmú väčšinu lán a štandardných okov. Vyrobené z flexibilného a odolného vinylu morskej kvality. Trojventil pre ľahké nafukovanie futbalovou ihlou alebo kompresorom. Vstrekované konce testované na pevnosť v ťahu 2000 psi. Disponuje veľkými otvormi pre šnúry, ktoré pojmú väčšinu lán a štandardných okov. Blatníky Tuff End sa vyznačujú bezšvovou jednodielnou konštrukciou, najsilnejšou v tomto odvetví. Vyrobené z flexibilného a odolného vinylu morskej kvality. Trojventil pre ľahké nafukovanie futbalovou ihlou alebo kompresorom. Vstrekované konce testované na pevnosť v ťahu 2000 psi, s veľkými otvormi pre šnúru, aby sa zmestili na väčšinu lán a okov. Vyrobené v USA pre náročné námorné aplikácie. Odporúčaná veľkosť lode - 25 až 40 stôp.

Country of Origin	China
Customer Reviews	4.1 4.1 out of 5 stars 74 ratings 4.1 out of 5 stars
Domestic Shipping	Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	No
Item model number	1140
Item Weight	1.9 pounds
Manufacturer	Taylor Made
Product Dimensions	50 x 34 x 34 inches
Release date	October 1, 2006

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Albert W. Thomas

Challenging to start inflation.

When delivered it's flat and needs inflating. The inflation valve is hard to reach in the fully deflated position. I was using the needle type method using a bike floor pump for inflating.Once you get some air the inside the fender it's much easier to inflate to full. Still when done, it shows crease marks from being stored flat. Hopefully those will come out over time. Seems as tough as any other Taylor Made fenders.

Scritto da: Carolshopper

Use in fron of boat dock at lake home

They have lasted much longer than expected!!!

Scritto da: Doc

It’s about the valves…they leak.

I loved other Taylor Made products (like their boat cover) but the valve sucks on these and one leaks at the seam also. I’d return it but need it even if deflated. Not good. Look elsewhere

Scritto da: mike conway

USA and Great Product

Fourth one I have bought. Love this product and the manufacturer.

Scritto da: Jesus Ramos

Defective

Seam didn’t seal. Will be returning this item ASAP.

Scritto da: MikeInWeston

Inflates easily

I didn't have to, but I took it apart just to see what all the shooting was about inflating this ball. I used a regular bicycle pump with a basketball needle. It was not necessary to use a Phillips screwdriver to unscrew the pin, and my seven year old did the hard work pumping. This is now in our leg holding up our irrigation pipe.

Scritto da: Mike

I returned and received the another one which work fine. No surprises

I ordered two, second one would not hold air. I returned and received the another one which work fine. No surprises.

Scritto da: holden shelton

Good for novice strikers. Not good for anyone who punches with above average power. It will crack.

Good for novice strikers. If you have above average power this bag will crack/leak. Recommend only throwing technical speed strikes . Also WRAP YOUR HANDS. This bag will destroy your wrists.

Scritto da: GiftMaster

To use for boxing, get a brass hose nozzle to fill it

I was going to give this 1 star, because it doesn't come with a nozzle to fill it with water. However, since it isn't meant for boxing (what I use it for), I'm giving it 4 stars. The plug is kind of difficult to unscrew and screw back in. With that said, I was able to (finally) mount it in my basement, and it works better than expected as a punching bag, given that I was only able to fill it about 75%.