Gumové kryty proti poškriabaniu pre veľké zaťaženie na chrániče stola pre kolieska Vozík na stoličky Vozík na ochranu podlahy z tvrdého dreva Kancelárske potreby, 10 ks, sivá

Name: Gumové kryty proti poškriabaniu pre veľké zaťaženie na chrániče stola pre kolieska Vozík na stoličky Vozík na ochranu podlahy z tvrdého dreva Kancelárske potreby, 10 ks, sivá
Brand: Scratch Guard
SKU: 0885377778406
Price: 37.52 EUR
Availability: InStock

Brand:Scratch Guard

2.3/5

€
37.52

Silicone Shield Kitchen & Bath je tesniaci prostriedok prémiovej kvality vyhovujúci špecifikáciám určený pre kuchynské a kúpeľňové aplikácie, ktorý môže byť vystavený vode za 1 hodinu. Použitie na umývadlá, vane, sprchy, toalety, voľné dlaždice, zásteny, dosky, umývadlá a príslušenstvo.

Nie sú k dispozícii žiadne jednotky

EAN: 0885377778406

Kategórie Nástroje a domáce potreby, Hardware,

Buďte v bezpečí – zastavte nehody skôr, ako sa stanú! Najlepšie výsledky dosiahnete, ak použijete kolieska na tvrdých podlahách alebo rohožiach na stoličky a kolieska na tvrdé kolesá na kobercoch. Tieto gumené kolieska na kancelárske stoličky sú užitočné v domácnosti, obchode, garáži alebo lekárskej ordinácii. Multi-Surface – Znížte náklady na údržbu podlahy a predĺžte jej životnosť. Tieto gumené kolieska sa hladko odvaľujú po tvrdých podlahových povrchoch a zabraňujú poškodeniu. Skvelé na drevo, laminát, dlaždice, vinyl, plastovú podložku a koberec alebo koberček s nízkym vlasom. Sada 10 kusov - Každá škatuľka obsahuje desať krytov kolies na pneumatiky na drevené uhlie. To poskytuje dostatok krytov pre kolesá a zároveň ponecháva pár na výmenu v prípade potreby. Tieto gumené kolieska sa ľahko inštalujú a zostávajú pevné a bezpečné. Viacúčelové – fungujú na mnohých nábytkových kolieskach. Sú vyrobené tak, aby vyhovovali 1-3/4 až 2-1/8 palcovým kolieskam. Použite na kolieska stolových stoličiek, stoličky s kolieskami, malé kolieskové vozíky, kolieska na nábytok, stoličky s kolieskami, kolieska na stoly, stoly a ďalšie. Kryty koliesok – vyrobené pre kolieska s tvrdými kolieskami, ktoré poskytujú najlepšiu ochranu drevenej podlahy. Chráňte podlahy pred poškodením kolies. Táto súprava zabraňuje škrabancom, škrabancom, ryhám a ryhám spôsobeným odvaľovaním koliesok stoličky.

Brand	Scratch Guard
Color	Grey
Country of Origin	‎USA
Customer Reviews	3.2 3.2 out of 5 stars 209 ratings 3.2 out of 5 stars
Is Discontinued By Manufacturer	‎No
Item model number	‎87009
Item Weight	0.16 Pounds
Item Weight	‎2.56 ounces
Material	Plastic
Product Dimensions	‎2 x 5.37 x 4 inches
Unit Count	1.00 count

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Flaneuse

Placement requires some effort for 2-inch wheels

I used these wheel covers to rehabilitate 2-inch nylon twin wheel casters hat suffered abrasions from being rolled on outdoors concrete, making them prone to scratching laminate floor surfaces. If your hands are arthritic you'll probably have a bad time putting these on. Fortunately, they provide a snug fit after placement so they don't seem likely to fall off. As the instructions state, heat them up in hot water (tap water is sufficient) so they are more pliable before putting these on larger-sized wheels. I did notice that 5 of these wheel covers had several millimeters more of material on the inner edge of the wheel cover than the remaining 5 covers, so you may need to pair them up to account for this "extra lip" so that the wheels spin freely after placement. These wheel covers provide more resistance to rolling, dampening the rolling sound and making it very difficult to move the chair while seated. In the long term, it remains to be seen if the wheel cover protection plus the reduced movement will lead to reduced scuffing of the floor. Surprised that these seem to be the only product of its type available through Amazon Prime (i.e., no multiple "unbranded" wheel covers sourced from China.) Even more surprised these are "Made in the USA" as stated on the box. Saves me the trouble of putting down a floor mat protector or buying replacement casters with polyurethane wheels and wasting otherwise usable nylon casters.

