Klein Tools VDV001-081 Multi-bitový skrutkovač, dierovací skrutkovač Multi-náradie bajonetového typu s odolnou čepeľovou priehradkou na ukladanie bitov Multi-náradie s nenárazovým dierovačom

Brand:Klein Tools

3.5/5

56.20

Viacbitový dierovací skrutkovač / skrutkovač Klein Tools vám poskytuje pohodlie manuálneho dierovania nástenných konektorov a prepojovacích panelov. Vďaka svojej opracovanej nástrojovej oceli pre väčšiu pevnosť sa tento produkt dodáva s viacerými bitmi, ktoré vám uľahčia prácu. Hriadeľ má 4 univerzálne hroty a možno ho previesť na 2 veľkosti skrutkovačov a 1 šesťhranný skrutkovač. Skvelé na použitie na 110 terminálových/prepojovacích paneloch a 66 prepojovacích paneloch. Multi-Tool s jedinečným hrotom na dierovacie konektory a patch panely. Drážkované hroty 3/16 a 1/4-palca; Phillips tipy #1 a #2. Konvertuje na 1/4 a 3/8-palcový skrutkovač na matice a 3/8-palcový šesťhranný skrutkovač. Rukoväť Cushion-Grip pre väčší krútiaci moment a väčšie pohodlie. Tip-Ident pre rýchlu identifikáciu nástroja. Dva hroty krížového skrutkovača: #1 a #2. Dva hroty štrbinového skrutkovača: 3/16-palcový (5 mm) a 1/4-palcový (6 mm). Dva skrutkovače: 1/4-palcový (6 mm) a 3/8-palcový (10 mm). Spoločnosť Klein Tools už viac ako 160 rokov vyrába ručné náradie profesionálnej kvality najvyššej kvality, ktoré poskytuje výkon, odolnosť a presnosť potrebnú na správne vykonanie práce. Naša rodina inžinierov, robotníkov a remeselníkov naďalej vkladá šesť generácií odborných znalostí do každého nástroja, ktorý vytvoríme, a to použitím len tých najkvalitnejších materiálov, vynikajúceho spracovania a výroby čo najbližšie k domovu. Klein nie je len názov našej spoločnosti, je to aj naše rodinné meno. A keďže sme americká spoločnosť, ktorá je rodinná, viete, že sa môžete spoľahnúť, že tu zajtra budeme. Klein Tools nevyrába len skvelé produkty, ale aj skvelé produkty, ktoré odolajú požiadavkám profesionálov, ktorí ich používajú každý deň... Od roku 1857.

Nie sú k dispozícii žiadne jednotky
Tip-Ident pre rýchlu identifikáciu nástroja. Rukoväť Cushion-Grip pre väčší krútiaci moment a väčšie pohodlie. Zásuvka bajonetového typu (twist & lock) akceptuje dierovacie čepele väčšiny výrobcov. Ťažká hlaveň čepele poskytuje uloženie bitov. Strojovo obrobené oceľové bity pre vynikajúcu pevnosť. Nenárazové ukončenie drôtu. Viacúčelový skrutkovač Punchdown ukončuje a reže drôt v jednom kroku pomocou kombinovanej rezacej čepele 110/66 a jej presne brúsenej reznej hrany.
Batteries Included? ‎No
Batteries Required? ‎No
Blade Length ‎3 Inches
Brand Klein Tools
Brand ‎Klein Tools
Color Multi
Color ‎Multi
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 654 ratings 4.5 out of 5 stars
Head Style Phillips
Head Style ‎Phillips
Included Components ‎VDV001-081
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎8 x 1.5 x 1.5 inches
Item model number ‎VDV001-081
Item Package Quantity ‎1
Item Weight ‎0.3 Pounds
Item Weight ‎4.8 ounces
Manufacturer ‎Klein Tools
Material Blend
Material ‎Blend
Model Name ‎VDV001-081
Number of Handles ‎1
Number of Items 1
Number of Items ‎1
Number Of Pieces ‎1
Part Number ‎VDV001-081
Product Dimensions ‎8 x 1.5 x 1.5 inches
Size ‎One Size
Style ‎Multi-tool with Non-impact Punchdown

