CURT 56020 Vlastný 4-kolíkový káblový zväzok návesu na strane vozidla, pasuje na vybrané modely Ford E-150, E-250, E-350 Super Duty

Brand:CURT

3.6/5

77.52

Ak vaše vozidlo nie je vybavené elektroinštaláciou na ťahanie prívesu, ideálnym riešením je vlastná kabeláž CURT. Vlastný káblový zväzok – tiež nazývaný T-konektor – je jednoduché elektrické zariadenie typu plug-and-play, ktoré sa zapája do elektrického systému vášho automobilu a poskytuje štandardné univerzálne pripojenie kabeláže prívesu. To sa vykonáva pomocou dvoch alebo viacerých konektorov špecifických pre vozidlo, kompatibilných s OEM, ktoré sa zapoja do zostavy zadného svetla, čím sa eliminuje potreba rezania, spájania a spájkovania počas inštalácie. Vlastné káblové zväzky sú vyrobené pre konkrétne vozidlo, a hoci nie sú dostupné pre všetky vozidlá, ponúkajú jeden z najrýchlejších, najjednoduchších a najbezpečnejších spôsobov zapojenia vozidla na ťahanie. Tento konkrétny zásuvný zväzok poskytuje 4-smernú zásuvku s plochým konektorom a je navrhnutý ako vlastný káblový zväzok, ktorý vyhovuje určitým ročníkom modelov Ford E150, E250 a E350 Super Duty (pre overenie kompatibility vášho vozidla si pozrite informácie o aplikácii). Dodáva sa so všetkými potrebnými elektroinštalačnými komponentmi na vytvorenie spoľahlivého elektrického pripojenia prívesu, ako aj s protiprachovým krytom, ktorý udrží konektor čistý, keď sa nepoužíva. Máte predstavu o svojom ďalšom cieli – možno je to loď pristávajúca na vašom obľúbenom rybárskom mieste, možno je to kemping s výhľadom na jedno z majstrovských diel prírody alebo možno je to ďalšie veľké stavenisko. Premena tohto obrazu na realitu si však vyžaduje viac než len snívanie. Vyžaduje si to pevné pripojenie a správne množstvo energie. Vlastná kabeláž CURT je vyrobená s použitím najsofistikovanejších technológií v tomto odvetví a je navrhnutá tak, aby sa dala ľahko nainštalovať, čo vám poskytne dlhotrvajúce elektrické pripojenie pre nastavenie vášho ťažného zariadenia.

KRYT PROTI PRACHU. Na podporu dlhodobého používania a odolnosti voči poveternostným vplyvom je tento 4-pólový káblový zväzok na osvetlenie prívesu vybavený gumeným protiprachovým krytom. Keď sa nepoužíva, ľahko sa hodí na 4-cestný plochý konektor a chráni ho pred vonkajšími vplyvmi. JEDNODUCHÉ UCHOVÁVANIE. Zapojenie káblov prívesu a svetiel prívesu je jednoduché vďaka ergonomickému dizajnu tejto automobilovej zásuvky. Má výstupky na vrchnej a spodnej strane pre lepšie uchopenie pri pripájaní k prívesu alebo odpájaní. ŠPECIFICKÉ VOZIDLO. Tento popredajný zväzok káblov pre vozidlo-príves je navrhnutý pre vybrané roky modelov Ford E 150, E 250 a E 350 Super Duty. ŠTANDARDNÝ KONEKTOR. Táto zásuvná 4-plochá kabeláž prívesu môže byť použitá na pripojenie koncových svetiel prívesu, brzdových signálnych svetiel a smerových svetiel. 4-cestné zapojenie osvetlenia prívesu je obľúbené na rôznych prívesoch a pridáva všestranné možnosti ťahania vášho vozidla. JEDNODUCHÁ INŠTALÁCIA. Žiadne rezanie! Žiadne spájanie! Táto súprava káblového zväzku prívesu sa zapája do existujúcej továrenskej kabeláže na vašom vozidle a vybavuje ho štandardným zadným 4-kolíkovým káblovým konektorom prívesu na zapojenie a ťahanie prívesu.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.6 4.6 out of 5 stars 190 ratings 4.6 out of 5 stars
Exterior ‎Smooth
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 3 inches
Item model number ‎56020
Item Weight 0.71 Pounds
Item Weight ‎11.4 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎56020
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎56020
Product Dimensions ‎9 x 4 x 3 inches

