Jonard Tools ST-450 nastaviteľný presný odizolovač drôtu, 26-36 AWG 26-36 AWG 26-36 AWG, 3-57/64 dĺžka x 1-19/32 výška x 19/32 hrúbka

Name: Jonard Tools ST-450 nastaviteľný presný odizolovač drôtu, 26-36 AWG 26-36 AWG 26-36 AWG, 3-57/64 dĺžka x 1-19/32 výška x 19/32 hrúbka
Brand: JONARD TOOLS
SKU: 0811490010192
Price: 87.02 EUR
Availability: InStock

Brand:JONARD TOOLS

3.2/5

€
87.02

Tieto presné odizolovače sú vybavené nastavovacím kolieskom, ktoré umožňuje operátorovi vybrať jedno zo šiestich rôznych nastavení. Kalibrovaný doraz drôtu potom možno nastaviť na požadovanú dĺžku izolačného pásu. Jediným pohybom operátor stlačí a potiahne nástroj. Táto akcia zapojí štyri špeciálne tvrdené čepele na čisté prerezanie izolácie drôtu, zatiaľ čo ťahový pohyb preruší väzbu medzi izoláciou a vodičom. Nastaviteľné na šesť prierezov drôtu: 26-36 AWG. Meria dĺžku 3,9 cm, výšku 1,6 cm a hrúbku 0,6 cm.

Suma

Pridať do košíka Kúpte teraz

EAN: 0811490010192

Kategórie Nástroje a domáce potreby, Priemysel a veda, Elektrické a ručné náradie, Ručné náradie, Odizolovače káblov, Strihače a lisy,

ABS POUZDRO: Môže sa ohriať až na 100 °C vo vode na účely sterilizácie. ĽAHKÝ: Kompaktný dizajn váži iba 1 oz a meria 3,9 na dĺžku. ČEPEĽ Z KALENEJ OCELE: Prerezáva väčšinu typov izolácie drôtov s veľkou presnosťou a ľahkosťou. NASTAVITEĽNÁ ZARÁŽKA: Umožňuje operátorovi odizolovať drôt v špecifických dĺžkach od 0,039 do 2,0. UNIKÁTNY DIZAJN: Odizoluje 26-36 AWG vodičov pomocou jedinečne navrhnutého odizolovacieho mechanizmu.

Brand	JONARD TOOLS
Country of Origin	China
Domestic Shipping	Item can be shipped within U.S.
Handle Material	Acrylonitrile Butadiene Styrene
Handle Material	Acrylonitrile Butadiene Styrene (ABS)
International Shipping	This item can be shipped to select countries outside of the U.S.
Item Dimensions LxWxH	2 x 0.75 x 6 inches
Item model number	ST-450
Item Weight	0.05 Pounds
Manufacturer	Jonard Industries
Material	Acrylonitrile Butadiene Styrene
Material	Acrylonitrile Butadiene Styrene (ABS)
Product Dimensions	2 x 0.75 x 6 inches; 0.8 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Victor E.

Pretty good but...

The strippers on the right were purchased in the early eighties and were fantastic. But they are no longer available and the blades a quite worn. I can't even identify them because the foil label has rubbed clean. The method on the left is what I have been using for years and although it's a bit awkward to use can outperform any wire stripper. I've stripped some fairly fine headphone/earbud wires with very few strands without loosing strands. These strippers are nice but I still find myself using the flat plyers with a razor blade most of the time.

Scritto da: Dr. Keith J. Caserta

Works with a Little Practice

About the only very fine-gauge wire stripper I could find. It goes down to 36 gauge, though I only used it for a 32-gauge wire. It worked fine, but required a little practice to get the grip tight enough to cut the insulation, but not so tight as to make it impossible to pull out. Particularly useful for model building (railroads, miniature scenes, etc.), where the wires on things like street lights or tiny motors are very fine. For $50, it should work without binding the wire, but I was satisfied that, with practice, it worked okay.

Scritto da: fiona

An absolute necessity for stripping PTFE

I originally found one of these in a thrift store, wore it out, and bought a new one. I wasn't expecting it to be sturdy enough to actually get the job done, but I was wrong! It works really well. I use Teflon-coated wire, which is extremely slippery and notoriously difficult to strip. This thing makes it so much easier. My only complaint is that I wish they would round the edges at the bottom where it sits in your hand. Those sharp corners will literally tear a gash in your palm if you're stripping wire for as many hours as I do. I taped a piece of foam to the bottom, which definitely helps. I suppose one could wear gloves while using it, too. I hate working with gloves, so they foam hack turned this helpful tool into the perfect one for the job.

Scritto da: B. Brown

Good product

Well built and works very well. Does not nick the wire if you set it right.

Scritto da: Ben g.

Loose ruler

My tool almost felt like it had been worn out. The ruler in the middle is loose and the thinnest wire even will push it back and I have to eyeball each measurement. Other than that, it's great.

Scritto da: Doug Bierce

Great tool for dealing with small gauged wire

I have been pleased with how well this tool works on fine wire.

Scritto da: ParaPilot

Expensive but virtually without equal

For what it is, this product is horrendously expensive, HOWEVER it is the third identical one I have purchased it the past 10 years as there are few if any tools on the market that compare to this item. I use it for precision stripping 18 - 32 AWG wire that is going to be crimped into commercial and military grade connector crimps. The tool has 2 adjustments, one for the diameter of the wire (annoyingly in mm but they provide a handy table on the side to convert to AWG so no issue)and a slider that adjusts to very accurately set the length of the wire to strip. This tool allows me to very consistently and accurately strip cores in multi-core cables prior to precision crimping and I simply would be lost without it. The blades are good for 2,500 - 4,000 strips and if you set it up correctly it is virtually impossible to accidentally cut through a wire core. For military and aircraft grade work like I do every day, this tool is a must have and I have one in my mobile tool kit as well. This tool is not cheap but I still give it 5 stars and would highly recommend it if you need this type of precision.

Scritto da: Terry Baremor

Nice concept bad design

The concept of this tool is intriguing, as it has adjustable wire gauge settings, and the length of the strip is adjustable. The problem I believe is that this tool has 4 cutting blades so you are ending up putting a round peg into a square hole. I was using this on 24 gauge stranded data wire in which it also pulled several stands of wire with the strip. Even if I set the wire gauge setting to 22 gauge it would grab a few strands with it. So I returned mine. Maybe it would work ok on solid wire.

Scritto da: dee

Simply just does not work

I so much wanted this to work. I was so excited at the size of this tool, and how easily it could be handled to strip small gauge wire. But, in use, it fails miserably. Others have commented about incorrect sizing of the dial. I couldn't get any dial setting to work on several different wires. Others also have commented about the length gauge being very loose. It seems to tighten and loosen at various times. I suspect that squeezing to strip causes the top/bottom of the tool to change positioning, resulting in the tightning/loosening of the length positioner.

Scritto da: Hyeran Kong

I received a black stripper..

Somehow I got a black color one. I have used this one before and bought again as it broke. This stripper is not as strong as scissor shaped ones. I took out 2 stars as I wanted to have a yellow one.

Scritto da: miguel knott

Muy satisfecho con este producto

Lo uso para pelar los 8 cables de un cable ethernet. Agarro cada cablecito con un pincer de punio, y el Jonard es bien efectivo en pelarlo .

Scritto da: Amazon Customer

works, though not perfect

only stripper I found down to 36 gauge but will miss some strips, technique is important.

Scritto da: Anna

great unit

works great.