KOHLER K-1150464-96 Sada pántov, sušienka, 7,05 l x 3 W Balenie po 1 kuse

Name: KOHLER K-1150464-96 Sada pántov, sušienka, 7,05 l x 3 W Balenie po 1 kuse
Brand: Kohler
SKU: 0650531964861
Price: 50.64 EUR
Availability: InStock

Brand:Kohler

3.6/5

€
50.64

KLASICKÉ ZVONKY PRE KAŽDÝ DOMOV Náš kovania Newhouse s okrúhlym osvetleným tlačidlom zvončeka na dverách je rozumný a elegantný kus zdvorilostnej technológie, ktorý dopĺňa a zachováva štýl vašej domácej fasády. Naše osvetlené zvončekové tlačidlo používa jednoduchý, okrúhly, klasický dizajn s čírym lemom, ktorý sa inštaluje v jednej rovine s povrchom a dobre funguje s väčšinou usporiadaní predných dverí. Je tiež pohodlne osvetlený, takže ho ľahko nájdete, takže vás hostia môžu bez námahy upozorniť. Pomôžte návštevníkom okamžite nájsť váš zvonček, najmä po zotmení. VYSOKO KOMPATIBILNÝ KÁBLOVÝ Zvonček Bez problémov ho môžete použiť na takmer akomkoľvek štandardnom elektrickom systéme predných dverí. Naše okrúhle tlačidlá zvončeka majú šírku 5/8 palca a hĺbku 3/4 palca a sú navrhnuté tak, aby fungovali s väčšinou káblových transformátorov a zvončekov. Nezabudnite použiť diódu (kupuje sa samostatne), ak na predné dvere používate digitálne zvonkohry. Ľahko sa inštaluje a nemusí dokonca vyžadovať vŕtanie. Takmer každé tlačidlo zvončeka môžete nahradiť existujúcim krytom. Naše náhradné káblové zvončekové tlačidlá môžu používať rovnakú kabeláž ako starý zvonček. Inštalácia je jednoduchá a možno zistíte, že nastavenie a spustenie práce zaberie len niekoľko minút. Opravte svoj pokazený zvonček okamžite alebo urobte renováciu domu jednoduchšie. KVALITNÝ DIZAJN V spoločnosti Newhouse Hardware je naším cieľom poskytnúť vám najmodernejšie a najefektívnejšie elektrické hardvérové príslušenstvo. Ponúkame svietidlá najvyššej kvality, na ktoré sa môžete spoľahnúť niekoľko rokov. Ušetrite čas a peniaze na náklady na výmenu alebo opravu našich odolných, štýlových zvončekov. Získajte svoj hardvér Newhouse okrúhle osvetlené tlačidlo zvončeka na dverách ešte dnes a nastavte si elegantný kúsok domáceho kutila.

Nie sú k dispozícii žiadne jednotky

EAN: 0650531964861

Kategórie Nástroje a domáce potreby, Kuchynské a kúpeľňové príslušenstvo, Kúpeľňové príslušenstvo, Toalety a ich časti, Sedadlá do toalety,

Krajina pôvodu: Čína. Farba sušienka. Na použitie s toaletnými doskami KOHLER. Originálny produkt KOHLER.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Kohler
Brand	‎Kohler
Color	Biscuit
Color	‎Biscuit
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 346 ratings 4.5 out of 5 stars
Included Components	‎K-1150464-96
Is Discontinued By Manufacturer	‎Yes
Item model number	‎1150464-96
Item Package Quantity	‎1
Item Weight	0.02 Pounds
Item Weight	‎0.02 Pounds
Item Weight	‎0.32 ounces
Manufacturer	‎KOHLER
Number Of Pieces	‎1
Operation Mode	Manual
Operation Mode	‎Manual
Part Number	‎1150464-96
Product Dimensions	7.05"L x 3"W
Product Dimensions	‎7.05"L x 3"W
Product Dimensions	‎9.85 x 3.9 x 3.5 inches
Shape	Oval
Shape	‎Oval
Size	‎Pack of 1
Style	Modern
Style	‎Modern

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: S.F

It when’s!

My toilet seat was loose, I realized o have to changed this part. It worked !

Scritto da: regal5303

Exact fit easy install

Other reviews mention a new shorter damper but this hinge assembly comes with dampers and they fit fine.

Scritto da: Eric C.

Just as advertised

Installed in 2 minutes

Scritto da: B. Colonna

Replacement Part Works Like A Charm - Durability Eh - The Installation Instructions You May As Well Flush....