Scritto da: PF

Replaced rubber on luggage wheels

I was searching for a way to just replace the surface rubber of in-line skate wheels on a piece of luggage, but could only find the whole wheel. My roll-aboard had no way to get to the wheels, so after reading reviews I decided to try these. After soaking in almost-boiling water I was able to stretch them on and they work! We are traveling this month so we'll see if they hold up, but if we need to replace these occasionally, it's far cheaper than buying a new bag.

Scritto da: M. Patel

they fit great! Second

First, if you bought these, you bought them to same some $ and protect your floors. I had doubts that the covers would fit between the wheel and the wheel protector/housing....but after stretching out, they fit great! Second, you get what you pay for, in terms of installation frustratin and time. They will work, but you'll need to invest some elbow grease and some time to get them installed...there is no such things as a free lunch as they say. Oh, and 1+1 =2... I mistakenly ordered only 1 set to cover two chairs...you get 10 pieces, enough to cover 2 wheels per caster for a 5-pronged chair, duh! I'll have to go order another so cover the other chair....I did not order one and determine the utility before ordering another, which might be a good idea for some. Thirdly, these are made in the USA, a plus in my book. Finally. pay careful attention to the reviews about hot water. Soak these in hot water to make them more pliable, the closer to 120 deg. F the better as cooler temps will make installation hell. I suspect you can go hotter (assuming this is TPU material) but they warn against that likely to avoid scalding your hand. Also, trim your fingernails to avoid cussing out the surrounding air when you inevitably break or chip a nail. INSTALLATION: I removed the casters from the chair and worked at a table, soaking 5-6 parts at a time in a large mixing bowl. I used a turkey thermometer to estimate the temperature of the water. To make things easier, I slipped the cover on the exposed wheel end and then rotated the wheel around so that the wheel cover protector/housing will "lock" the covers in place and they won't slip out. Installation was a 3.5 on a frustration scale from 1 to 5, 1 being lego-like easy and 5 being giving up and buying actual TPU wheels/casters. Assembly time was ~ 30 minutes, and you will get more proficient as you work. It does require some significant hand dexterity and finger strength, so a smaller/weaker person will have to ask for help. USE: The wheels noise is considerably damped and the chair rolls across the floor with great grip. We have 3-inch plank cherry wood flooring. I reckon that we'll have to keep the area around the chair clean to avoid scratching the floors from dirt picked up by these covers. These also do not easily roll onto a carpet from a wood floor area...likely due to the grippy nature, but it could be my carpet setup to blame. Overall, a great idea and a good product if you want to go the cheaper route.

Scritto da: Parker

Buyer beware, description not accurate

I bought these thinking that if my caster wheels were 2", surely I could stretch these covers to fit on them snuggly as the range says 1-3/4 to 2-1/8. This despite the other reviews noting how difficult they were to put on. I assumed they were reaching the extreme end of the range at the time. Wrong. I tried putting them in hot water, holding the wheel stems in a vice, and using pliers. They're essentially thick molded rubber circles that doen't stretch at all which I'd bet is for durability. They're approximately molded for smaller 1-3/4" wheels much like you see in their pictures. It's simply not sold according to the description with the range in sizes. So beware, you'll spend $$$ shipping them to your place only to have to spend $$$ shipping them back if you don't have smaller wheels. Better to try to buy them locally before wasting your time and money on the current seller.

Scritto da: NLWPS of Amherst

Made in USA product! (Installation nightmare) Product does work for my needs.

These arrived 7 days early which was a perk. I like that they are made in the USA by a company in Cleveland, Ohio. I got these to go on 4 caster wheels on a wooden table that goes by an armchair in our living room. I just redid the floors in there so I didn't want the newly refinished wooden floors getting scratched by the casters. The table would not need to move very often but, it would be nice to easily move it. With these things on it does move just fine. Getting them on the casters was a bear of a job though. I heated them up and I don't know if the casters are slightly larger than those that go on chairs or what but man! I did two wheels (four stretchy rubbery things) and took a break. Then I returned to do the remaining two wheels. So far these things are doing their job, but the company could make a killing by selling or including some sort of tool to make it easier to stretch these things around the caster wheel to install them. The box says "Installs in seconds" Um... 900 seconds per rubbery thing maybe?!!