CURT 56127 Vlastný 4-kolíkový káblový zväzok prívesu na strane vozidla, pasuje na Mitsubishi RVR, Outlander Sport, Lancer, čierny

Brand:CURT

3.6/5

105.97

Ak vaše vozidlo nie je vybavené elektroinštaláciou na ťahanie prívesu, ideálnym riešením je vlastná kabeláž CURT. Vlastný káblový zväzok – tiež nazývaný T-konektor – je jednoduché elektrické zariadenie typu plug-and-play, ktoré sa zapája do elektrického systému vášho automobilu a poskytuje štandardné univerzálne pripojenie kabeláže prívesu. To sa vykonáva pomocou dvoch alebo viacerých konektorov špecifických pre vozidlo, kompatibilných s OEM, ktoré sa zapoja do zostavy zadného svetla, čím sa eliminuje potreba rezania, spájania a spájkovania počas inštalácie. Vlastné káblové zväzky sú vyrobené pre konkrétne vozidlo, a hoci nie sú dostupné pre všetky vozidlá, ponúkajú jeden z najrýchlejších, najjednoduchších a najbezpečnejších spôsobov zapojenia vozidla na ťahanie. Tento konkrétny zásuvný zväzok poskytuje 4-cestnú zásuvku s plochým konektorom a je navrhnutý ako vlastný káblový zväzok, ktorý sa hodí na určité roky vozidiel Mitsubishi RVR, Outlander Sport a Lancer (pre overenie kompatibility vášho vozidla si pozrite informácie o aplikácii). Dodáva sa so všetkými potrebnými elektroinštalačnými komponentmi na vytvorenie spoľahlivého elektrického pripojenia prívesu, ako aj s protiprachovým krytom, ktorý udrží konektor čistý, keď sa nepoužíva. Máte predstavu o svojom ďalšom cieli – možno je to loď pristávajúca na vašom obľúbenom rybárskom mieste, možno je to kemping s výhľadom na jedno z majstrovských diel prírody alebo možno je to ďalšie veľké stavenisko. Premena tohto obrazu na realitu si však vyžaduje viac než len snívanie. Vyžaduje si to pevné pripojenie a správne množstvo energie. Vlastná kabeláž CURT je vyrobená s použitím najsofistikovanejších technológií v tomto odvetví a je navrhnutá tak, aby sa dala ľahko nainštalovať, čo vám poskytne dlhotrvajúce elektrické pripojenie pre nastavenie vášho ťažného zariadenia.

KRYT PROTI PRACHU. Na podporu dlhodobého používania a odolnosti voči poveternostným vplyvom je tento 4-pólový káblový zväzok na osvetlenie prívesu vybavený gumeným protiprachovým krytom. Keď sa nepoužíva, ľahko sa hodí na 4-cestný plochý konektor a chráni ho pred vonkajšími vplyvmi. SPOĽAHLIVÁ SILA. Tento 4-cestný káblový zväzok prívesu je vyrobený technológiou povrchovej montáže. Tento typ obvodov generuje menej tepla, optimálnu intenzitu svetla a trvácny výkon. ŠPECIFICKÉ VOZIDLO. Tento popredajný zväzok káblov pre vozidlo-príves je navrhnutý pre vybrané roky modelov Mitsubishi RVR, Outlander Sport a Lancer. ŠTANDARDNÝ KONEKTOR. Táto zásuvná 4-plochá kabeláž prívesu môže byť použitá na pripojenie koncových svetiel prívesu, brzdových signálnych svetiel a smerových svetiel. 4-cestné zapojenie osvetlenia prívesu je obľúbené na rôznych prívesoch a pridáva všestranné možnosti ťahania vášho vozidla. JEDNODUCHÁ INŠTALÁCIA. Žiadne rezanie! Žiadne spájanie! Táto súprava káblového zväzku prívesu sa zapája do existujúcej továrenskej kabeláže na vašom vozidle a vybavuje ho štandardným zadným 4-kolíkovým káblovým konektorom prívesu na zapojenie a ťahanie prívesu.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 142 ratings 4.5 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 6 x 3 inches
Item model number ‎56127
Item Weight 1.73 Pounds
Item Weight ‎1.73 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56127
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56127
Product Dimensions ‎9 x 6 x 3 inches