3.5

13 Review
5 Star
78
4 Star
9
3 Star
3
2 Star
4
1 Star
7

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Paul Sretavong
Got A Lot Of Use, But Broken Spring Like Others
Overall, this is a great punch down tool. But like other reviews, the spring in mine broke as well. I at least got about a years worth of daily usage before the spring gave out in the middle of a punch. For the price, you would expect it last longer.
Scritto da: John Miller
Punch down works
It doesn’t click like a normal punch down tool but great since I can’t find my other one and the cost is much less than a replacement ideal punch down. This might not be great for a big job but for one or two it’s awesome
Scritto da: Manuelita Irma Di Rocco
Neat tool
This was a recommendation by my son, who installs cable. I was intent of doing a job for myself without hiring someone to do it. This was a great handy tool to punch down the CAT wires into a wall ate which I had ran thru the attic from a router to an area I needed a hard wire outlet plate to be. Female determination.
Scritto da: Brandon barkley
Almost perfect
Would get a 5 out of 5 if the bits stayed in better..
Scritto da: James Greco
Best punch down tool I have used
Quality
Scritto da: Pattylew
The punch died.
After about 500 punches the spring died. Hopefully it's not just mine...
Scritto da: David M.
Well-made and mostly efficient tool
I bought this to install Cat6 and RJ11 Keystone jacks for our home network and a corded phone extension. It worked almost perfectly - just make sure that, when you're pushing down on the tool, you hold it at 90 degrees to the jack, otherwise it may either damage the small prongs in the jack or just not push the wire in properly. The integral wire cutter didn't always cut completely through the protruding wires, but they were easy to break off afterwards. It's a nicely-made tool (as usual for Klein), with a strong pouch to store it.
Scritto da: ARIZAI
Quality spring
Bought it a couple weeks ago . After a few days of work the spring gets jam every 2 to 3 punches down the line, very disappointed
Scritto da: GURUTECH
Perfect for what I need it for Quality is superb
Perfect for what I need it for Quality is superb
Scritto da: Dave P
nice looking punch down tool that does not cut it!
I run a data installation company with 4 skilled data engineers our existing krone tools are getting worn out with constant use around 1,000 per day we perchased 1 of these tools, to try out, as they have a good reviews in the states. the tool duly arrived i gave it to the engineers, try this and tell me what you think, well to say that they were NOT happy is an understatement, comments not fit to post here !!!! I have also tried punching with the klien tool i agree with my engineers the unit punches the cat7/cat6/cat5 really well BUT it does not cut the ears of the cables after punching into the krone point i did sent an email to the uk stockist but after a long wait still have not had a reply we have tested the punch tool with variouse units but it still does not pass the test fluke have a simular unit and it has the same issues not cutting i hope my review shakes some trees and a responce from klien toolsis forth coming
Scritto da: John S.
The tool is not as good as Klein make out.
The terminating tool for the Cat6 cable is useless.
Scritto da: Lyle
Will not last even 5000 punch downs.
I purchased this to replace my cheaper quality punch down tool. This lasted 1 year and a half, and the spring broke on the inside and won't punch down. I purchased thinking thr klein punch down was better, my so call cheaper quality had out lasted this klein tool. What a huge disappointment, will buy a different more quality brand. Do not purchase.
Scritto da: Don Thomson
Compression punch broke after only 8 months of use.
I'm in the cabling business - myself and my business partner both had this same tool and both failed almost at the same time due to the compression part of the tool breaking. The tool is only 8 months old. If it didn't break I would have likely given it 5 stars as it worked good up until now. I expected better from Klein Tools. Also the fact that another user and also my business partner had the same exact failure shows this is NOT a one-off defect, but an inherint defect with this punch tool. I have a back up that is not so nice on ergonomics, but it is over 10 years old and still working.

Súvisiace produkty

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array