IRWIN súprava stupňovitých vrtákov, 3-dielna (10502CB) 3PC SET kobalt

Name: IRWIN súprava stupňovitých vrtákov, 3-dielna (10502CB) 3PC SET kobalt
Brand: Irwin Tools
SKU: 0038548099255
Price: 115.52 EUR
Availability: InStock

Brand:Irwin Tools

3.5/5

€
115.52

POPIS PRODUKTU Táto súprava kobaltových vrtákov IRWIN Unibit je vyrobená z kobaltovej ocele M-35 pre maximálnu životnosť pri vŕtaní do húževnatej ocele. Konštrukcia hrotu SpeedPoint poskytuje rýchle štarty a obsahuje laserom označené veľkosti pre ľahké čítanie. Dizajn radiálnej konkávnej drážky pomáha zabezpečiť efektívne využitie sily vŕtania. OD VÝROBCU Irwin's Unibit SpeedPoint spája najžiadanejšie vlastnosti stupňovitej vŕtačky, rýchlosť a ovládanie a až 13 rôznych veľkostí na jednom stupňovitom vrtáku s jednou drážkou. Súprava priemyselného náradia Irwin 10502CB 502 (10231, 10232, 10233), 3-dielna

Nie sú k dispozícii žiadne jednotky

EAN: 0038548099255

Kategórie Elektrické a ručné náradie, Nástroje a príslušenstvo k elektrickému náradiu, Nástroje a príslušenstvo pre vŕtačky, Vrtačky Vrtáky, , Vrtačky s drážkou,

Obsahuje bity #1C, #2C a #3C. Vrtáky IRWIN majú laserom označené veľkosti pre jednoduchú identifikáciu. Vrtáky majú radiálnu konkávnu drážku. Tip SpeedPoint pre rýchle štarty. Vrták je vyrobený z kobaltovej ocele M-35 pre maximálnu životnosť pri vŕtaní do húževnatej ocele. Obsahuje bity #1C, #2C a #3C. Vrtáky IRWIN majú laserom označené veľkosti pre jednoduchú identifikáciu. Vrtáky majú radiálnu konkávnu drážku. Tip SpeedPoint pre rýchle štarty. Vrták je vyrobený z kobaltovej legovanej ocele triedy M-35 pre maximálnu životnosť pri vŕtaní do húževnatej ocele.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Irwin Tools
Brand	‎Irwin Tools
Color	‎Black
Customer Reviews	4.6 4.6 out of 5 stars 214 ratings 4.6 out of 5 stars
Cutting Angle String	135 Degrees
Cutting Angle String	‎135 Degrees
Finish	‎Titanium Nitride
Finish Type	Titanium Nitride
Finish Type	‎Titanium Nitride
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎7.75 x 5.5 x 1.63 inches
Item model number	‎10502CB
Item Package Quantity	‎3
Item Weight	‎3.2 ounces
Manufacturer	‎IRWIN
Material	Titanium Nitride Coated
Material	‎Titanium Nitride Coated
Measurement System	‎Imperial
Part Number	‎10502CB
Product Dimensions	‎7.75 x 5.5 x 1.63 inches
Shank Type	Straight
Shank Type	‎Straight
Size	‎3PC SET
Style	‎Cobalt
Surface Recommendation	‎Aluminum,Brass,Copper,Pvc,Steel,Wood
Tool Flute Type	‎Spiral

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Art Buckler

Great for steel

Great for steel. I wasted a nice chunk of money on other step bits, including Milwaukee impact ready, HF "titanium", Klein black oxide, etc. I use these to drill steel up to 3/16" thick. They cut quickly in a hand drill with minimal oil (horizontal position) and, so far, do it without dulling. I wish I had bought these first.

Scritto da: OWL

Good step drill bit set

The IRWIN step drill bit set is good quality and the reason I give it only 4 stars is because one of the step drill bit shaft was bent from the factory with a wobble, I expected better quality from ERWIN, I would still recommend, but check the quality first for any possible defects.

Scritto da: Kevin

Quality tool

Great quality. Worked good on steel 1/4"

Scritto da: Brian

Great for fiberglass

I'm doing a fiberglass car project, and these things leave much nicer edges than my normal pilot point bit sets. And even on un-masked gelcoat, this leaves minimal cracking. (Though I'd still recommend using masking tape, and cutting in towards the gelcoat). I like the right-most one, which has long steps -- it helps get nice straight holes, even through a fairly thick piece of fiberglass. The only minor thing is that I wish that there was more variety in sizes. The bigger one is, if I recall correctly, 3/4" at the largest. If the set had a narrow, medium, large one, it would be slightly more versatile, than the current set which has 2 narrow ones, and a medium one.

Scritto da: Mike K.

Great step bits.

The quality I expected from Irwin. I was able to drill up to the 1 and 3/8th of an inch, definitely can go beyond. I only needed this to complete a customers request. I suggest using a good cutting oil to protect your investment. I was cutting though 1/8 inch mild steel. I have found that when it comes to a mechanics need for good bits, Irwin has never let me down.

Scritto da: matthew p hahn

Irwin step drill bits

Arrived today didn't use yet but seem like nice bits, only thing is they came in a cloth zipper bag with black foam inside to hold them in place, not a big deal just not the metal case in the picture, I get a little frustrated when I get something other than what I'm shown.

Scritto da: Rob C

Nothing beats a name brand

These drill bits are pricey but they will outlast any cheap sets offer by other companies. They seem to be the best drill for sheet metal and steel.

Scritto da: Joe

Could be better.

A little dull, but works well for the most part. I wish the larger unibit came to a point, it’s a little bit of a pain constantly changing them out to start the hole then, again to make the whole bigger.

Scritto da: Max

Photo su boitier different de ce que l’on reçoit !

Boitier differe de celle sur la photo,n’enlève rien au produit mais recu dans un boitier semi rigide au lieu du boitier qui semble etre en metal!! La photo devrait etre mis a jour! On s’attend à recevoir ce qui est sur la photo

Scritto da: godbs

Use it for many years

Perfect