3.6

13 Review
5 Star
71
4 Star
19
3 Star
4
2 Star
2
1 Star
4

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: john zawistoski
Watch car fit,
Was a good quality, but did not fit my car for the year made.
Scritto da: Daniel
Easy to Install!
Overall it’s an easy installation. however you will find running the cable to the battery a little tricky but not super hard if you are resourceful.
Scritto da: James Houghton
Mostly easy to install, except the 12V battery cable
I got this for a Mitsubishi Outlander Sport. The connections to the existing brake light connectors was easy and the instructions were very clear. Mounting the controller was also easy and it is nice that this kit comes with everything you need. The only weird thing was the battery connections wire. If I ran it through the passenger cabin from the trunk area to the front, there was no clear place to get a wire into the engine compartment without a lot of work. Fortunately I was able to poke it through a rubber grommet in the rear compartment and run it under the car to the battery. There were enough zip ties included to secure the cable from the rear to the front adequately, but I would recommend adding a few additional zip ties just to be sure. The controller worked perfectly when I connected it to my trailer and despite the extra work in getting it installed, I am quite happy with the results.
Scritto da: Wade
Works great
Works exactly as I would've hoped, installation was a bit hard, the interior panels in the trunk had to be removed, and I had to come up with my own power source in the trunk for the wires, it would've been very hard to get a power wire from the trunk to the battery like the instructions say. I had no plans of drilling holes in the car. Overall works great to run the lights for our jetski trailer
Scritto da: Chad R Baxter
Complicated Install
Makes you run a power wire from the battery all the way to the back of the vehicle for power, shouldn't be a need for this. Should draw power from the tail lights you splice into
Scritto da: C. Lane
Simple to install and works!
Hardest part was running wire to battery, everything else is plug and play!
Scritto da: jim
Great product
Great product
Scritto da: Todd Whipple
Plug and play EXCEPT for the wire to the battery.
As noted in other reviews, the instruction don't provide anything for running the power cable to the battery, which take twice the time as all the rest of the attachments, accomplished in 45 minutes. This is the only reason I didn't give it 5 stars. It would have been much worse if I wasnt able to jack the car up (2014 Mitsubishi Outlander Sport). I looked at the possibility of running under the base boards, but that looked like even more work and I could locate a place under the dash to easily run the wire.
Scritto da: jonathan ml
Works great for my 14’ Lancer
Installed it in a rush before a trip. Took 30 minutes to install, instructions are a bit too generic because my Lancer had the plugs on the right and left side instead of only on the left side. You do not need to remove the taillight assembly on these car, skip this step on a Lancer. Double sided tape was so old it was not sticky anymore. All over I like it because it was easy to install. I decided to wire the battery wire to a cigarette plug instead of trough the engine bay and to the battery directly. Con’s: Sticky tape was bad, wrong instruction for a lancer, routing the batt wire will be a pain trough the firewall.
Scritto da: bob
wireing
very nice working well just the black wire from front of battery to the box a big job taking all the trims off a and passing the firewall but for the rest its ok
Scritto da: Begoodjohnny
Easy install
Easy install, fit perfectly. Working great!
Scritto da: Dalton Russell
Works great, easy install besides running a power wire from the battery
Works flawlessly, the install is simple and easy with the exception of running a power wire from the battery. Would have preferred not to have to run power from the battery but it is what it is.
Scritto da: Daniel Caron
great product
works on my 2015 RVR, easy to connect, everything included :) the only downside, is to run a Power from the battery to the trunk. installation time, approx 45 mins.

Súvisiace produkty

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array