HHIP 3900-3012 10 párov 1/8 presná paralelná súprava, 1/8 x 3, drevené puzdro Súprava 1/8 x 3 drevené puzdro

Brand:HHIP

3.5/5

82.14

HHIP 1/8 X 3 10 párová presná paralelná súprava Vyrobená z kvalitnej nástrojovej ocele, ktorá je zbavená napätia proti deformácii Presne brúsené a kalené Kompletné s namontovaným dreveným puzdrom 2 otvory v každej paralelnej veľkosti vrátane 1/8 X 1/2 X 3 1 /8 X 5/8 X 3 1/8 X 3/4 X 3 1/8 X 7/8 X 3 1/8 X 1 X 3 1/8 X 1-1/8 X 3 1/8 X 1- 1/4 X 3 1/8 X 1-3/8 X 3 1/8 X 1-1/2 X 3 a 1/8 X 1-5/8 X 3 Tolerancia je rovnobežná s 0 0003 na 2 stranách hore & dole Rozmery sú v tolerancii 0 001

Nie sú k dispozícii žiadne jednotky

EAN: 0769053022833

Kategórie Priemysel a veda,

Tolerancia rovnobežná s 0 0003 na 2 stranách hore a dole. 2 otvory v každej paralelne. Kompletné s namontovaným dreveným puzdrom. Presne brúsené a kalené. Vyrobené z kvalitnej nástrojovej ocele, ktorá je zbavená napätia proti deformácii.
Brand HHIP
Country of Origin USA
Item Dimensions LxWxH 6 x 3 x 3 inches
Item model number 3900-3012
Item Package Quantity 1
Item Weight 0.01 Ounces
Manufacturer ABS Import Tools, Inc.
Material Tool Steel
Product Dimensions 6 x 3 x 3 inches; 0.01 Ounces

3.5

13 Review
5 Star
68
4 Star
21
3 Star
4
2 Star
3
1 Star
3

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Babs60462
Looks Great... till you open box
Inside cheap styrofoam parallel dividers all jacked up and malformed with many parallels not in slots either from shipping or factory. I had to reposition and re-glue flimsy cheap dividers. Lucky the dividers still were in one piece to do so! One pair of parallels (1-3/8 high) deeply stained in several spots under protective "onion skin". Haven't yet checked for parallelism. You get what you pay for! Probably cost the Chinese a couple dollars to manufacture?
Scritto da: Brian Meyette
seem OK - no issues
These seem to be OK. They arrived clean and free of rust and dings. Each pair was wrapped separately in oiled paper. The internal spacers for the parallels are made of a very soft foam-like material that failed to hold the parallels in place during shipping, so some of them were scattered around in the box, and the foam was all distorted. Whether it will regain its shape remains to be seen. I think the box would have been better and more effective with wood separators.
Scritto da: Rooster
Nice set
Nice set with a sturdy wooden case. No flaws found. I think this was a good buy.
Scritto da: Steve Blanchet
Nice set
Precision is spot on most of them, there were 2 that were 10 thou out
Scritto da: Reviews
Great to add to my tooling collection
Yes these were made in China and China doesn’t have the best reputation for high quality right now. These parallels were wrapped in paper with plenty of oil on them to prevent them from rusting, which is very nice to have. They are pretty accurate, which is even better!
Scritto da: Jeff Urbano
Bad packaging
I guess I should have seen it in the picture before I bought this but for the price wood rests would have worked a lot better then the cheap flimsy foam that these came in . I’m sure they will do what they are suppose to do but really. This makes me rethink if I will buy from this manufacturer again. I will check them Monday to see if they even match .
Scritto da: Uri Benchetrit
Good value for the money
All plates arrived clean of rust and dents. That is relieving after reading one of the reviews before the purchase. Each pair was wrapped in a protective oiled paper separately. The only minor thing is the internal holders/spacers of the parallels are made of a very soft material that failed holding the parallels in place during transportation.
Scritto da: JB
Nice little set of parallels, nice case too
I would buy these again. Complete set and in a nice box.
Scritto da: Velo
Good Buy.
I'm pleased. Parallels came in a nice wooden finger jointed box. Foamy plastic dividers were bent out of shape and parallels jumbled together in shipping. The divider fingers needed more adhesive . This is not a big deal as this can be easily corrected. I liked the box so much that I made my own oak dividers. The parallels are good quality and are accurate. I'm an ex machinist and I would recommend this set as a good buy.
Scritto da: Blue900Custom
Great parallels
I purchased these parallels for my hobby shop. My milling machine is a medium sized knee mill. The only size vice that will fit on it is a 4”. The 3” parallels are perfect for smaller work and there is a variety of widths for different size work pieces. They are nicely hardened and ground and each pair is wrapped in rust preventive paper. I would highly recommend this item.
Scritto da: Riffer
Good buy
I was surprised. I measured four of the 10 pairs and the overall heights were within 0.0003" of the nominal height and were parallel within 0 - 0.0001" The pairs were perfect matches in height and parallelism. Measurements were taken with Mitutoyo micrometers accurate to 0.0001"
Scritto da: 1 Lucky Joe
Excellent Value
Don't know if I just got lucky, but the box was in good shape, no rust, no excessive packing goo & best of all every one measured the same as it's mating bar with uniformity throughout. Very pleased with this purchase & well worth the cost.
Scritto da: Gnes
Perfect for a precision vise.
A very good set of quality parallels. Highly recommended.

Súvisiace produkty

hot
Nylonový valček Matfer Bourgeat
2.5/5

€ 188.38

Nylonový valček Matfer Bourgeat
2.5/5

€ 188.38

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array