CURT 56190 napájaný 3-to-2-vodičový konvertor zadného svetla prívesu, 4-kolíkový káblový zväzok, čierny

Brand:‎CURT

3.2/5

87.12

Konvertuje 3-vodičový elektrický systém vozidla na štandardnú 2-vodičovú kabeláž prívesu 4-cestný plochý výstup spája zadné svetlá, brzdové svetlá a smerové svetlá Skonštruované s obvodmi SMT pre lepší výkon a odolnosť Farebne odlíšené vodiče pre jednoduchšiu inštaláciu Zaskakovacie zámky pre rýchle, bezpečné spájanie Nevyžaduje sa vysokovýkonný blikač Pribalený kryt proti prachu na udržanie konektora v čistote, keď sa nepoužíva Poznámky: Vyžaduje súpravu vodičov konvertora s napájaním CURT #55151 alebo podobnú Ak vaše vozidlo neposkytuje elektrickú prípojku na pripojenie prívesu, CURT electric konvertuje ponúknuť riešenie. Funkčné zadné svetlá na vašom prívese sú absolútne nevyhnutné pri každom ťahaní a konvertor poskytuje efektívny spôsob, ako správne vybaviť vaše vozidlo na bezpečné ťahanie. Elektrický konvertor CURT, podobne ako naše vlastné káblové zväzky medzi vozidlom a prívesom, poskytuje konektor prívesu na vašom vozidle pripojením do elektrického systému vozidla. Elektrické meniče sú navrhnuté tak, aby sa zapájali priamo do kabeláže zadných svetiel, namiesto toho, aby sa zapájali do rôznych zásuviek, čo im dáva prezývku meniče zadných svetiel. Hoci to vyžaduje trochu práce navyše v porovnaní s vlastným káblovým zväzkom, konvertor koncového svetla ponúka spoľahlivé a dlhodobé riešenie konektora. Tento elektrický konvertor CURT je navrhnutý tak, aby konvertoval 3-vodičový systém na 2-vodičový systém a poskytuje štandardnú 4-cestnú plochú konektorovú zásuvku na pripojenie vášho prívesu. Je navrhnutý tak, aby pasoval do určitých ročníkov Audi Q5 (okrem hybridného), BMW 328i xDrive sedan, BMW X5 SUV, Infiniti M37x sedan alebo Mercedes SLK250 (ak chcete overiť kompatibilitu vášho vozidla, pozrite si príručku aplikácie CURT na curtmfg.com). Tento prevodník je vyrobený pomocou najmodernejších obvodov technológie povrchovej montáže (SMT) s elektrickými komponentmi, ktoré sú namontované priamo na povrch dosky a nie sú vkladané do série otvorov. Obvody SMT majú dlhšiu životnosť, nižší odpor, zníženú tvorbu tepla a sú spoľahlivejšie ako komponenty montované cez otvory. ŠPECIFIKÁCIE PRODUKTU HUB_USA Záruka D25 Jednoročná obmedzená záruka Obtiažnosť inštalácie Ťažký typ dielu 3-na-2 drôtový konvertor zadného svetla Materiál prázdna Prepravná hmotnosť 0,570 Čas inštalácie Presný 60 otočných a brzdových okruhov 7,5 ampérov na okruh Typ koncového svetla 4 výstupné okruhy na okruh -way flat Chránený obvod Áno Napájanie z batérie Áno

ODOLNÉ POČASÍM. Na ochranu tohto konvertora svetla prívesu pred živlami sa dodáva s gumeným prachovým krytom pre 4-kolíkový konektor vodiča, ktorý ho chráni pred dažďom, nečistotami, prachom a ďalšími, keď sa nepoužíva. PRIPRAVENÉ NA INŠTALÁCIU. Tento konvertor svetla prívesu je pripravený na inštaláciu na vaše vozidlo. Obsahuje zaskakovacie zámky na bezpečné pripojenie vodičov a nevyžaduje žiadne vysokovýkonné blikače (vyžaduje sa káblová súprava prevodníka CURT #55151, predáva sa samostatne). FAREBNE ODDELENÉ DRÔTY. Aby bola inštalácia rýchlejšia a jednoduchšia, tento prevodník kabeláže prívesu sa pripojí k vášmu vozidlu pomocou farebne označených vodičov (7,5 A signálový obvod, 7,5 A obvod zadného svetla). ŠTANDARDNÝ VÝSTUP. Tento konvertor zadných svetiel premieňa 3-vodičový elektrický systém vozidla na štandardné 2-vodičové vedenie prívesu a poskytuje štandardnú 4-cestnú plochú zásuvku na pripojenie zadných svetiel, brzdových svetiel a smerových svetiel na ťahanie. SPOĽAHLIVÁ SILA. Tento napájaný 3-na-2-vodičový konvertor zadných svetiel poskytuje spoľahlivú možnosť zapojenia káblového zväzku prívesu, ak pre vaše vozidlo nie je k dispozícii vlastný káblový zväzok prívesu CURT.
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.2 4.2 out of 5 stars 73 ratings 4.2 out of 5 stars
Item model number ‎56190
Item Weight ‎9.1 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56190
Model ‎Taillight Converter
OEM Part Number ‎56190
Product Dimensions ‎9 x 4 x 3 inches

