Klieština Big Horn 19693 1/2 nahrádza Hitachi 325-199, 323-421, Dewalt 326286-03, Bosch 2610906284

Brand:BIG HORN

3.5/5

44.52

Séria Dex využíva kombináciu odolných materiálov a moderného dizajnu produktov, ktoré vám pomôžu udržať vašu kuchyňu čistejšiu. Moderný dizajn obsahuje zaoblené rohy pre svieži vzhľad, ktorý vnesie moderný štýl do každej kuchyne. Drezy Dex, navrhnuté pre vynikajúcu odolnosť, sú vyrobené z vysoko výkonnej nehrdzavejúcej ocele TRU16-Gauge, aby zodpovedali každodenným potrebám. Povrchová úprava Radiant Pearl odolná voči opotrebeniu s kruhovým kefovaním maskuje škrabance a škrabance, ktoré sa môžu časom vyskytnúť, aby sa dosiahol dlhotrvajúci lesklý lesk. Hladký povrch odolný voči škvrnám sa ľahko čistí a udržiava. Drezy Dex, navrhnuté tak, aby maximalizovali využiteľný pracovný priestor, vám poskytujú ešte viac priestoru na umývanie riadu a produkcie. Zametané zaoblené rohy a jemne naklonené dno drezu umožňujú úplné odvodnenie a pomáhajú predchádzať hromadeniu nečistôt pre ľahké čistenie. Super tlmiace podložky NoiseDefend s inovatívnou fóliovou vrstvou pokrývajú všetky strany drezu, čím znižujú plechový zvuk tečúcej vody počas používania drezu. Inštalácia pod montážou vytvára plynulý prechod od pracovnej dosky k umývadlu pre ľahké čistenie, čím pomáha zabrániť uviaznutiu nečistôt pri utieraní pultov. Drez je dodávaný s ochrannou spodnou mriežkou z nehrdzavejúcej ocele a zostavou VersiDrain, ktorá zachytáva zvyšky jedla a skrýva odtokové armatúry. Súčasťou dodávky je vystrihovacia šablóna a montážny materiál pre bezproblémovú inštaláciu.

✅ Navrhnuté tak, aby minimalizovali hádzanie bitov a zvýšili robustnosť. ✅ Závity: M19x1. ✅Materiál: oceľ.
Brand BIG HORN
Item Dimensions LxWxH 1 x 1 x 1 inches
Power Source Electric

3.5

13 Review
5 Star
74
4 Star
12
3 Star
5
2 Star
1
1 Star
8

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: David W. Meyer
Light weight.
Product is good for the price, but I have to be careful not to apply too much pressure. The metal is very light weight.
Scritto da: Joshua
Just what I ordered
Works fine
Scritto da: Robert W.
Good price for a new collet.
Fits like a glove and works like a charm!
Scritto da: Gunny Angus
Works for my Craftsman Router
I "misplaced" the 1/2" collet for my Craftsman Router [Model 320.17543]; the router (from 10 years ago) that came with a fixed-based AND a plunge-base. Thought I'd try this collet; and glad that I did. It works great! Fits the treads of the router, and holds tight to the 1/2 bits I've tried! Definitely worth the $17 I spent.
Scritto da: Jerome Laux
Any port in a storm
It fits well. It does its job. Not as beefy or sturdy as the factory collets.
Scritto da: Peter Schmitz
DOES NOT FIT OLDER COLLET STYLE DEWALT ROUTERS
Part was ok but listing suggested would fit older DeWalt router and did not.
Scritto da: Jim H
works just fine on my DeWalt router
works just fine in allowing me to mount 1/2 shank bits on my 1/2" drive DeWalt router. I don't doubt it would fine on other router brands as well.
Scritto da: S. Bennett
Fits like a charm
I found a router at a yard sale and it did not have this 1/2 collet. This collet fits like an OEM product. Very satisfied.
Scritto da: Gary French
Router collet/ chuck.
Got my purchase, very happy great quality.
Scritto da: Amazon Customer
Too lightweight for a 1/2” router bit
The collet is is too lightweight for 1/2” shank bits. You can see in the photos that the wall thickness of the nut is very thin. I would not be surprised if if split or cracked if tightened. It is also a lot lighter in mass/ weight. The Hitachi is 33gm, bighorn 24gm, 27% lighter The photo shows an original Hitachi collet on the left, the big horn on the right.
Scritto da: Richer Lettre
This collet chuck is not compatible with the Hitachi M12VC router
The ½’’ collet chuck screwed on well on my Hitachi M12VC router but there is a big vibration on the router table. This is due to the collet chuck that doesn’t stay tighten on the half inch router bit shank. It’s not possible to use the router with this collet chuck because the bit becomes loose and wobble. This collet chuck is definitively not compatible with the Hitachi M12VC router.
Scritto da: RF
Collet damaged after a weeks work
Was using a cabinet router bit set and noticed high vibrations as other people had mentioned. After changing the router bits after last use, it had broken to pieces. Will be purchasing a different collet.
Scritto da: LG
Fits Mastercraft brand
Have a MasterCraft Router I bought from Canadian tire a few years back and this piece fit it just fine.

Súvisiace produkty

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array