UPDATED June, 2017: The hinge kit is still a great fix, but apparently, it doesn't hold up as well as the original from the seat. I bought this for two seats back in 2014. It has been installed less than 3 years, and one has failed. The seat usage has not changed, and the original lasted at least 5 years. The second replaced one, very lightly used, is still OK. The third seat in the house - ironically the heaviest used, by kids and young adults, yet - is still fine on the original hinge. I suppose it is luck of the draw. I'm ordering yet another replacement, but frankly hoped for better wear. Ideally they would sell just the damper parts. The hinges themselves tend to be fine, so paying $19-20 to get two little plastic pieces is absurd. _________________________________________________________________________________ ORIGINAL REVIEW July, 2014: This hinge kit is perfect if you have a Kohler Elongated, Quiet Close, Quick Release toilet seat, such as a Cachet, and it is no longer closing slowly. It is the 1150464. It comes in several colors, identified by a dash and two position number as a suffix. Example: 1150464-96 for Biscuit. Here is a link to the Kohler webpage for a basic diagram on what the parts look like, and for color choices: http://www.us.kohler.com/us/EB-HINGE-KIT/productDetail/Service-Parts/622252.htm As others have mentioned, the problem is not with the hinge itself, but the dampers that control the closure. Kohler does advertise the dampers on their website, but the price was about the same as the whole hinge kit on Amazon. Plus, this is a toilet, so as long as you are replacing the dampers, replacing the hinge assembly will help you clean up all the gunk that gets lodged under it. My seats are the Kohler color “biscuit.” The hinge kit matches perfectly, and replacing the old dampers immediately fixes the seat closure issue. Like others, my instructions were not accurate. The paperwork that came with each of my three hinge kits was for damper replacement, as if hinge assembly wasn’t even in the kit. You can pretty much figure out how to install these, but just so you don’t need to….see below. I have added an asterisk (*) on the steps that the kit paperwork leaves out. This centers around the dampers. Kohler’s paperwork tells you to look for an L and R stamped on them, as they are not interchangeable. Forget it, there is no such stamp. I cover this below. You will need a flathead screwdriver and needle-nose pliers. 1. Open the plastic covers on the seat bolts. 2. Pull the entire seat forward; if it is a Quick-Release seat it should unclip from the hinge mounts and come off in one piece. 3. Turn over the seat, and use a flathead screwdriver to pry off the white (sometimes gray) damper cover. 4. Using needle-nose pliers. Pull each damper inward toward the center of the assembly. This will release the hinge from the seat. 5. When you are ready to install the new dampers, line up the hinge assembly with the seat. You will be sliding the dampers in from the inside toward the outside of the hinge. 6. * Insert the left damper (has a black end) in the side of the hinge marked L. 7. * Insert the right damper (all one color; off-white) in the side of the hinge marked R. 8. * In some sets, both dampers appear white, but if you look closely you will see the left one has a bluish tint to it (as it had a black end covered in a white plastic). 9. * Once both dampers have fit into their slots, they will “lock” into the hinge. You do not need to force them. If at first they do not go in, just keep sliding them in and out and they will eventually seat themselves. 10. Reinstall the white or gray cover which just snaps onto the hinge kit. 11. * If you prefer to use all fresh parts, before putting the seat back on, first change the black hinge mounts that connect to the toilet seat bolts. Two are included in the hinge kit. This is the black piece on the bolt onto which the hinge latches. If you replace these two parts, you will need to remove the seat bolts first from the toilet as the hinge mounts slide onto the bolts. 12. Push the seat back into place, and the hinges will grab the black hinge mounts on the bolt. Close the plastic covers onto the hinge and you are done. The dampers work great. I think they are quite overpriced and that for a $60-$80 seat they probably should last longer. Two of my three failed, and that was after about 4 years. That is more commentary on the seat quality though. The instructions do not match the product, which is not typical of Kohler. As far as a replacement part, these work fine. I can’t give them a perfect 5, due to the failure of the original part (which is the same damper product), and I suppose you could rate them a 4, but the instructions are so awful, I rated it 3.

Scritto da: Gary L. Anderson

Perfect Fit

Fit perfectly and easy to install on my 2011 toilet. Color is a match. No issues.

Scritto da: Robert The Consumer

Easy to install. Works good.

One of my main motivators for getting this was I have an older Kohler. It is made in USA and really heavy duty compared to the newer, light, cheap toilet seats now made in China. Mine still looked minty so I wanted to keep it. This thing popped right in and works great.

Scritto da: MrsC

Great product

The item fit perfectly easy to install and the cost much cheaper than going through Kohler for this replacement part.

Scritto da: Manesh

It works!

Piece replaced within 10 mins. Instructions very clear and easy to follow. Soft closure was a be a bit slow (probably because the dampers need some time to adjust). After a few days the speed is just okay.

Scritto da: Amazon Customer

Quick fix for a slow close

We didn't need the hinge; we needed just the two "cartridges" for the slow closing action. It would have been great if we could have purchased just the cartridges. The hinge ended up in the trash -- not very environmentally friendly.

Scritto da: Bernhard S.

Works

It was a lot better than having to buy a new seat as only our soft close was broken. Needed to make a small modification but the install was easy. Would have been nice if they included a new bolt as the old one was quite rusty after 10 years. Overall, the kit was good value.

Scritto da: David

Better than buying a new seat!

The tab had broken on our Kohler toilet seat, and I was grateful to have found the replacement hinge rather than purchase a new seat. Swapping out the old for the new assembly was a breeze (make sure that you have a pair of needle nose pliers handy), and the seat is now as good-as-new!

Scritto da: CPH

OEM fit

Just like originals