3.2

13 Review
5 Star
56
4 Star
24
3 Star
7
2 Star
7
1 Star
6

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Daniel Demetre
Convert semi truck to RV connector
I bought this converter because I needed to pull my gooseneck trailer(7 pin RV style flat pin plug) with a semi tractor(standard 7 pin round semi plug). A semi tractor uses a separate circuit to operate the brake lights and the turn signals unlike trailers like RVs that are wired to be pulled by an automobile that combine them onto one circuit. Without this converter the brake lights and turn signals would do all kinds of crazy things. This takes the two isolated circuits and combines them for the trailer without affecting the semi tractor lights. I built an adapter harness to go between the semi tractor plug and the trailer plug with the Curt 56190 3 to 2 wire converter in the adapter harness. It worked very well. (obviously there is more to my adapter than just light conversion, but this is what I used for that portion) Note that this is a powered converter! There are non-powered converters available as well. I used this powered converter because of the number of lights on my trailer. It probably wasn't necessary but I wanted to be sure I had enough power to operate them all brightly. So this adapter requires a functional 12v input to power it. Without the power input(always powered when in use) it will not function at all (no lights at all). If you are wanting to pull your RV or trailer with a semi tractor, and need to adapt the lights this will work nicely for your adapter.
Scritto da: Rhick
No instructions For a 2 wire vehicle where the break & turn signals share the same wire.
Cons instructions suck for a 2 wire vehicle where the turn signal & break light signal are on the same wire. Solution= Simply don't use the break light/stop light wire on this kit, just cap it off with a electrical crimp connector & hook up the left and right turn signal wires to each side of vehicle and the park light wire. Pros once you understand the wiring it works great.
Scritto da: Jonas W.
Self explanatory
All the wires are labeled on the device itself. It’s self explanatory. If you can’t figure it out from the picture before you buy it, don’t. The instructions suck balls
Scritto da: W245
Works well but check parts
Worked well but didncome with wire taps. Also, instructions are lacking, but there are good videos online.
Scritto da: TK
Good product, wrong wire connectors for my car.
The unit itself works fine. The connectors are not good on newer cars with rear led lights because the wire is so thin the connectors don't make good contact. I used some old phone wire beans I had laying around, which have a gel in them to protect the connection. Overall I would buy it again. You will also need to buy a roll of wire (18 ga) and an 'add a fuse' to complete the job.
Scritto da: Nash O
Works perfect on e320 2005 CDI Mercedes but...
worked great but was missing the wire splicers and the fuse holder. Had to run to Lowes twice. After that it was perfect. You must watch the online video to figure out what wire go where. With extreme caution took 2 hrs to install plus lowes trips were extra.
Scritto da: joe c.
High Capacity, powered, circuit protected taillight converter
I wish Amazon/Curt would do a better job of describing these things. A chart would be nice. A photo of the front of the packaging (with the useful information) wouldn't hurt either. The heavy duty part means 7.5A each Left / Right Signal circuit. And 7.5A for the separate tails. I don't know how that is supposed to work out using a 10A max fuse. It is "powered" so hopefully won't draw much off of the existing vehicle lighting circuits. Is circuit protected (not mentioned in the description)
Scritto da: matthew benz
Great box but blade fuse connection was faulty????
The flipping fuse connector was faulty straight from the box (hence the 4 star)but everything else worked great. I recommend using the posi-tap connectors instead of the t-tabs. The posi-tap connectors are Way easier to use and an extremely great and secure connection.
Scritto da: Amazon Customer
Some of the best customer service.
Something was wrong. And they replaced it in a minute. Amazing customer service. Can't go wrong with this item
Scritto da: Harnake Bangar
Works well!
Easy to mount, universal wiring. Did the job perfectly.
Scritto da: bill lemay
Does not come with
No battery wire and fuse link included
Scritto da: Carl Cauchon
Très bon produit
Très bonne qualité facile à installer
Scritto da: curtis collins
Five Stars
works great

Súvisiace produkty

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array