3.6

11 Review
5 Star
80
4 Star
8
3 Star
5
2 Star
2
1 Star
5

Napíšte svoju recenziu

Váš email nebude zverejnený. Všetky povinné polia sú označené*

Scritto da: Kel
Worked great!
This worked great for my 2008 e350 ford. The instructions didn't work for my passenger model though. I had to follow a video from etrailer, this harness is almost the same as theirs but it doesn't have the long wire for ground (so it's much easier to install).
Scritto da: JDeMattos
Hyperflash on left signal ONLY.
Plug and play harness. Instructions are pretty vague but it’s not rocket science. They essentially “piggyback” off of the stock tail light bulbs. They should label right and left. Thankfully I tested before reinstalling everything and figured out I had it backwards. Right signal works as it should on my van and my trailer but left signal is blinking twice as fast or what’s known as “hyperflash”. All lights are operable so it sure why only one side is flashing faster than the other. Docked a star for that. Other than that, works as it should.
Scritto da: KL
Works but seems poorly planned
We installed this in a 2014 E350. It works well enough and it IS worth it simply for the factory style plugs at each tail lamp. However, the right (green/white) side was too short (at least for how I chose to install it) and the left (yellow/brown) was inexplicably long - VERY long. I actually wound up splicing in about 2' of green and white wire, so you might consider having some green and white primary wire on hand along with some butt connectors. Note the included instructions talk about slitting a grommet but I could not locate said grommet and it was not mentioned in the YT video, either. I was simply able to run through a hole where the taillight wires entered and down behind the plastic trim of the last pillar, then under the kick plate. The hole did not feel like it had any sharp edges and actually felt nicely finished. Now, from the kick plate I took advantage of 2 oval slits next to the door striker. I believe other reviewers have alluded to this as well. I put all 4 wires of this harness in plastic loom to protect them as they pass down through the body. Our vehicle had a tapped hole in this area as well that had a plastic thumb screw of sorts. I used a 3/8" insulated rubber clip around my plastic loom and replaced the thumb screw with a standard M6x1.0 bolt, see pic. You will have to trim some rubber "grips" off the plug to get it thru the oval holes. These are just there for human finger comfort and serve no important purpose. From here I ran the plug under my hitch and again secured the wiring with an insulated rubber clip.
Scritto da: Carlos Carlo
Easy to install and have trailer lights
Not too much to say about this other than it went in easy hooked up easy and works fantastic. One thing I think could be better is a little more detailed instruction and maybe color-coded step by step instruction be nice but not really necessary it's definitely worth purchasing this kit and installing it in your van so you have trailer lights it's pretty cool
Scritto da: James M. Droddy
Perfect fit
Fit perfectly. Just takes some time to install on the van since you have to run the wiring to both lights. However, works perfectly.
Scritto da: Notso
1 tool required
I just needed a hex bit to remove my tail lights then these were plug-n-play. Fantastic kit. Saved me the time of splicing wires etc...
Scritto da: T in florida
Easy to install vehicle trailer harness
The harness was incredible simple to install on a 2013 Ford E-350 full size van
Scritto da: Roger Ferrer
Muy bueno
Muy bueno
Scritto da: mike
Great product
Very simple plug and play ! Highly recommend
Scritto da: GERARD ARSENAULT
nice set up
foul proof 15munute job
Scritto da: Amazon Customer
Easy install and works.
Straightforward to install and worked as expected.

Súvisiace produkty

Objavte našu medzinárodnú sieť

Dodávame do 28 krajín, viac ako 200 000 produktov. Zostaňte informovaní, prihláste sa na odber noviniek.

Array