JET CS-18 podlahový stojan pre frézy/vŕtačky (350045)

Name: JET CS-18 podlahový stojan pre frézy/vŕtačky (350045)
Brand: Jet
SKU: 0662755793172
Price: 1182.91 EUR
Availability: InStock

Brand:Jet

3/5

€
1182.91

Získajte pokoj na ceste a ľahko prekonávajte terénne prekážky s montážnou doskou na navijak Polaris RZR Rough Country. Táto ľahko inštalovateľná súprava upgraduje váš UTV o základné funkcie obnovy, keď to najviac potrebujete. Táto odolná doska navijaka vyrobená z odolnej 3/16-palcovej oceľovej konštrukcie má dvojité vzory montážnych skrutiek navrhnuté tak, aby pevne sedeli na navijaky s hmotnosťou 3 500 lb – 5 000 lb, takže si môžete vybrať presné nastavenie, aké potrebujete. Každý z nich je potiahnutý čiernou práškovou farbou, ktorá chráni pred živlami a poskytuje dlhú životnosť dobrého vzhľadu a výkonu. Inštalácia je hračka, nie je potrebné vŕtanie! Jednoducho naskrutkujte toto vylepšenie a pripevnite navijak a ste pripravení na čokoľvek, čo vám chodník postaví do cesty.

Suma

Pridať do košíka Kúpte teraz

EAN: 0662755793172

Kategórie Nástroje a domáce potreby, Elektrické a ručné náradie, Nástroje a príslušenstvo k elektrickému náradiu, Stojany a mobilné podstavce, Stands,

Záruka JET Red Assurance: Podporovaná špičkovou 90-dňovou zárukou spoločnosti JET na výrobné chyby. Rozmery: 31-1/4 x 23-1/4 x 28. Kompatibilita: Navrhnuté tak, aby pasovali na JET Mill/Vŕtačky (350017, 350018, 350020).

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Jet
Brand	‎Jet
Color	Black
Color	‎Black
Country of Origin	‎Taiwan
Customer Reviews	4.0 4.0 out of 5 stars 27 ratings 4.0 out of 5 stars
Included Components	Floor Stand
Included Components	‎Floor Stand
Is Discontinued By Manufacturer	‎No
Item model number	‎350045
Item Package Quantity	‎1
Item Weight	‎72 Pounds
Manufacturer	‎JET
Part Number	‎350045
Power Source	Hand Powered
Power Source	‎Hand Powered
Product Dimensions	32"L x 26"W x 29"H
Product Dimensions	‎32 x 26 x 29 inches
Product Dimensions	‎32"L x 26"W x 29"H
Warranty Description	‎90 Days

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Harvey Adkins

Expensive for what it is.

Would have preferred a stronger stand!! Hated putting my new Drill-Mill on it, worrying about future problems. It doesn't end up perfectly square once assembled. This was a problem when adding a roller base. Also, the top pan sits loose on the top and is not attached until the mill is set in place. This makes it very difficult to line up the mounting holes!! Then, the mounting holes are spaced so that when the mill sits on top of it, the inside holes are not spaced so that the rubber grommets stay in because the machine sits on half of them which causes them to peel up and out. Obviously, the engineers that designed this unit, have never put one together and have never had to LIFT and place a drill/mill on it and keep the top pan lined up! It is funny that it comes with a set of legs, again, the unit weighs almost 400lbs. I didn't trust using the provide legs, that's why I bought this unit. If I had to do it all over again, I would have had a stand made by a local welder and had it made out of stronger welded tube steel. Could have had much stronger unit for about the same money or even less!! Only time will tell if it lasts.

Scritto da: Jane K. Smith

Just okay so far

I bought this Jet stand to hold my son's recently purchased mill/drill. The package arrived in fine shape but there were some issues that I don't equate with a quality product. The first thing noticed as we began assembling the stand was some sharp edges on the sheet metal parts. No cuts but since people will be reaching inside the stand to access stored items the edges will need to be fixed. Next we found the tabs used to align and secure the side panels had to be pried open to allow them to mate with the front and back panels. Got that done and then realized the instructions failed to indicate a lock washer should be used with each of the hex bolts. Not a big deal but instructions should be more detailed. We also found the door did not match the opening in the front panel. A few whacks with a hammer and the door fit but since these are stamped parts it is hard to understand how Jet can't make a square door fit a square opening without the customer having to do the final shaping. On the plus side the stand looks nice and feels very sturdy so should not be any issues holding the mill/drill. We have not mounted that yet so I will update this review when that is completed.

Scritto da: Michael B.

Flimsy

An overpriced, flimsy product that's difficult to assemble.

Scritto da: Vincent Sanchez

Short but sweet!

Very sturdy and professionally made. I was pleasantly surprised to find that the mill I had purchased from Harbor Freight back in 2002 (Now discontinued) fit this stand perfectly. The only problem I have with it is that it's too short to use while standing, so I'll have to get a 2 foot stool. Also, the hole for the door has the wrong size thread for the door handle bolt. Luckily, I happened to have the correct size tap tool, so that solved the problem quickly.

Scritto da: Paul D.

Fit My Grizzly G0619 Mill Except for Holes in Base

Metal was a lighter gauge than I was expecting (think filing cabinet), but it was surprisingly sturdy nonetheless. Removing the leveling feet allowed the frame to contact the stand base better. Will need to close holes in drip pan with stoppers. Would buy again.

Scritto da: Amazon Customer

While the stand is good quality it and the chip pan come with 2 ...

While the stand is good quality it and the chip pan come with 2 sets of holes punched out to accommodate 2 different size machines. The sealing grommets that plug the unused holes are made for only one thickness of metal. The pan and the stand are 2 thicknesses and the grommets suck. That plus the fact that the smaller machine base catch half of the grommets making them pop off.

Scritto da: Turtle Shell 666

Sturdy

Holds up my 600 pound mill drill, does everything it needs to, not necessary to bolt machine to it, 600 pounds isn't going anywhere

Scritto da: Steve

Fits great

Worked well for jet 18 model fits perfectly. Needs adjustable feet to level out though