Extech SD800 Datalogger CO2, vlhkosti a teploty

Name: Extech SD800 Datalogger CO2, vlhkosti a teploty
Brand: Extech
SKU: 0793950438008
Price: 653.26 EUR
Availability: InStock

Brand:Extech

2.8/5

€
653.26

Zobraziť väčší DATALOGGER CO2/VLHKOSTI/TEPLOTY Monitorujte kvalitu ovzdušia v školách, kancelárskych budovách, skleníkoch, nemocniciach a všade tam, kde sa vytvára vysoké množstvo oxidu uhličitého. Datalogger CO2/vlhkosti/teploty kontroluje koncentrácie oxidu uhličitého a zaznamenáva údaje na 2 GB SD kartu vo formáte Microsoft Excel pre jednoduchý prenos do PC na analýzu. Trojitý LCD displej súčasne zobrazuje všetky tri parametre a voliteľnú rýchlosť vzorkovania dát 5, 10, 30, 60, 120, 300 a 600 sekúnd. Každá uložená hodnota obsahuje dátum a čas. Rozsahy merania: 0 až 4 000 ppm CO2; 10 až 95 percent RH; Teplota -58 až 2372 stupňov F (-100 až 1300 stupňov C). ČO JE V BALENÍ Kompletné so šiestimi AAA batériami, 2 GB SD kartou, univerzálnym AC adaptérom, montážnou konzolou a užívateľskou príručkou. VIAC EXTECH NÁSTROJOV NA VÝBER OD SD500 (zobraziť väčšie) Datalogger VLHKOSTI/TEPLOTY Dataloger vlhkosti/teploty zaznamenáva údaje na 2 GB SD kartu kartu vo formáte Microsoft Excel pre jednoduchý prenos do PC na analýzu. SD500 je vybavený duálnym LCD, ktorý súčasne zobrazuje relatívnu vlhkosť a teplotu a voliteľnú rýchlosť vzorkovania údajov 5, 10, 30, 60, 120, 300 a 600 sekúnd. Každá uložená hodnota obsahuje dátum a čas. 10 až 95 percent RH a 32 až 122 stupňov F (0 až 50 stupňov C) Teplotný rozsah. Kompletný so šiestimi batériami AAA, 2 GB SD kartou, univerzálnym AC adaptérom, montážnou konzolou a užívateľskou príručkou. Zobrazuje barometrický tlak v 3 merných jednotkách: hPa, mmHg a inHg. Trojitý LCD displej súčasne zobrazuje barometrický tlak (10 až 1100 hPa / 7,5 až 825,0 mmHg / 0,29 až 3248 inHg), teplotu (32 až 122 stupňov F / 0 až 50 stupňov C) a relatívnu vlhkosť (10 až 90 percent RH ). Datalogger zaznamenáva dátum/čas a ukladá údaje na 2 GB SD kartu vo formáte Microsoft Excel pre jednoduchý prenos do PC. Voliteľná vzorkovacia frekvencia údajov: 5, 10, 30, 60, 120, 300, 600 sekúnd. Kompletný so šiestimi AAA batériami, 2 GB SD kartou, univerzálnym AC adaptérom, montážnou konzolou a užívateľskou príručkou.

Suma

Pridať do košíka Kúpte teraz

EAN: 0793950438008

Kategórie Priemysel a veda, Test, meranie a kontrola, Rekordéry a zber dát, Záznamníky údajov,

Trojitý LCD displej súčasne zobrazuje CO2, teplotu a relatívnu vlhkosť. Bezúdržbový snímač CO2 s dvojitou vlnovou dĺžkou NDIR (nedisperzný infračervený). Kontroluje koncentrácie oxidu uhličitého (CO2). Zaznamenáva údaje na SD kartu vo formáte Excel.

Alarm	Audible
Alarm	‎Audible
Batteries	‎6 AAA batteries required.
Batteries Included?	‎Yes
Batteries Required?	‎No
Battery Cell Type	‎Alkaline
Brand	Extech
Brand	‎Extech
Country of Origin	‎Taiwan
Customer Reviews	3.7 3.7 out of 5 stars 4 ratings 3.7 out of 5 stars
Included Components	‎Product & Instructions Guide
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	3.1 x 1.3 x 5.2 inches
Item Dimensions LxWxH	‎3.1 x 1.3 x 5.2 inches
Item model number	‎SD800
Item Package Quantity	‎1
Item Weight	0.28 Kilograms
Item Weight	‎0.28 Kilograms
Item Weight	‎9.9 ounces
Manufacturer	‎Extech
Number Of Pieces	‎1
Operating Humidity	90 percent
Operating Humidity	‎90 percent
Part Number	‎SD800
Power Source	Battery Powered
Power Source	‎Battery Powered
Product Dimensions	‎3.1 x 1.3 x 5.2 inches
Sensor Type	Non Dispersive Infrared
Sensor Type	‎Non Dispersive Infrared
Style	SD800
Style	‎SD800
Thickness	‎1 Inches
Upper Temperature Rating	50 Degrees Celsius
Upper Temperature Rating	‎50 Degrees Celsius
Warranty Description	‎6 months

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: McBeardsalot

Misleading product description: Is not battery operated

Be aware that this product is not battery operated. The 6 AAA batteries are only present to keep the date and clock from resetting when you unplug the device from the wall. In order to take measurements and log data, the unit *must* be plugged into the wall. If you do not need to be mobile, this device may work for you. I rate this product as two stars primarily because I believe the product to be misleading. While it does not explicitly state that the unit can run on battery power alone, I have never known any other device to use a full 6xAAA 9v battery bank to power a real-time clock. It is also very typical for CO2/temperature/humidity monitors and dataloggers of this size to run off of batteries or a wall adapter. The response I received from tech support was that it was clearly stated in the documentation that the batteries only power the clock. While this is technically true, the only place where this is stated is on the final page of the user's manual in small print in the subsection that gives details on the required power supply. I would argue that a consumer's due diligence should not have to include reading the full user's manual to the final page. Additionally, the fact that the battery limitation is mentioned at all is evidence that the company realizes this is atypical. Aside from the battery issue, the device is of mediocre build quality and the buttons felt cheap and were not particularly responsive. Each button press is accompanied by a very loud and high pitched chirp, rendering this exceptionally unpleasant to use in quiet locations. I cannot speak to the quality of the data that the device produces, as I will be sending this unit back and ordering a device from a different manufacturer.

Scritto da: hebohero

Did the job but I hate the battery issue!

Good value, does work, clear and easy to use, solid enough, and does not required a special software (Excel file format). However, there is a big issue about the battery! (Warning) this device required to be plugged into a power outlet all the time, although it has 6 high-performance batteries at the same time! Thus, it is not 100% portable. In other words, the device need both power outlet and 6 high-performance batteries duration of use and recoding data! Why it need 6 high-performance batteries? for saving data in case the power is cut! my PC need one tinny flat battery!ooh.. by the way, the device will not work without installing these batteries even if you plug into socket! In addition, I did not like the separated sensor (CO2), its cable is too short and I prefer if the sensor was included the device structure.