Dorman 611-306 matica kolesa M12-1,50 Dometop matica - 19 mm šesťhranná, 37,6 mm dĺžka kompatibilná s vybranými modelmi Ford / Lincoln / Mercury, 10 kusov (OE FIX)

Name: Dorman 611-306 matica kolesa M12-1,50 Dometop matica - 19 mm šesťhranná, 37,6 mm dĺžka kompatibilná s vybranými modelmi Ford / Lincoln / Mercury, 10 kusov (OE FIX)
Brand: ‎Dorman
SKU: 0019495416463
Price: 110.23 EUR
Availability: InStock

Brand:‎Dorman

3.2/5

€
110.23

Tieto matice kolesa sú vyrobené z uhlíkovej ocele a testované podľa náročných noriem automobilového priemyslu, aby sa zaistila pevnosť, dlhá životnosť a bezpečnosť. Táto časť je kompatibilná s nasledujúcimi vozidlami. Pred zakúpením zadajte výbavu vášho vozidla v nástroji garáže, aby ste potvrdili montáž. [Ford Fusion: 2010, 2011] - [Lincoln MKZ: 2010, 2011] - [Mercury Milan: 2010, 2011]

Suma

Pridať do košíka Kúpte teraz

EAN: 0019495416463

Kategórie Automobilový priemysel, Pneumatiky a kolesá, Príslušenstvo a náhradné diely, Spojovacie matice a príslušenstvo, Svorníkové matice,

Uistite sa, že sedí – aby ste sa uistili, že tento diel presne pasuje na vaše vozidlo, zadajte svoju značku, model a úroveň výbavy do garážového náradia. Kvalitné inžinierstvo – navrhnuté v Spojených štátoch a podporené desaťročiami skúseností z automobilového trhu s náhradnými dielmi. Dôkladne testovaný - diel prešiel skúšobným zaťažením, soľným postrekom, testovaním tvrdosti a závitu, aby spĺňal prísne normy. Odolné proti korózii - odstránením dyhy dizajnu OEM matice nie je šanca, že vlhkosť a hrdza spôsobia jej vydutie a deformáciu. Vylepšená konštrukcia – priama výmena, jednodielna konštrukcia matice kolesa vs. dvojdielna továrenská konštrukcia, ktorá často vedie k predčasnému zlyhaniu matice kolesa.

Brand	‎Dorman
Country of Origin	‎China
Customer Reviews	4.2 4.2 out of 5 stars 50 ratings 4.2 out of 5 stars
Drive System	‎External Hex
Exterior	Ready To Paint If Needed
Exterior	‎Ready To Paint If Needed
Fastener Type	Acorn
Fastener Type	‎Acorn
Finish Type	‎Painted
Inside Thread Size	‎M12
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	‎4.81 x 3.63 x 2.19 inches
Item model number	‎611-306
Item Weight	‎1.3 Pounds
Manufacturer	‎Dorman Products
Manufacturer Part Number	‎611-306
Material	Steel
Material	‎Steel
Metal Type	Carbon Steel
Metal Type	‎Carbon Steel
OEM Part Number	‎AE5Z 1012 A; BE5Z 1012 A
Product Dimensions	‎4.81 x 3.63 x 2.19 inches
Thread Size	M12-1.50
Thread Size	‎M12-1.50

5 Star

4 Star

3 Star

2 Star

1 Star

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené^*

Vaše hodnotenie

Scritto da: Michael H.

Has aluminum overcap.

Product was as described. Would have preferred a solid lug nut. As the aluminum overcap deforms leading to rounded flats. Which was my reason for the purchase.

Scritto da: RUTH LOMBARDO

Wheel Nut Set

Worked perfectly for my 2011 Ford Fusion.

Scritto da: rja432

They work, but are cheap

They fit fine but I'm not pleased with the fact that several of the Caps have already come loose. A single piece wheel nut would be so much better. These are Overpriced for what you get, but much less expensive that the Ford dealer.

Scritto da: Cliff B

Worked well with the Ford hubcaps

These Lugnuts were perfect and worked well with the factory Ford fusion hubcaps that are held on by the Lugnuts a little expensive but they did work

Scritto da: Veho123

Worked as advertised. I went through many sets, ...

Worked as advertised. I went through many sets, lots of $ trying find these specific nuts as the shank had to be long enough and the head had to have the chamfer wide enough to hold the plastic hubcap. Carid popped up on my FB one time. I hit it on a whim and found it fit 2005 Ford Fusion.

Scritto da: Mark A.

get them if you are in a pinch, but expect to get OEM replacements

For those that have 2010 Ford Fusion with 5 spoke steel rims, which use hubcaps, these are the lug nuts you are looking for. They look like OEM. I took them to Costco to replace a couple of damaged, worn and replaced lug nuts. Of the 10 that were installed, I believe 6 of the caps ( shiny part that encloses the bolt) fell off: 2 of them when they installed them, 2 of them when I drove home and 2 more over the last couple of weeks. They cost ~ half price from OEM. They do the job, but I would not recommend them. Now my bolts are exposed to the weather.

Scritto da: Joseph A. Maisano

Best deal can find on uncommon nut

Bought for Ford OEM center attached hubs for my plain steel winter wheels. Don't like not a solid (it's capped) design but in the 10 pack way more affordable over dealer.

Scritto da: Ed

I received a replacement package of ten at no cost provided I return the good ones as well as the bad ones

I installed these by hand and torqued to the specified torque. Within several weeks one of the caps was missing and another was almost off. I received a replacement package of ten at no cost provided I return the good ones as well as the bad ones. Since then another cap is missing and another is partially off. The worst part is that when the cap is off it requires a 18 mm wench to remove. My tire wench only has 17 & 19 mm so I need to use a breaker bar with 18 mm socket. Not something that I usually carry in my car so if I have a flat I'd be out of luck. This is a poorly designed cap as the original OEM version rolls the cap around the inside bevel of the nut to keep it on. At least with the original version the caps stayed in place and you could get the nut off with a normal non-metric tire tool. Amazon is now bugging me to send the other replacements back. I'll be sending all of them back as soon as I find another replacement. Then I'll find out how well Amazon is with returns.

Scritto da: uncle buck

Great solid design

Much better than the OE factory lug nuts that are easily susceptible to deforming their shape. These are much better, more solid design