Kegco BF STCK-5T Štandardná súprava na konverziu Tower Kegerator s 5 lb nádržou na CO2, štandardná

Brand:Kegco

3.5/5

564.44

Táto štandardná súprava na prestavbu na vežu je dokonalým riešením pre tých, ktorí prestavujú kompaktnú chladničku alebo mrazničku na kegerátor. Táto súprava sa dodáva s úplne novými, vysoko kvalitnými komponentmi čapovaného piva a obsahuje všetko, čo budete potrebovať na úspešnú premenu vašej kompaktnej chladničky/mrazničky na kegerátor pri veľkých úsporách. Poznámka: Beverage Factory je jediným autorizovaným predajcom súprav Kegco Kegerator Kit (iní predajcovia predávajú horšie súpravy, na ktoré sa nevzťahuje záruka alebo kvalita Kegco zaručená.

VRÁTANE PRÁZDNÉHO 5 LB. HLINÍKOVÁ NÁDRŽ CO2: Všetky naše úplne nové nádrže sú vyrobené z vysoko pevnej hliníkovej zliatiny, ktorá nie je taká ťažká ako oceľová nádrž a nehrdzavie. Tieto pútavé nádrže majú lesklý červený povlak, ktorý pôsobí ako dodatočná vrstva ochrany proti korózii a opotrebovaniu. ŠTANDARDNÝ KOVOVÝ KĽÚČ NA PIVO: Tento kľúč na kohútiky na pivo je základným nástrojom, ktorý vám umožní rýchlo a s istotou uvoľniť alebo utiahnuť objímky drieku bez toho, aby ste poškriabali kohútiky. Tento kľúč bol vyrobený tak, aby vydržal s robustnou celokovovou konštrukciou a pohodlnou 5-1/4 dĺžkou. VEŽA NA ČAPNENIE JEDNOHO FAUCETU: Táto vzduchom chladená veža na čapovanie piva s 3 priemermi, s krásnym štandardným kovovým povrchom a zodpovedajúcim štandardným kohútikom s kovovou pákou, je rovnakou štýlovou vežou používanou na väčšine komerčných kegerátorov. Táto veža pohodlne obsahuje 5 stôp číreho pivného potrubia končiaceho dýzou a zostavou šesťhrannej matice pre rýchle pripojenie ku všetkým štandardným spojkám sudov, ako aj tesnenie a štyri skrutky pre jednoduchú montáž. KEG KEG SPOJKA S PÁKOVOU RUKÁVOU: Táto Kegco KT85D-L D systémová KEG spojka schválená NSF má robustné poniklované telo z kovanej mosadze so sondou z nehrdzavejúcej ocele a je určená na použitie so všetkými domácimi sudmi americkej značky Sankey D system. Dizajn páky a rukoväte sa ľahko používa; jednoducho vytiahnite a potom sklopte rukoväť, aby ste sud spojili. Tlakový poistný ventil 55 psi robí túto spojku ešte pohodlnejšou na používanie a umožňuje únik pretlakového plynu skôr, ako vstúpi do vášho suda. REGULÁTOR S DVOJITÝM MERANÍM SÉRIE PRO: Jednoducho zmerajte objem PSI a CO2 a upravte výstupný tlak CO2 pomocou tohto regulátora s dvojitým tlakomerom Kegco 542 Pro Series vybaveného prémiovými funkciami. Horný manometer ukazuje výstupný tlak, zatiaľ čo bočný manometer vám povie, čo zostalo v nádrži CO2, takže vám počas párty nedôjde benzín. Štandardné pokovované mosadzné telo má veľký gombík na nastavenie tlaku pre jednoduché použitie a obsahuje ručný ventil na uvoľnenie tlaku.
Customer Reviews 4.5 4.5 out of 5 stars 100 ratings 4.5 out of 5 stars
Is Discontinued By Manufacturer No
Item model number BF STCK-5T
Item Weight 17.41 pounds
Manufacturer Kegco
Product Dimensions 20 x 10 x 12 inches

3.5

13 Review
5 Star
77
4 Star
9
3 Star
5
2 Star
4
1 Star
6

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: engrstudent1984
Exactly what I was looking for!
I ordered this item to convert a used mini fridge into a man cave focal point. It was just what the doctor ordered. Each item came indivually packed in a larger box with no damage noted from the shipping process which was pretty quick. All items are well constructed and I suspect the tower/tap will function for years to come. You cannot go wrong with this item. Some thoughts for those wanting to do a conversion: 1. When considering a one tap tower vs. a two tap tower remember that keg beer is unpasteurized and lasts only 1-1.5 months. The smallest standard keg (1/6 barrel) holds something like 5.3 gallons. So unless you have a lot of beer drinkers all the time a two tap tower might be an unnecessary added cost. 2. I wouldn't recommend buying a new mini-fridge as you run the risk of destroying it if you drill the beer line hole in the wrong location. It took only a few days of looking around online (Craigslist) to find a used one for $60 that would fit the bill (look for one without a freezer). 3. There are PLENTY of videos online which show the conversion process and how NOT to damage your fridge, so once you have this kit it takes no longer than 30 minutes start to finish. 4. CO2 can be obtained from a gas supply store for much cheaper than a beverage supply store. Here in SC I can get a food grade CO2 fill up for $15 at Airgas National Welders. I hope this info helps and you enjoy your kit as much as I do. Happy Drinking!
Scritto da: BrandonM427
Great kit except for the regulator.
I installed this kit in a mini-fridge that I was not using anymore. Very easy to install with the right tools. The only problem I had was with the CO2 regulator. The low-pressure side would slowly rise to 40psi even with the adjustment screw out all of the way. I ordered a TapRite brand regulator and now my kegerator works and pours perfectly. Just make sure your fridge can keep temperatures below or at 40F. Also, the instructions say to run CO2 pressure at 10-12psi, but I find I get better pour at only 3-5psi. At 10psi, my system pours too fast and it is very foamy (half glass of foam at least). At 5psi or lower, it pours a perfect mug of cold beer. I'm new to home draft beer systems, so maybe it's just me. If somebody with more experience has other tips, please let me (us) know. Hopefully my faulty regulator was a fluke. Even though I had to replace the regulator, you get everything you need to convert an old fridge to a kegerator and the chrome tower and faucet look very nice. Overall, I recommend this kit.
Scritto da: B. Dominic
Works Perfectly, though the tower is a bit unstable
This system is impeccable, exactly what the doctor ordered. Installation took about 30-45 minutes after verifying that the fridge contained no lines running through the top. I used a 1.5" hole saw to drill through the top. The rest was a cinch. There was just one thing that needs improvement and that is the stability of the tower. The screws are too short. I would recommend getting longer screws (long enough to go through the top of the fridge) and anchor each with a nut and washer. Drill a pilot hole first though! Pro-tip: Get your CO2 tank filled at a local Fire Protection company (eg. Cintas Fire Protection). They filled mine up for $15. I've gone through 2 kegs now and no sign of slowing on CO2 pressure.
Scritto da: TimPro
Heavy Duty Hardware - Great Quality!
Installation was easy and the quality is amazing. Very heavy top-quality hardware and connections. A few tips: 1. Most CO2 refill companies will require you exchange your tank for theirs - be prepared to give up the nice aluminum tank. Check your local fire extinguisher refill companies in the yellow pages and DO NOT use paintball refill retail outlets (some add lubricating oil to their CO2). 2. If running the tower mounted on a bar outside of the refrigerator, you will need to keep the beer line temperature at a cool 38 degrees. Do this by running the line through 2" PVC and using a 12 CPM pole fan (and 1" tube) inside the fridge to circulate the cool air through the pipe and tower. I used a 2.5" hole saw to accommodate the piping. Failure to do so will result in lukewarm foamy beer. Enjoy!
Scritto da: Matthew Bublitz
Works Great
Recently I got a Kegerator and I refurbished it. I took all of the inner piping out, along with the tank. Using this kit it was very easy to replace everything. All of the parts I needed came included with step by step instructions on what to do. The only issue I had when installing were that the new pillar was not the same size as the one that was already on it. This required me to drill 3 new holes, but once that was done it was easy. The hardest part was finding somewhere that would fill the CO2 tank.
Scritto da: Righteous Pops
Top Quality products and Best prices!
I researched Kegerator kits online for several weeks before deciding to purchase mine from Kegco. Quite frankly they are miles ahead of anyone else when it comes to quality, price and service. Every piece of the kit is top of the line, heavy duty and built to last. Compared to the fully assembled Kegerator I purchased last year the quality and workmanship in each piece far exceeds my expectations. I am in the process of building a 2nd kegerator as a gift and quite frankly I am a bit jealous because the quality of the gauges, tower, lines, and coupler is superior to my existing unit. I would highly recommend purchasing this from Kegco - they offer the best prices, best delivery, and highest quality you will find!
Scritto da: Blake LaFleur
Works great so far
Works great so far. The only complaint I have is that the beer lines are too short. Had to upgrade to 10ft 3/16" ID lines in order to reduce foaming. Only tip i have is to fab up a tower cooler, otherwise your first pours will be 3/4 foam as well.
Scritto da: Amazon Customer
Easy to follow instructions
When I ordered my kegerator I didn’t realize that the tower was not included. I ordered it and it was available in one day. It was extremely easy to install and the instructions were very easy to follow
Scritto da: Vanblitz
Five Stars
Amazing to put together and love it !
Scritto da: Joe Faught
Five Stars
easy to install. works good
Scritto da: matvei
Five Stars
Good product
Scritto da: Vincent Beaudoin
Five Stars
perfect for my project
Scritto da: TG
Perfect for kegorator
Perfect to build a kegorator. Great quality, and wouldn't hesitate to buy again.

Súvisiace produkty

hot
Spojka na ľad Kegco, 4-1/2
4.1/5

€ 72.14

Spojka na ľad Kegco, 4-1/2
4.1/5

€ 72.14

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array